Sheet Metal Mechanic
$24 - $33 per hourMechanical Engineering and Construction Corporation
Job Description
Job Description
MECHANICAL ENGINEERING & CONSTRUCTION CORPORATION
Job Title: Sheet Metal Mechanic Department: Sheet Metal (MD)
Grade: High level Journeyman or Master Supervisor: Sheet Metal Superintendent
$24 - $33 per hour Full-time
- Health Insurance
- Dental Insurance
- Vision Insurance
- Paid holidays
- Paid time off
- Paid training
- 401(k)
POSITION SUMMARY
Is responsible for and has complete knowledge of roof top HVAC systems including layout, assembly, and installation of equipment curbs, complete low pressure VAV air systems, and medium air pressure systems.
ESSENTIAL FUNCTIONS
- Read plans to perform necessary work
- Perform layouts
- Perform take-offs
- Draw and measure tie-ins
- Maintains a complete set of tools
ADDITIONAL RESPONSIBILITIES
- Responsible for assets used on job site
- Holds a valid driver’s license
- Make purchases at local supply houses according to Company procedure
- Other duties as assigned
EDUCATION AND EXPERIENCE
- Completed a four-year apprenticeship in specified field.
- Journeyman’s license
- CFC Universals
- Experience with rectangular, spiral, and oval duct assembly and installation.
- Minimum two+ years commercial HVAC sheet metal experience as a mechanic.
KNOWLEDGE, SKILLS, AND ABILITIES
- Able to run projects
- Ability to understand written sentences and paragraphs in work-related documents
- Able to use logic and reasoning to identify the strengths and weaknesses of solutions and approaches to problems
- Able to perform mathematical calculations
- Knowledge of tools and equipment needed to complete a job
PHYSICAL AND MENTAL JOB REQUIREMENTS
- Able to lift up to 60 pounds.
- Spend long periods of time standing
- Ability to climb ladders to perform work
- Work in high elevations
WORKING CONDITIONS
- Periodic travel to multiple job locations
- May be subjected to inclement weather and hazardous working conditions
- Work weekend or night-time duty, as needed
NOTE
This job description describes the reporting relationship, the essential functions of the job (duties/tasks/responsibilities), and additional job requirements including: education/experience, knowledge/skills/abilities and physical/mental job requirements. From time-to-time, employees may be required to perform other duties as assigned.
Gmail Users: If you do not receive a confirmation email after completing your application, please check your Spam folder just in case the confirmation email was delivered there instead of your inbox. If so, select the confirmation message and click Not Spam, which will allow future messages to get through. For assistance, please contact the Human Resources department at View phone number on ziprecruiter.com.
#IND1
$24 - $33 per hour
...Sheet Metal MechanicMechanical Engineering & Construction CorporationJob Title: Sheet Metal MechanicDepartment: Sheet Metal (MD)Grade:... ...Minimum two+ years commercial HVAC sheet metal experience as a mechanic.Knowledge, Skills, and AbilitiesAble to run projectsAbility to...SuggestedHourly payApprenticeshipLocal areaNight shiftWeekend work$25 per hour
...Sheet Metal Mechanic We are seeking an experienced Sheet Metal Mechanic with a background in architectural sheet metal installation, including standing seam roofing and exterior metal systems. This position focuses on commercial applications requiring precision, craftsmanship...SuggestedHourly pay$35 per hour
...Job Description Job Description Sheet Metal Mechanic/Duct Installer ~$35/hour ~ Cockeysville/Baltimore Area ~ Monday - Friday 6am - 2pm Job Description Commercial new construction and fit out projects taking place in the Baltimore and surrounding area...SuggestedWeekly payContract workTemporary workFor subcontractorImmediate startMonday to Friday$50k
...has established us as one of the most esteemed full service mechanical contractors in the Mid-Atlantic region. We are the preferred... ...to offer innovative solutions for any project, ranging from sheet metal fabrication to complete modular systems. We have offices located...SuggestedTemporary workFor contractors- ...Job Description Job Description Commercial HVAC Sheet Metal Mechanic We’re hiring an experienced Commercial HVAC Sheet Metal Mechanic who knows how to install commercial HVAC systems correctly, efficiently, and with pride in their work. We are looking for...SuggestedHourly pay
- ...Aircraft Mechanic RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE REQUIRED FOR START: No CLEARANCE TYPE: Secret... .... Primary Function: Plan, perform and coordinate all aircraft sheet metal fabrication activities, aero structure assembly, and support...RelocationDay shift
- ...Job Description Job Description Sheet Metal Foreman / Lead HVAC Installer Control Tec Mechanical LLC is looking for an experienced Sheet Metal Foreman / Lead HVAC Installer to join our team serving commercial projects throughout the Maryland, Washington, DC...For contractors
$28 per hour
...seasoned, highly experienced Mill Machinist at the top of their trade, and also an operator. Requirements: Extensive machine shop/metal working skills – specifically on CNC Mills. Operate machines to produce quality, precision, cost-effective machined parts on a...Hourly payFull timeWork experience placementWeekend work- Benefits: Bonus based on performance Competitive salary Flexible schedule Opportunity for advancement About the Role: New Day Health Systems in Catonsville, MD is looking for a passionate and dedicated PRP Worker - Rehabilitation Coordinator to join our team. In this rewarding...Work from homeFlexible hours
- Workers' Compensation Associate Based in Columbia, MD, we are a multidisciplinary litigation firm known for our client-focused approach, collaborative culture and commitment to delivering practical results. The Maryland office is expanding and seeking an experienced...Work at office
