Weld Fabricator
Rapid-Line, Inc.
Job Description
Job Description
Description:
The Weld Fabricator/Robot Technician is responsible for fabricating, welding, finishing, and inspecting metal components according to drawings, specifications, and production requirements. This role performs TIG welding on stainless steel and aluminum, operates welding equipment, and programs and operates robotic weld cells. The Weld Fabricator/Robot Technician is responsible for producing quality parts safely and efficiently while supporting production schedules and maintaining a clean and organized work environment.
Key Responsibilities
- Weld aluminum, stainless steel, cast iron, and other alloys using appropriate welding processes
- Perform TIG welding on stainless steel and aluminum in a production environment
- Program, set up, and operate Motoman robotic weld cells
- Operate welding equipment and select appropriate welding methods and equipment
- Read and interpret engineering drawings, blueprints, specifications, sketches, and work orders
- Determine proper welding and fabrication methods based on material, geometry, and job requirements
- Use measuring tools such as calipers, rulers, combination squares, and straightedges to verify dimensions
- Clamp, position, tack-weld, bend, grind, and bolt components to achieve required configurations
- Monitor welding and fabrication processes to prevent overheating, warping, distortion, and other defects
- Inspect completed work pieces using templates, measuring instruments, and visual inspection methods
- Identify defective materials, faulty equipment operation, or quality concerns and notify the Supervisor
- Remove excess weld, slag, and spatter using hand and power tools
- Grind, sand, clean, and polish parts to remove defects and prepare surfaces for finishing
- Select appropriate abrasives and finishing methods based on material and job requirements
- Mark or tag materials and completed parts with job numbers, piece marks, and other required identification
- Record required production and processing information on job packets and other documentation
- Move materials, equipment, and completed products between work areas using a hand jack or other approved equipment
- Clean materials and prepare surfaces for production
- Clean welding equipment and work areas at the end of each shift
- Follow all safety procedures, PPE requirements, and safe work practices • Assist in other areas of the shop as needed
- Perform other duties as assigned by the Supervisor
Qualifications
- Demonstrated ability to TIG weld stainless steel and aluminum in a production environment
- Ability to pass a hands-on welding test and written general knowledge test
- Ability to read and understand blueprints and technical drawings
- Good hand-eye coordination and manual dexterity
- Strong attention to detail and commitment to quality
- Ability to use basic measuring tools and hand/power tools
- Ability to communicate effectively with coworkers and supervisors
- Ability to work independently and as part of a team
- Ability to work in other areas of the shop as needed
- Ability to follow safety requirements and standard operating procedures
- Ability to work overtime when approved and scheduled
Experience
- Minimum of 3 years of welding experience preferred
- One to three years of manufacturing experience preferred
- Experience with TIG welding of stainless steel and aluminum preferred
- Experience operating or programming robotic welding equipment preferred
- Experience with metal finishing and grinding preferred
Education
- High school diploma or equivalent
- Technical or welding education preferred
- National Institute for Metalworking Skills (NIMS) certification preferred
Physical / Work Environment Requirements
- Ability to stand and walk for extended periods throughout the work shift
- Ability to lift, carry, push, and pull materials and components weighing up to 50 pounds
- Frequent bending, reaching, twisting, kneeling, and positioning of materials
- Ability to safely perform welding, grinding, finishing, and fabrication activities
- Ability to work around welding equipment, robotic cells, machinery, metal, sparks, heat, fumes, and typical manufacturing noise
- Ability to safely operate hand tools, power tools, welding equipment, and material handling equipment
- Required to wear appropriate PPE, including welding protection and other required protective equipment
- Ability to safely work around moving equipment and other employees in an active manufacturing environment
- Ability to maintain awareness of surroundings and follow all facility safety requirements
- Maintain a clean, organized, and safe work area
