AIRCRAFT MECHANIC

Summary

This is an Air Reserve Technician (ART) position. ARTs are part of the regular career civil service and enjoy all the benefits granted to Federal employees in the competitive civil service. In addition, ARTs are required to maintain their active membership in the AF Reserve unit where assigned. ARTs receive on average one weekend of military training per month.

Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information.

Learn more about this agency

Duties

Help

The primary purpose of this position is: to serve as an Air Reserve Technician (ART) performing such duties as removing, installing, adjusting, aligning, inspecting, troubleshooting, and performing final functional and operational tests on a variety of major aircraft systems, their assemblies, and components such as airframe, landing gear, power plant, gear boxes, pumps, and hydraulic, pressurization, utility, fuel, oil, pneumatic, and flight control systems and to provide training to reservists in the accomplishment of tasks set forth herein.

DUTIES:

1. Performs inspection and troubleshooting on a variety of aircraft systems, their assemblies, and components in accordance with applicable technical orders/commercial manuals (C40 only) and specifications.

2. Positions, maintains, disassembles, repairs, and reassembles aircraft systems, their assemblies, and components in accordance with applicable technical orders and specifications.

3. Accomplishes aircraft maintenance and equipment record keeping, both manual and automated, associated with aircraft maintenance and repair.

4. Utilizes safety practices and procedures following established safety rules and regulations, and maintains a safe and clean work area.

5. Verifies and certifies work processes and procedures and adequacy of work accomplished by certified co-workers and trainees

Requirements

Help

Conditions of employment

• U.S. Citizenship Required
• Males must be registered for Selective Service, see
• If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at:
• This posn is subject to provisions of the DoD Priority Placement Program
• Employee must maintain current certifications
• Disclosure of Political Appointments
• Must be a current member of the AF Reserve or willing/qualified to join
• Recruitment Incentive may be authorized for this position
• Relocation Incentive may be authorized for this position
• Direct Deposit: All federal employees are required to have direct deposit.
• The incumbent must obtain and retain the appropriate security clearance level designated for the position: Secret Security Clearance
• This is a drug testing designated position. The incumbent is subject to random testing for drug use. This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program.
• The incumbent may be required to fly in military and/or commercial aircraft to perform temporary duty assignments (TDY) away from the normal duty station.
• The incumbent may be required to work overtime to meet workload demands. Performs uncommon tours of duty.
• The work may require the employee to drive a motor vehicle. An appropriate, valid driver's license may be required.
• AFSC: 2A5X1/TSGT
• Depending on the type of position (competitive/excepted) you are selected for, you will be required to serve a 1-year probationary period OR 2-year trial period.
• Upon completion of your probationary/trial period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.

Qualifications

This is an Air Reserve Technician (ART) enlisted position. The incumbent is required to meet and maintain Air Force Reserve requirements. Work schedule will be aligned to allow the incumbent to fully participate in unit training assemblies. The incumbent's regular assignments are primarily ART duties; however, the incumbent may also be assigned non-ART duties, generally not to exceed 30 percent of total responsibilities.

Performs other related duties as assigned.

In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C for WG-8800 Aircraft Overhaul Family.

QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-8800 Aircraft Overhaul Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.

The screen out element for this position is the ability to perform the duties of a AIRCRAFT MECHANIC without more than normal supervision.

JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:

1. Knowledge of the make-up, operation, installation, and adjustment of a variety of interrelated and/or integrated aircraft systems, subsystems, and assemblies including, but not limited to: fuel and hydraulic systems, flight control systems, instrumentation systems, engines, landing gear assemblies, airframe, and control surfaces.

2. Knowledge of a wide variety of parts, components, subsystems, and assemblies such as ejection seats, nuclear shielding, or similar self-contained systems.

3. Knowledge of safety regulations, practices, and procedures.

4. Knowledge of supply procedures, applicable publications, tools, equipment and material accounting, security, and documentation procedures.

5. Skill in the use of standard and specialized tools and test equipment including fixtures, templates, scales, test stands, and external power sources.

6. Skill in reading and understanding instructions, schematics and diagrams, specifications, blueprints, technical orders, data, and settings from aircraft instruments and gauges.

7. Ability to rig, operationally test, and/or troubleshoot systems; determine when they are operating properly or whether portions of the system should be repaired or replaced; and the type and extent of adjustment and alignment needed.

Functional Requirements:

Heavylifting (80 lbs and over). Heavy carrying (45 lbs and over). Reaching above the shoulder. Use of fingers. Both hands required. Hours of walking are approximately 4 hours/week. Climbing, use of legs and arms. Both legs required. Operation of special purpose and or motor vehicles. Near vision correctable at 13 inches to 16 inches to Jaeger 1 to 4. Far vision correctable in one eye to 20/20 and 20/40 in the other. Depth perception. Ability to distinguish basic colors. Ability to distinguish shades of color. Hearing (with or without aid permitted). If it can be otherwise accommodated, a specific physical condition or impairment will not automatically disqualify a candidate.

Environmental Factors:

Work is performed in hangar areas, outdoors, in aircraft, and sometimes in hazardous noise areas. Exposed to extremes in heat, cold, humidity, and inclement weather. Must work in confined areas and in awkward positions. Exposed to bodily fluids, dirt, grease, and aircraft fluids (oil, hydraulic, fuel, sealants, solvents, and hazardous fluids, and gases) Potentially exposed to Hydrazine, Halon, and/or composites and Low Observable (LO). Subject to cuts, bruises, muscle strain, and injury from falls off scaffolds, ladders, and aircraft surfaces. Slippery or uneven walking surfaces. Working around machinery with moving parts. Working around moving objects or vehicles. May be exposed to intake suction and hot exhaust blast. Working closely with others. Working alone.

PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Additional information

Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here. To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.

Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information.

Current Federal Civilian employees may apply for temporary and term positions and if selected, a break in service may be required prior to appointment to the position.

120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.

Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click here to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.

Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click here to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.

Incentives : Recruitment and/or retention incentives may or may not be used.

Disabled veteran leave is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click here.

If you have questions regarding this announcement and have hearing or speech difficulties click here.

Tax Law Impact for PCS: On 22-Dec-2017, Public Law 115-97 - the "Tax Cuts and Jobs Act of 2017" suspended qualified moving expense deductions along with the exclusion for employer reimbursements and payments of moving expenses effective 01-Jan-2018 for tax years 2018 through 2025. When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit GSA Bulletin FTR 20-04 here for additional information.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

Help

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.