MECHANICAL ENGINEER Jobs

Principal Port EngineerDutiesYou will serve as a principal port engineer for assigned ocean-going vessels, including those powered by steam and/or diesel and/or gas turbine.You will determine, plan, and schedule all technical work requirements for all availabilities for assigned ships.You will use standardized procedures to estimate all maintenance and repair industrial assistance work packages and establish funding against these work requirements using the MSC financial management system.You will serve as the point of contact for technical issues related to shipboard readiness and maintenance and repair.You will plan and execute policy and procedures for designing, building, maintaining, repairing, and overhauling MSC's worldwide fleet of ships.You will provide the technical interface with internal and external parties on ships' design and engineering operations.You will provide cross program technical support for MSC ship life cycle management, construction, conversion, and replacement efforts during design, construction, and subsequent operation.You will plan for and manage the development of contract guidance plans and specifications.You will oversee the safety environmental and damage control programs and plan for preventative and predictive maintenance.You will plan and perform shipboard tests and inspections for MSC ships and provide technical assistance on complex engineering problems and their solutions.Requirements Conditions of employmentMust be a US Citizen.Must be determined suitable for federal employment.Must participate in the direct deposit pay program.New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.govWithin the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.Males born after 12-31-59 must be registered for Selective Service.You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.You will be required to obtain and maintain a U.S. Passport.You will be required to successfully complete a pre-appointment physical examination.QualificationsGS-12: In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following:Experience working with marine propulsion systems including gas turbines systems, steam turbine systems, medium speed diesel systems, slow speed diesel systems, and diesel electric systems.Experience managing ship life cycle plans by planning, directing and coordinating the maintenance and repair activities requiring industrial assistance for assigned ships.Experience prioritizing shipboard work requirements against life cycle plans, budgetary requirements and limitations.Experience coordinating development of test programs for overhauled equipment or for new installations of all types of shipboard equipment and systems including main machinery and boilers.GS-11: In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-09 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following:Experience working with shipboard main and auxiliary systems including main propulsion systems, electrical distribution systems, heating ventilation and air conditioning systems, refrigeration systems, firefighting systems, cargo systems, fuel systems, lubricating systems, communicating systems, seawater systems, auxiliary boiler systems, and all varieties of piping systems.Experience developing and reviewing plans, work items and cost estimates for maintenance and repair and ship alteration work for assigned ships.Experience conducting ship checks to verify the work items technical requirements and regularly work with the ships force to troubleshoot systems and technically analyze the cause of casualties.Experience supporting field inspections of shipyards to determine maintenance capabilities in advance of ship maintenance contract awards.Additional qualification information can be found from the following Office of Personnel Management website: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: All Professional Engineering Positions, 0800 Basic Requirements:A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.OR- B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.The adequacy of such background must be demonstrated by one of the following:Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)***A transcript must be submitted with your application if qualifying using education. See Required Documents for additional information.*** ****************************************************************************************************************************************************** In lieu of specialized experience, you may qualify with the following education or combination of both education and experience for the GS-11 position:Successful completion of three full years of progressively higher-level graduate education leading to a Ph.D. degree -OR-Successful completion of Ph.D. or