Rigger

Rigger (Full Time) Location: Madison Heights Department: Crane Summary Assembles rigging to lift and move equipment or material in manufacturing plant, shipyard, or on construction project by performing the following duties. Essential Duties and Responsibilities include the following. Other duties may be assigned. 1. Has practical knowledge of Regulatory Compliance with local, state, and federal Occupational Safety and Health Administration (OSHA) and Department of Transportation (DOT) rules and regulations, CSE, Inc. Rules and Regulations and Site-Specific Rules and Regulations. a. Works within AISC Certification Procedures. b. Familiar with and enforces strict compliance with all QA/QC and Safety procedures. c. Trained to safely operate forklifts, JLG type man-lifts, scissor-lifts and similar equipment. d. Controls movement of heavy equipment through narrow openings or confined spaces, using chain falls, gin poles, gallows frames, and other equipment. e. Dismantles and stores rigging equipment after use. f. Fabricates and sets up repair rigging, supporting structures, hoists, and pulling gear, using hand and power tools. Manipulates rigging lines, hoists, and pulling gear to move or support materials such as heavy equipment, ships, or theatrical sets. g. Selects gear such as cables, pulleys, and winches, according to load weights and sizes, facilities, and work schedules. h. Signals or verbally direct workers engaged in hoisting and moving loads, in order to ensure safety of workers and materials. i. Tests rigging to ensure safety and reliability. j. Tilts, dips, and turns suspended loads to maneuver over, under, and/or around obstacles, using multi-point suspension techniques. k. Installs ground rigging for yarding lines, attaching chokers to logs and then to the lines. 2. Assumes responsibility of organizing, planning and prioritizing rigging work a. Familiar with supervisory personnel, job activity to be performed, hazard communication program, safety rules and regulations, and emergency action procedures. b. Maintains contact with supervisor to receive instructions. c. Aligns, levels, and anchors machinery; Attaches loads to rigging to provide support or prepare them for moving, using hand and power tools. Attaches pulleys and blocks to fixed overhead structures such as beams, ceilings, and gin pole booms, using bolts and clamps. d. Controls movement of heavy equipment through narrow openings or confined spaces, using chain falls, gin poles, gallows frames, and other equipment. e. Dismantles and stores rigging equipment after use. f. Fabricates and sets up repair rigging, supporting structures, hoists, and pulling gear, using hand and power tools. Manipulates rigging lines, hoists, and pulling gear to move or support materials such as heavy equipment, ships, or theatrical sets. g. Selects gear such as cables, pulleys, and winches, according to load weights and sizes, facilities, and work schedules. Supervisory Responsibilities This job has no supervisory responsibilities. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience Preferred one to two years related experience and/or training. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Mathematical Skills Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using units of American money and weight measurement, volume, and distance. Reasoning Ability A bility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Certificates, Licenses, Registrations Valid driver's license. Must meet all CSE MVR criteria. Other Qualifications Must be able to travel. Must be able to pass a pre-employment drug screen. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee must regularly lift and /or move up to 50 pounds, frequently lift and/or move up to 100 pounds and occasionally lift and/or move more than 100 pounds. Work Environment The work nvironment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles and outside weather conditions. The employee is occasionally exposed to vibration. The noise level in the work environment is usually loud. CSE offers competitive wages, vacation/personal time, medical, dental, vision, and other competitive benefits, including a 401k plan. INTENT AND FUNCTION OF JOB DESCRIPTIONS Job descriptions assist organizations in ensuring that the hiring process is fairly administered and that qualified employees are selected. They are also essential to an effective appraisal system and related promotion, transfer, layoff, and termination decisions. Well-constructed job descriptions are an integral part of any effective compensation system. All descriptions have been reviewed to ensure that only essential functions and basic duties have been included. Peripheral tasks, only incidentally related to each position, have been excluded. Requirements, skills, and abilities included have been determined to be the minimal standards required to successfully perform the positions. In no instance, however, should the duties, responsibilities, and requirements delineated be interpreted as all inclusive. Additional functions and requirements may be assigned by supervisors as deemed appropriate. In accordance with the Americans with Disabilities Act, it is possible that requirements may be modified to reasonably accommodate disabled individuals. However, no accommodations will be made which may pose serious health or safety risks to the employee or others or which impose undue hardships on the organization. Job descriptions are not intended as and do not create employment contracts. The organization maintains its status as an at-will employer. Employees can be terminated for any reason not prohibited by law. Rigger (Full Time) Location: Madison Heights Department: Crane Summary Assembles rigging to lift and move equipment or material in manufacturing plant, shipyard, or on construction project by performing the following duties. Essential Duties and Responsibilities include the following. Other duties may be assigned. 