Robotic Integration Engineer (Robotic Welding & Automation)
Full Circle Recruiting
Job Description
Job Description
Job Summary
We are seeking a highly skilled Robotic Integration Engineer (Robotic Welding & Automation) responsible for programming, operating, and maintaining robotic welding systems and automation lines. The candidate will work with ABB robots, integrate robotic systems with production lines, and ensure optimal performance, quality, and safety standards.
Key Responsibilities
Robotic Welding Operations
- Program, operate, and troubleshoot ABB industrial robots for robotic welding applications.
- Develop and modify robot programs for MIG/TIG/Spot welding processes.
- Set up welding parameters including voltage, current, wire feed speed, travel speed, and gas flow.
- Perform robot path teaching, calibration, and optimization.
- Ensure weld quality meets engineering and customer specifications.
- Conduct trial runs and fine-tune programs for cycle time improvement.
Automation Line Integration
- Integrate robotic systems with automated production lines.
- Configure PLC, HMI, sensors, safety interlocks, and peripheral equipment.
- Coordinate with automation teams for line balancing and system synchronization.
- Support commissioning of new automation lines.
- Diagnose and resolve mechanical, electrical, and programming issues.
- Monitor system performance and reduce downtime.
Programming & Technical Expertise
- Create and modify robotic programs using ABB robot programming software (e.g., RobotStudio).
- Interpret electrical schematics, P&ID diagrams, and automation layouts.
- Perform I/O configuration and field device integration.
- Optimize cycle times and improve overall equipment effectiveness (OEE).
Maintenance & Troubleshooting
- Conduct preventive and predictive maintenance on robotic systems.
- Troubleshoot servo motors, drives, welding power sources, and control systems.
- Maintain backup programs and system documentation.
- Maintain TPM check sheets and maintenance logs.
Quality & Compliance
- Ensure weld quality through inspections and adherence to WPS standards.
- Maintain documentation including program revisions and process parameters.
- Identify root causes of defects and implement corrective actions.
- Follow safety standards for robotic cells and automation lines.
Safety & Standards
- Ensure proper functioning of safety systems such as light curtains, interlocks, and emergency stops.
- Comply with company safety policies and industrial automation standards.
- Maintain a clean and organized robotic cell environment (5S).
Required Qualifications
- Bachelor’s Degree / Diploma in Mechanical, Electrical, Mechatronics, or Automation Engineering.
- Proven experience in robotic welding and automation integration.
- Hands-on experience with ABB robots and robotic welding systems.
- Strong knowledge of PLC systems and industrial automation.
- Ability to read technical drawings, electrical schematics, and welding symbols.
- Good troubleshooting and problem-solving skills.
Preferred Skills
- Experience in automotive or heavy fabrication industries.
- Knowledge of MIG, TIG, and Spot-welding processes.
- Experience in automation line commissioning.
- Understanding of Industry 4.0 concepts and smart manufacturing.
Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the Robotic Integration Engineer (Robotic Welding & Automation) in Conroe, TX vacancy
- ...Description Job Description Controls Engineer – Automation & Robotics SpecialistJob Title: Production... ...Robotics Specialist to design, program, integrate, troubleshoot, and continuously... ...robotic systems, including robotic welding, material handling, machine tending,...SuggestedFull time
- ...of a kind, patented celluveyor technology, offers powerful automation solutions for material flow systems in intralogistics and distribution... .... We are seeking a dynamic hands-on Field Service & Integration Engineer to join our U.S. team. This role bridges the gap between...SuggestedTemporary workWork at officeLocal areaRemote workFlexible hours
CELLUMATION INC
The Woodlands, TX23 days ago - ...looking for a Production Planner & Process Automation Specialist who will fundamentally... ...apply AI, automation, and modern system integration tools to a hands-on production environment... ...process; shadow production, quoting, engineering and purchasing to map cross-departmental...Suggested
Ameritex Machine & Fab, LLC
Conroe, TX4 days ago - Mechanical Design Engineer - Sheet Metal Enclosures Ameritex Machine & Fabrication is a fast-growing metal fabrication company specializing... ...fabrication drawings, BOMs, hardware callouts, bend notes, and weld details Enter BOMs, routings, part data, and revisions into the...SuggestedFull timeImmediate start
- ...Electrical & Mechanical Maintenance Engineer responsible for preventive and breakdown... ..., Press Forming Machines, and Robotic Welding & Automation Lines. The candidate will focus on maximizing... ...and teach pendants. Maintain PLC integration, I/O systems, sensors, and safety...Suggested
Full Circle Recruiting
Conroe, TX3 days ago - ...Cellipont Bioservices is growing, and we are looking for a Automation Engineer II who believes in the potential of bridging client's... ...projects for facility expansion, ensuring new equipment are integrated to automation infrastructure, administrating, troubleshooting...Work at officeFlexible hoursShift workNight shift
Cellipont Bioservices
The Woodlands, TX2 days ago - ...utilize expertise in data mining, data integration, data analysis, and data visualization... ...leverage artificial intelligence and workflow automation technologies to improve the speed,... ...analysis.Collaborate with data engineering and information technology teams to improve...For contractorsWorldwide
- ...Control Systems / Automation EngineerTIGA is seeking an experienced Control Systems / Automation Engineer to provide remote PLC programming and controls support for one of our oil and gas clients. This fulltime role involves supporting field assets by remotely connecting...Full timeWork at officeLocal areaRemote work
LS Technologies, LLC
Shenandoah, TX2 days ago - ...Controls And Automation EngineerBeusa The Woodlands Corporate Office - The Woodlands, TX 7... ...POSITION SUMMARY: The Controls and Automation Engineer is responsible for project execution,... ...and controls solutions that can integrate, where appropriate, to the existing controls...Full timeWork at officeHome officeMonday to FridayShift workWeekend workAfternoon shiftEarly shift
EVOLUTION WELL SERVICES OPERATING L
Shenandoah, TX2 days ago $75k - $100k
...- $100,000.00/yr Position Summary We are seeking a Mechanical Engineer with strong sheet‑metal design experience to own the full engineering... ...CADMAN Suite and Artube Produce clear fabrication drawings, weld details, hardware callouts, and bend notes ERP Data Ownership...Full timeImmediate start- Panelmatic in Conroe, Texas, is seeking an experienced Mechanical Engineer to create and review models for power distribution equipment like Metal-Clad Switchgear and Panelboards. The ideal candidate should have a BS in Mechanical Engineering and 1-3 years of relevant...
- ...Job Description Position Summary The Welding Engineer is the technical authority for all... ...equipment, filler metals, shielding gases, and automation opportunities. Lead root cause... ...practical. Identify opportunities for robotic welding, mechanization, and fixture...Permanent employmentWork at office
- ...EngineerHuntsman is seeking a Senior Corporate Process Safety Engineer supporting the Corporate EHS Division located in The Woodlands... ...Analyses (PHA), Layers of Protection Analysis (LOPA), and Safety Integrity Level (SIL) assessments.Lead and participate in process safety...Full timeWork at office
- ...feels appreciated for their hard work. Collaboration, respect, integrity and accountability are core concepts for our success. PRIMARY... ...EngineeringKnowledge of Lean Manufacturing3-8 years of Industrial Engineering ExperienceAny shop or hands on experience requiredWhy Would I...Shift work
- ...to the concept development, design, and improvement of Solids Control and Waste Management equipment and systems.Apply Mechanical Engineering principles to support new product development and enhancement of existing product lines.Perform engineering analysis, including...
