Microelectronics & Mixed-Signal Integrated Circuit Designer
Oak Ridge National Laboratory
Requisition Id 16571
Overview:
- Design and develop mixed-signal integrated circuits and microelectronics subsystems supporting DOE, DOD, and industry mission needs, including analog, digital, RF and/or mixed signal integration.
- Perform circuit- and block-level simulation and analysis (e.g., noise, linearity, dynamic range, stability, timing/jitter, signal integrity, and power integrity).
- Use industry-standard EDA tools for schematic capture, simulation, and layout/verification (Cadence design environment desired), including support for layout-aware analysis (e.g., parasitics) and signoff checks (DRC/LVS as applicable).
- Support RF/microwave design and co-simulation using ADS (Keysight) or equivalent tools, as appropriate to project requirements.
- Contribute to microelectronics system design and integration, including embedded sensors, embedded processors, and power management; may include board-level design, bring-up, and debug.
- Participate in FPGA-based design and prototyping when needed to enable rapid demonstration and evaluation of mixed-signal or heterogeneous systems.
- Prototype and evaluate solutions using both custom microelectronics and COTS components; maintain flexibility to contribute across different circuit types as program needs and funding priorities evolve.
- Work with multidisciplinary teams across ORNL to translate requirements into robust hardware solutions.
- Prepare and present research and development results in conferences, peer-reviewed journals, and project reviews, as appropriate to the role and project expectations.
- Contribute to technical proposals, white papers, and statements of work for new collaborations and funding opportunities.
- Deliver ORNL's mission by aligning behaviors, priorities, and interactions with our core values of Impact, Integrity, Teamwork, Safety, and Service. Promote equal opportunity by fostering a respectful workplace - in how we treat one another, work together, and measure success.
- A BS in Electrical Engineering or a related field.
- Experience in mixed-signal IC design, including RF and/or digital circuit blocks and subsystem integration.
- Experience with microelectronics design tools and workflows; familiarity with the Cadence suite is highly desired.
- Familiarity with RF/microwave simulation tools such as ADS (Keysight) or equivalent is desired.
- Experience with hardware prototyping, test, debug, and documentation (IC-level and/or board-level).
- Ability to work effectively in a collaborative, multidisciplinary R&D environment and communicate technical results clearly.
- Demonstrated capabilities in technical writing and preparing engineering design documentation.
- Publication of research results in peer-reviewed journals and conferences.
- Strong collaboration skills and ability to work with hardware/software teams and end users.
- Excellent verbal and written communication skills.
- Visa sponsorship is not available for this position
- This position requires the ability to obtain and maintain a clearance from the Department of Energy. As such, this position is a Workplace Substance Abuse (WSAP) testing designated position. WSAP positions require passing a pre-placement drug test and participation in an ongoing random drug testing program.
- Login to your account via jobs.ornl.gov
- View Profile
- Under the My Documents section, select Add a Document
Vacancy posted 4 hours ago
Similar jobs that could be interesting for youBased on the Microelectronics & Mixed-Signal Integrated Circuit Designer in Oak Ridge, TN vacancy
- ...client's advanced centrifuge technologies, crafting clever circuits, integrating sensors, and designing data-acquisition and control solutions that keep... ...instrumentation electronics, write LabVIEW-based tools that turn signals into insight, and help bridge R&D to production with...SuggestedTemporary work
- ...our advanced centrifuge technologies-crafting clever circuits, integrating sensors, and designing data-acquisition and control solutions that keep America... ...electronics, write LabVIEW-based tools that turn signals into insight, and help bridge R&D to production with designs...SuggestedFull time
- ...solutions. As a Sr. Electronics Engineer, you’ll dive into advanced instrumentation, motor controls, and power electronics to help us design, deploy, and optimize critical systems for our manufacturing and enrichment facilities. If you love tinkering with everything from...SuggestedFull timeShift work
- ...support our clients in Oak Ridge, TN. If you get excited about designing advanced electronics for motor controls, instrumentation, and electric... ...solutions. You will work on everything from power electronics circuit design to embedded systems, blending creativity with precision...SuggestedTemporary work
- ...a high-tech, mission-driven environment. You'll support the design, development, testing, and deployment of control electronics, working... ...and efficiency—gaining exposure to everything from low-voltage circuits to complex industrial power systems. What You Will Do...SuggestedInternship
- ...Power Electronics Engineer with 5–10 years of experience to design, develop, and optimize power conversion and power management... ...optimization, with strong supporting expertise in PCB design and circuit integration. The ideal candidate will have deep technical knowledge in...
- ...control electronics, and electrical hardware design. This role ensures safe, reliable, and... ...facility while supporting new equipment integration, upgrades, and troubleshooting. What... ...~ Knowledge of analog and digital circuit design, PCB layout, and simulation tools...Full timeFor contractors
- ...full engineering lifecycle—from problem identification through design, implementation, testing, and commissioning—while promoting data... ...client engagement. Major Responsibilities Engineer, integrate, program, and commission PLC, DCS, and HMI‑based control systems...Contract workTemporary workFor contractorsLocal area
- ...Candidate will be responsible for developing high quality detailed design packages, providing engineering procurement and field technical... ...must effectively and cooperatively work as a team member of an integrated project team. Design engineer will routinely perform walkdowns...Full timeFor contractorsRemote work
- ...TN. Summary The I&C Engineer will be responsible for supporting the instrumentation and controls (I&C) through detailed design, build and testing of the I&C according to the design requirements. Responsibilities I&C design for process systems (controls...Temporary work
- ...workflows, reduce rework, and deliver cost-effective, compliant designs. This role blends hands-on engineering (design, fabrication,... ...Responsibilities Digital Systems & Controls Engineering Engineer and integrate PLC, DCS, HMI, network switches, and control systems; lead...