1. Has practical knowledge of Regulatory Compliance with local, state, and federal Occupational Safety and Health Administration (OSHA) and Department of Transportation (DOT) rules and regulations, CSE, Inc. Rules and Regulations and Site-Specific Rules and Regulations. a. Works within AISC Certification Procedures. b. Familiar with and enforces strict compliance with all QA/QC and Safety procedures. c. Trained to safely operate forklifts, JLG type man-lifts, scissor-lifts and similar equipment. d. Controls movement of heavy equipment through narrow openings or confined spaces, using chain falls, gin poles, gallows frames, and other equipment. e. Dismantles and stores rigging equipment after use. f. Fabricates and sets up repair rigging, supporting structures, hoists, and pulling gear, using hand and power tools. Manipulates rigging lines, hoists, and pulling gear to move or support materials such as heavy equipment, ships, or theatrical sets. g. Selects gear such as cables, pulleys, and winches, according to load weights and sizes, facilities, and work schedules. h. Signals or verbally direct workers engaged in hoisting and moving loads, in order to ensure safety of workers and materials. i. Tests rigging to ensure safety and reliability. j. Tilts, dips, and turns suspended loads to maneuver over, under, and/or around obstacles, using multi-point suspension techniques. k. Installs ground rigging for yarding lines, attaching chokers to logs and then to the lines. 2. Assumes responsibility of organizing, planning and prioritizing rigging work a. Familiar with supervisory personnel, job activity to be performed, hazard communication program, safety rules and regulations, and emergency action procedures. b. Maintains contact with supervisor to receive instructions. c. Aligns, levels, and anchors machinery; Attaches loads to rigging to provide support or prepare them for moving, using hand and power tools. Attaches pulleys and blocks to fixed overhead structures such as beams, ceilings, and gin pole booms, using bolts and clamps. d. Controls movement of heavy equipment through narrow openings or confined spaces, using chain falls, gin poles, gallows frames, and other equipment. e. Dismantles and stores rigging equipment after use. f. Fabricates and sets up repair rigging, supporting structures, hoists, and pulling gear, using hand and power tools. Manipulates rigging lines, hoists, and pulling gear to move or support materials such as heavy equipment, ships, or theatrical sets. g. Selects gear such as cables, pulleys, and winches, according to load weights and sizes, facilities, and work schedules. Supervisory Responsibilities This job has no supervisory responsibilities. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience Preferred one to two years related experience and/or training. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Mathematical Skills Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using units of American money and weight measurement, volume, and distance. Reasoning Ability A bility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Certificates, Licenses, Registrations Valid driver's license. Must meet all CSE MVR criteria. Other Qualifications Must be able to travel. Must be able to pass a pre-employment drug screen. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee must regularly lift and /or move up to 50 pounds, frequently lift and/or move up to 100 pounds and occasionally lift and/or move more than 100 pounds. Work Environment The work nvironment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles and outside weather conditions. The employee is occasionally exposed to vibration. The noise level in the work environment is usually loud. CSE offers competitive wages, vacation/personal time, medical, dental, vision, and other competitive benefits, including a 401k plan. INTENT AND FUNCTION OF JOB DESCRIPTIONS Job descriptions assist organizations in ensuring that the hiring process is fairly administered and that qualified employees are selected. They are also essential to an effective appraisal system and related promotion, transfer, layoff, and termination decisions. Well-constructed job descriptions are an integral part of any effective compensation system. All descriptions have been reviewed to ensure that only essential functions and basic duties have been included. Peripheral tasks, only incidentally related to each position, have been excluded. Requirements, skills, and abilities included have been determined to be the minimal standards required to successfully perform the positions. In no instance, however, should the duties, responsibilities, and requirements delineated be interpreted as all inclusive. Additional functions and requirements may be assigned by supervisors as deemed appropriate. In accordance with the Americans with Disabilities Act, it is possible that requirements may be modified to reasonably accommodate disabled individuals. However, no accommodations will be made which may pose serious health or safety risks to the employee or others or which impose undue hardships on the organization. Job descriptions are not intended as and do not create employment contracts. The organization maintains its status as an at-will employer. Employees can be terminated for any reason not prohibited by law. #J-18808-Ljbffr Commercial Steel Erection, Inc.