- Ability to work overtime when approved and scheduled
- ...Fabricator WelderReports To: Department LeadJob PurposeThis position fabricates and builds the test chamber’s structural frame through following... ...engineering drawings. This position uses raw steel to MIG weld a structural steel frame per specs.Duties and...Suggested
- ...Job Title: Fabricator Welder Reports To: Department Lead Job Purpose This position fabricates and builds the test chamber's... ...mechanical engineering drawings. This position uses raw steel to MIG weld a structural steel frame per specs. Duties and...Suggested
- ...work pieces from conveyors and bunks to assist in fitting and welding. Able to lift 50 pounds. Measures and marks reference points using... ...for moving by crane or jib. Cleans and grinds metal before fabricating, welding, painting, or shipping. Picks up and removes scrap...SuggestedTemporary workDay shift
$47k - $72k
...Job Description: Weld Technician | Grandville, MI Salary Range: $47,000 - $72,000 depending on experience Are you a skilled... ...quality standards. Prior experience in automotive or metal fabrication plants. Ability to weld multiple processes or materials....SuggestedImmediate startShift work- ...door and hardware company and we are looking to fill a first shift fabricator/welder position. This position will be responsible for a wide array of tasks including cutting, drilling, grinding, welding, etc. Qualifications needed are: *a good attitude, and a willingness...SuggestedDay shift
- ...Letter Fabricator Position: Letter Fabricator Classification: Full-Time, Regular Schedule: Monday-Thursday, 6:00 AM-4:00 PM, with potential overtime on Fridays About the Position We are looking for a dependable, detail-oriented Letter Fabricator to...Full time
- ...Job Description Job Description Fabrication and installation of solid surface. Using a variety of tools to shape and fabricate custom solid surface countertops, sills, sinks. perform on site templating and installation of solid surface materials, including support...Full time
- ...Job Description Job Description Currently hiring for a Fabricator at a steel company is responsible for cutting, shaping, assembling, and welding metal components to create structures, machinery, or other products. The job typically includes the following duties:...Currently hiringAfternoon shift
$27 - $51 per hour
...Shift:7:00 am to 5:00 pm Monday - Friday To provide general construction labor tasks, in an efficient and safe manner, as part of a welding crew to erect precast concrete panels. Safety boot & prescription safety eyewear reimbursement Salary Range: $27 - $51/hour Key...Permanent employmentFull timeLocal areaMonday to FridayShift workNight shift- ...Job title : Welder Fabricator Reports to : Director of Fabrication Supervisory responsibilities : N/A Summary/objective : Steel Craft... ...position requires thorough knowledge of fabrication practices and welding procedures. Experience with thick plate weldments is a plus....Full timeTemporary workDay shift
- ## Fabrication OperatorApplyremote type: Onsitelocations: Grand Rapids, MItime type: Full timeposted on: Posted Yesterdayjob requisition id: R-100847**About The Kendall Group**The Kendall Group is comprised of eight divisions with 75+ locations in ten states. Combined,...Work experience placementWork at officeLocal areaShift work
$20 per hour
...Peoplelink Staffing, in partnership with a full service fabrication shop in Grand Rapids, is looking to add welder/fabricators to their... ...work pieces from conveyors and bunks to assist in fitting and welding Measures and marks reference points using a tape measure for...Weekly payShift workAfternoon shift$26 - $42 per hour
...for advancement.We are currently seeking an experienced Welder/Fabricator to support the assembly and installation of new wastewater... ...water treatment solutions.Requirements:2–3 years of hands-on welding and fabrication experience.Proficient in pipe fitting, flux core...Hourly pay$25 - $30 per hour
...emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope: MIG, Flux, and Flat Welding Air Arc Repair Welding Pipe & Mechanical Flat/Vertical Carbon Steel Requirements: Basic Tools for the Trade...Work at officeDay shift$19.5 - $21.5 per hour
...Welder/Fabricator Join Our Manufacturing Team and Build a Rewarding Career! Compensation & Shift Details: Hourly Rate: $ 1... ...to determine job specifications. Position, align, fit, and weld parts according to blueprints and layout specifications. Design...Hourly payFlexible hoursShift work$28 per hour