- ...The selected candidate will support the design, development, testing, and implementation... ...(e.g., load flow, voltage drop, short circuit, arc flash), cable schedules and material... ...controls, embedded systems, and system integration. Strong communication, technical writing...Temporary workWork at office
- ...workflows, reduce rework, and deliver cost-effective, compliant designs. This role blends hands-on engineering (design, fabrication,... ...configuration management. Key Responsibilities: Engineer and integrate PLC, DCS, HMI, network switches, and control systems; lead...For contractors
- ...WHAT YOU'LL DO This engineering position will include the following key responsibilities: Develop control system design documents and drawings under minimal supervision of senior engineers. Being primary interface with project management and other...Work at office
$127k - $133k
...District/Group: Kiewit Nuclear Solutions Department: Design Engineering Market: Nuclear Employment Type:... ..., and infrastructure markets. As part of Kiewit, we are integrated with 135 years of construction and engineering excellence that...Permanent employmentFull timeWeekend work- ...in rotordynamics and dynamic testing, coupled with expertise in signal processing and software development. The ideal candidate will adeptly... ...while driving new methodologies for enhanced centrifuge design and production. Key Responsibilities: • Serve as the resident...
- ...knowledgeable in subject areas such as rotordynamics, dynamic testing, signal processing, and software development. What You'll Do:... ...Dynamic testing including experimental modal analysis (EMA) Test design and automation Model verification and validation...Contract workTemporary workFor contractors
- ...The Enrichment Systems Engineering Section is seeking a Machine Design Engineering Group Leader who will support the Enrichment... ...challenges arise. Ensure cross-functional teaming and group integration with upstream analysis and downstream manufacturing/procurement...Work at officeRelocation packageFlexible hours
- ...Network Design/I&C Engineer MS Technology, Inc. is seeking a Network Design/I&C Engineer to support our clients in Oak Ridge, TN... ...Oak Ridge, Tennessee. This role supports the development and integration of industrial control systems, instrumentation, and network architecture...Temporary work
- ...Carbon Fiber Composites Design & Process Development Engineer Napakiak Environmental and Construction (NEC) is a leading provider of information technology, technology development, and environmental and construction services, specializing in Federal and Commercial...
$118.02k - $180.31k
...level, complex programs for nuclear power projects associated with design, operational excellence, safety, maintenance, and project... ...environment for non-commercial, heavy industrial plants, with a focus on integrated, detailed system design for new plants, or modifications or...Hourly payFull timeContract workLocal areaWorldwideFlexible hours$175k - $190k
...Ridge office, you will perform a variety of electrical engineering design and construction support functions. This includes survey/assess... ...engineering activities ~ Citizen of United States ~ Short Circuit Analysis experience ~ Very knowledgeable in the NEC ~...Hourly payContract workCasual workWork at officeLocal areaRemote workLong distance- ...supporting safety analyses, and ensuring alignment between engineering design and regulatory requirements. This is a technically focused... ...strategies and documentation packages Engineering Integration ~ Work closely with engineering teams to understand...Permanent employmentImmediate start
- ...BGS is looking for an Industrial Microwave Engineer for our Oak Ridge, TN office. The ideal candidate will be responsible for designing, developing, and optimizing microwave systems and components used in industrial production processes. This engineer will work in a...Full timeTemporary workWork at officeMonday to Friday
- Advanced Automation Corporation (AAC) is looking for a Systems Engineer to join an already high-performing team. The candidate is expected to be familiar with the System Engineering Life Cycle, with significant expertise in requirements management. The primary role will...Full timeContract workWork experience placementRemote workWork from homeFlexible hours
- ...requirements tracking database to be used to track requirements through, design, construction, verification, and closeout. ~ Maintain and... ...the quality of the System Requirements Baseline. ~ Integrate system interface requirements and ensure consistency of interface...For subcontractorRemote work2 days per week3 days per week
- ...Navarro Research and Engineering is recruiting an Electrical Engineering Designer in Oak Ridge, TN. An active DOE Q clearance is required to be considered for this position. Navarro Research & Engineering is an award-winning federal contractor dedicated to partnering...Temporary workFor contractors
- ...organizations, management, and hourly wage employees. Must be willing to work in a production environment. Experience in Integrated Safety Management is a plus. Qualifications Requires an ABET accredited BS degree in an Engineering discipline plus 15 or...Hourly payFor contractorsRemote work
- ...Candidate will be responsible for developing high quality detailed design packages, providing engineering procurement and field technical... ...must effectively and cooperatively work as a team member of an integrated project team. Design engineer will routinely perform walkdowns...Full timeContract workWork at office
- ...requirements across facility and equipment systems. This role works closely with design, operations, safety, and quality teams to ensure requirements are complete, traceable, and effectively integrated throughout the project lifecycle. Responsibilities Develop and...Temporary work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Microelectronics & Mixed-Signal Integrated Circuit Designer. Be the first to apply!