- Company Description The Law Offices of Steven H. Heisler is a plaintiff-focused firm concentrating on injury cases, including Workers’ Compensation, auto accidents, personal injuries, and product liability matters. Located in Baltimore, Maryland, the firm represents injury...Full timeWork at office
- Job Description Job Description Read, interpret and follow blueprints, geometrical tolerance, diagrams, engineering drawings, specifications, bills of materials, and other written instructions or procedures to accurately assemble equipment and products. Experience...Shift work
- Job DescriptionPosition Purpose:Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units
- A bit about us: JOB DUPLICATED under different client. Please update this section! Why join us? JOB DUPLICATED under different client. Please update this section! Job Details J.D. from an accredited law school. Admission to the Maryland Bar in good...Local area
$100k - $180k
Workers Compensation Attorney $100000 - $180000 per year | Baltimore, MD | On-site | Permanent Plaintiff Side Personal Injury and Workers Compensation Law Firms Seeks Talented Attorney Job Details J.D. from an accredited law school. Admission to the Maryland Bar in good...Permanent employmentLocal area$42k - $70k
Job Description Job Description Description: Hassan, Hassan & Tuchman, PA hiring a paralegal or legal assistant to help its worker's compensation practice dedicated to helping Claimants get fair compensation for injuries they sustained on the job. Hassan, Hassan &...- The Law Offices of Steven H. Heisler in Baltimore, MD is seeking a full-time on-site Workers’ Compensation Paralegal. You will support attorneys across all phases of workers’ compensation cases, draft and file documents, organize case files, and track deadlines. Responsibilities...Full time
$19.5 per hour
Job Description Position Purpose: Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained...Local area$65k - $90k
...customers to offer preventative maintenance agreements. Requirements If you have great people skills, proven sales experience, mechanically inclined, and are a proven problem solver, we want to talk to you! Benefits At Roto-Rooter we believe our greatest...- Job Description Job Description Baltimore Law Firm Seeking an Experienced Workers' Compensation Paralegal In order to be considered for the position you must have at least 3 years experience in the field of WCC. We offer a competitive salary, excellent benefits...
- Job Description Job Description Franklin & Prokopik (F&P) is recruiting for a full-time Workers’ Compensation Paralegal in our Baltimore office. We are looking for an individual that is service-oriented and has a sense of urgency and responsiveness, operates with integrity...Full timeWork at office
$20 - $25 per hour
...long-term career with a successful, growing, and team-oriented metal fabrication company? Our client in Elkridge, MD, is seeking a motivated... .... Operate the press brake to accurately bend, form, and shape sheet metal. Quality Assurance: Inspect finished parts using...Full timeTemporary workMonday to Friday- CNC Machinist About the Role The CNC Machinist independently sets up and operates machining centers to produce precision components that meet defined quality standards, tolerances, and production timelines. This role supports efficient manufacturing by translating engineering...Afternoon shift
- CNC Machinist Growing advanced manufacturing company in Glen Burnie, Maryland seeking Lathe Machinists IV (1st and 2nd Shifts) to join their team! Shifts Available: - 1st Shift, 7:00 - 3:30PM - 2nd Shift, 3:00 - 11:30PM Compensation: $32-$50+ per hour, based on...Hourly payLocal areaRelocation packageShift workDay shiftAfternoon shift
$40 - $57 per hour
...-code issues (incorrect rotary axis output, canned-cycle mismatches, offset errors) down to the root cause. Produce clear setup sheets and documentation - tool lists, work offset/plane assignments, and setup notes - that let another programmer or machinist run the job...$27 - $33 per hour
...testing, and troubleshooting activities in a small manufacturing environment. This role combines hands-on machining with electro-mechanical assembly, data analysis, and collaboration across production, inventory, and customer service functions to ensure reliable, efficient...Contract workTemporary workWorldwide- ...electronic enclosures, cooling plates, flight data recorder housings, battery boxes, satellite panels, display surrounds, nose cones, and metal GPS components. Applicants can expect to work in a high-mix, precision-focused environment that supports complex aerospace and...Full time
- ...Ability to interpret blueprint/technical drawings and follow travelers ~ Experience using CNC programming software (Mastercam) ~ Mechanical ability and understanding of engineering principles ~ Understanding of part tolerances. ~ Ability to review, understand and...Temporary work
$27 - $33 per hour
...testing, and troubleshooting activities in a small manufacturing environment. This role combines hands-on machining with electro-mechanical assembly, data analysis, and collaboration across production, inventory, and customer service functions to ensure reliable, efficient...Weekly payContract workTemporary workWorldwideMonday to FridayShift work$35 - $50 per hour
Job Description Job Description Apply CNC Machinist Glen Burnie, Maryland - Posted on November 11, 2026 Published By Catrina Reed Growing advanced manufacturing company in Glen Burnie, MD seeking CNC Machinists (1st and 2nd Shifts) to join their team! ...Hourly payApprenticeshipLocal areaRelocation packageShift workDay shiftAfternoon shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Sheet Metal Mechanic. Be the first to apply!