NOV
Conroe, TX2 days ago - ...Job TitleMechanical EngineerJob DescriptionResponsibilities:Work under general supervision of the Director of Engineering.Prepare specifications for purchased components and (sub) systems.Prepare design proposals for new equipment and modifications to current designs.Work...Full time
NOV
Conroe, TX2 days ago - ...handle the largest and most complex packages quickly and efficiently.Panelmatic is seeking a detail-oriented experienced Mechanical Engineer. The Mechanical Engineer will create/review models and BOM's for power distribution equipment including Metal-Clad Switchgear,...Worldwide
Panelmatic
Conroe, TX3 days ago - Western Midstream is seeking a leader to join the Remote Operations Center (ROC) in The Woodlands, TX, overseeing a team of Pipeline Controllers and coordinating with other departments on new customers, equipment, and procedures. The role requires strong midstream experience...Work at officeRemote work
Western Midstream
The Woodlands, TX22 hours ago - ...largest and most complex packages quickly and efficiently. Job Summary Panelmatic is seeking a detail-oriented experienced Mechanical Engineer. The Mechanical Engineer will create/review models and BOM?s for power distribution equipment including Metal-Clad Switchgear,...Worldwide
$75k - $100k
A leading metal fabrication firm in Conroe, Texas, is seeking a Mechanical Engineer with strong sheet-metal design experience to oversee the full engineering lifecycle. Responsibilities include creating 3D models, programming CNC machinery, and developing engineering standards...- NOV is seeking an Engineer in Conroe, Texas, to work under the general supervision of the Director of Engineering. The ideal candidate will have a Bachelor's of Science Degree in Mechanical Engineering and experience in oil and gas service equipment. The role involves...
- Industries: UTEX Industries is a leading manufacturer of engineered sealing solutions serving the oil and gas, industrial, and petrochemical... ...products, and our purpose. Join a team that values safety, integrity, and continuous improvement. Brief Description About UTEX...Work at officeLocal area
- ...This organization provides full lifecycle mechanical solutions including HVAC, plumbing, piping, controls/building automation, engineering services, and prefabrication support. Projects include healthcare, higher education, mission-critical facilities, manufacturing...Contract workFor contractorsFor subcontractor
gpac
Conroe, TX15 hours ago - ...realities of commercially available IT products and creating requirements that will allow implementation by the architecture and engineering team and COTS products. Must possess experience of system engineering in one or more areas including telecommunications concepts,...Full timeContract workLocal areaImmediate startRemote workWorldwideNight shift
- ...benefits package in the industry.Position Summary The Mechanical Engineer for Kodiak Power Solutions supports the design, installation,... ...selection, piping systems, layout development, and system integration.Contribute to project execution by participating in design reviews...Full timeFor contractorsWork at office
- ...continuous improvement initiatives using Lean methodologies. Coordinate strategic projects while collaborating with operations, engineering, finance, and leadership teams. Qualifications Bachelor's degree in Industrial Engineering, Business Administration, Operations Management...RelocationRelocation package
- UTEX Industries is seeking an experienced Process Engineer to support and improve manufacturing processes for small-series production of elastomer and plastic seals. You will work with production, quality, maintenance, and engineering teams to drive efficiency, reduce...
- ...improvement projects across departments. You will develop KPIs, dashboards, and performance metrics, monitor results, and collaborate with engineering, finance, and leadership to drive efficiency. Fluent English and Spanish preferred, on-site role with relocation support. #J-188...Relocation package
$120k - $160k
...issues, and supporting accounting/finance users in an ERP environmentStrong SQL and data analysis skills to support reporting, integrations, and operational decision-makingPreferably, you have a bachelor's degree in computer science, information systems, or a similar...Permanent employmentWork at officeImmediate startWork from home- ...degree requirements met before your first day.) Preferred Qualifications Working towards a degree in Health Science, Safety Engineering, Health & Safety, Safety Management, Business Administration, or related field Interest in or previous experience in safety...Full timeWork at officeRelocation packageFlexible hoursShift workNight shiftWeekend work
Amazon
The Woodlands, TX1 day ago
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Robotic Integration Engineer (Robotic Welding & Automation). Be the first to apply!
Related searches
- director of automation Conroe, TX
- automation project manager Conroe, TX
- automation operator Conroe, TX
- building automation manager Conroe, TX
- marketing automation consultant Conroe, TX
- automation Conroe, TX
- automation manager Conroe, TX
- automation consultant Conroe, TX
- marketing automation manager Conroe, TX
- aviation safety assistant office automation Conroe, TX