...Job Title: Welder/Fabricator Shift: 1st Shift Pay: Up to $28/hr. Location: Wyoming, MI Job Overview: Seeking an experienced Welder/Fabricator... ...a fast-paced shop environment. This role is responsible for welding, fitting, fabricating, and assembling miscellaneous metal and...Shift workDay shift- ...position on the 1st shift for one of our clients (DIRECT HIRE). Job Summary: As a Welder, you will be responsible for performing various welding techniques to join metal parts and components together. You will work with a variety of materials, including steel, aluminum, and...Full timeMonday to FridayDay shift
$19.5 - $21.5 per hour
...Join Our Manufacturing Team as a Skilled Welder/Fabricator and Forge a Rewarding Career! Compensation & Shift Details: Hourly Rate... ...to guide your work. Precisely position, align, fit, and weld components in accordance with layout and blueprint specifications...Hourly payMonday to FridayFlexible hoursShift work$25 per hour
...Job Title Under minimal supervision, sets up and operates welding equipment. Essential Duties And Responsibilities Operates... ..., plasma cutter, grinders, brake, shear, saw and other metal fabricating equipment. Welds or fabricates a variety of materials,...Hourly payFull timeRelocationDay shift- ...Description Custom Shop / Miscellaneous Metal: We are a growing fabrication shop, and we are looking for a talented fabricator. This... ...responsible for a wide array of tasks including fabricating, welding, cutting, drilling and painting. Qualification needed are:...For contractors
$22 - $26 per hour
...Mig WelderJoin our team and put your welding skills to work! We're looking for a reliable, skilled MIG Welder ready to build quality... ...today!We are a small manufacturing company, hands-on welding and fabrication shop specializing in the manufacturing of industrial equipment...Temporary workMonday to FridayShift work$30 - $60 per hour
...Job Description This role combines high-quality TIG pipe welding with precision pipefitting for commercial and industrial projects... ...must be comfortable working at heights on overhead piping, in fabrication shops for weld testing, and in field locations where...Weekly payContract workTemporary workDay shift$24 - $26 per hour
...NSC Staffing Has Immediate Mig Welding OpportunitiesNSC Staffing is hiring an experienced Sheet Metal Fabricator/Welder for a well established HVAC duct manufacturing company in the Grand Rapids area.This is a hands on fabrication role focused on producing rectangular,...Immediate start- ...Schedule: 5:00am - 1:00pm Job Summary: The Welder will be responsible for performing various tasks, which may include MIG/TIG welding and metal finishing. The role requires a high level of precision and expertise in metalworking, with a focus on creating high-...Work at officeFlexible hoursDay shift
$19 per hour
...through ITS upon hire! Responsibilities Perform precision TIG welding on foam components Assemble foam parts according to... ...precise welds Basic math and measuring skills Manufacturing, fabrication, or assembly experience preferred Excellent attention to...Immediate startShift workDay shift$25 - $33 per hour
...Description: 1st Shift Salary: $25.00 to $33.00 per hour The Welder/Fabricator performs MIG and TIG welding and fabrication of cabinet components used in the construction of custom environmental test chambers. This position will also assist in assembly of environmental...Hourly payDay shift- ...Reads and interprets basic blueprints, drawings, and work instructions to plan welding operations. Performs basic welding equipment setup to produce fabricated components. Prepares materials for welding by cleaning surfaces and fitting components. Inspects completed welds...Shift workNight shift
$26 - $32 per hour
...to main electrical enclosures and terminals. Junction Boxes: Fabricate custom mounting brackets and wire junction boxes to ensure... ...Competence in print reading and blueprint understanding. TIG welding and mechanical assembly skills. Work Environment This...Weekly payContract workTemporary workMonday to FridayShift workDay shift$20 per hour
...in Byron Center, MI. This role is responsible for setting up welding equipment, preparing materials, performing welding operations,... ...Candidates with experience operating welding robots or other fabrication equipment are preferred. Key Responsibilities Read...Hourly payShift workNight shift$17 - $17.5 per hour
Job Description Job Description Job Description: Assembler/Welder Location: Walker, MI Compensation Starting wage is $17.00-$17.50 per hour, based on skill level and experience. Location Note This role is currently based in Walker, MI, with a planned...Hourly pay
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Weld Fabricator. Be the first to apply!



