Instrumentation and Controls Technician
NRG Energy
As an NRG employee, we encourage you to take charge of your career and development journey. We invite you to explore exciting opportunities across our businesses. You’ll find that our dynamic work environment provides variety and challenge. Your growth is key to our ongoing success—take the lead in shaping your career development, goals and future!
Job Summary
The Master I&C Technician performs the operation and maintenance duties of the power plant and the supporting equipment and systems.
The Master I&C Technician operates from established and well-known procedures under minimum supervision performing duties independently with only general direction given. The Master I&C Technician encounters recurring work situations of moderate complexity, with occasional variations from the norm. Decisions are made within prescribed operating and casualty procedures and guidelines.
The Master I&C Technician must perform work in a safe manner resulting in no accidents, in compliance with all environmental permits at all times. The Master I&C Technician must effectively communicate information to supervision and fellow plant personnel, relative to the condition of the plant equipment and performance, and provide suggestions for plant improvements. The Master I&C Technician must perform duties in such a way to result in an optimum cost-benefit ratio.
All employees have the responsibility to both the customer and their co-workers to do the job right the first time and to ensure the customer's needs are being met.
Job Functions
Assist in start-up, shut-down and normal operations of power plant systems.
Operate major auxiliary apparatus such as: air compressors; gas compressors, chillers and cooling systems.
Perform operating tests and inspections, and makes repairs and adjustments to equipment assigned to achieve proper operating conditions.
Prepares and oversees LOTO packages
Perform routine water chemistry analysis and operate continuous Emissions Monitoring equipment.
Maintain logs as assigned.
Maintains all plant instrument, electrical and mechanical systems.
Report any abnormal or irregular conditions that develop during the progress of the work and takes corrective measures.
Complete other tasks as required by the Operations and Maintenance Manager.
Education and Experience –
Ability to understand procedures and instructions specific to the area of assignment as would be acquired in four years of high school.
Minimum of two years of experience in Power Plant Operations and Maintenance.
Experience in operation and maintenance of mechanical, electrical and instrument systems required.
Theoretical and practical knowledge of combustion/steam turbine operations, industrial safety, hazardous waste management and inspection/recording of plant parameters is highly desirable.
Experience with piping and instrument schematics and process controls desirable.
Extensive working knowledge of power plant industry desirable.
Must successfully complete a plant operator's knowledge examination.
Knowledge, Skills and Abilities -
Must possess basic math skills, good verbal communications skills, and be proficient with the use of power and precision tools.
Must be cooperative with those he/she contacts in this work and have the ability to work without direct supervision.
Must know the hazards involved and the safety precautions to be practiced in the operation and maintenance of power plant equipment and machinery.
Work within and insure strict adherence to all safety practices and procedures.
Must be able to respond to audio alarms and variations of sound.
Basic data entry/computer skills.
Work as a team. Must be able to pool our knowledge and energy to work in tandem to completely understand and productively respond to all of the business challenges.
Work Environment –
Protective equipment such as hard hats, safety glasses, air masks, ear protection, chemical suits, hot gloves, high voltage protective equipment and other equipment must be worn in the performance of some duties.
Work with hazardous materials may be required.
Requires working extended working hours, varied shifts or 12 hour shifts with weekend and holiday work as required by schedules, workload and plant conditions. On call status (day and night) may be required.
Includes working indoors and outdoors.
Will routinely work between two sites and may be asked to work at the third location
Physical Abilities –
Physical requirements include: possibility of working on feet for extensive periods, requiring stair and ladder climbing; and routinely lifting 50 pounds.
All employees will participate in the Fitness for Duty Program. This program includes a postoffer physical examination and drug screening and post-employment random drug screening. There are extensive smoking restrictions in and around the facility.
Must be able to work in elevated areas, confined spaces and in extreme heat and cold conditions.
This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees may be required to follow other job-related instructions and to perform other job-related duties as requested, subject to all applicable state and federal laws. Certain job functions described herein may be subject to possible modification in accordance with applicable state and federal laws.
NRG Energy is committed to a drug and alcohol-free workplace. To the extent permitted by law and any applicable collective bargaining agreement, employees are subject to periodic random drug testing, and post-accident and reasonable suspicion drug and alcohol testing. EOE AA M/F/Vet/Disability. Level, Title and/or Salary may be adjusted based on the applicant's experience or skills.
Official description on file with Talent.
We support the use of AI tools to help you prepare for your interview (e.g., practicing responses, researching the role, or refining your resume). However, during interviews and assessments, we expect responses to reflect your own thinking, experience, and communication. Use of AI to generate or read answers in real time, complete assessments, or misrepresent your qualifications is not permitted and may impact your candidacy.
- ...Electronics, Electrical & Computer Systems Technician (AE/AT) Category / Component:... ...radar, communications, navigation, flight controls, and weapons at sea and ashore. Qualified... ...systems; test and calibrate aircraft instruments and automatic flight controls; perform...SuggestedTemporary workApprenticeshipWork at officeWorldwideNight shiftRotating shift
$41.61 per hour
...pay, outstanding benefits, a climate-controlled work environment, and NO mandatory overtime... ...Do: As a Controls and Electrical Technician, you'll play a key role in keeping... ...Familiarity with motors, PLCs, controls, instrumentation, servos, electrical distribution, VFDs...SuggestedExtra incomeLocal areaShift work3 days per week$31.94 per hour
...Maintenance Technician Come join our team as the Maintenance Technician! We started with pastries handmade by Lois and Lloyd... ...dimensional requirements. Adjusts functional parts of devices and control instruments. Repairs or replaces defective parts. Installs...SuggestedHourly payPart timeFlexible hoursWeekend workAfternoon shift2 days per week3 days per week$29.45 - $31.94 per hour
...Maintenance Technician Come join our team as the Maintenance Technician! We started with pastries handmade by Lois and Lloyd... ...dimensional requirements. Adjusts functional parts of devices and control instruments. Repairs or replaces defective parts. Installs...SuggestedWeekly payFlexible hoursShift workWeekend workDay shift$32.11 per hour
...the current SQF code, Good Manufacturing Practices (GMPs), and the Food Safety Modernization Act (FSMA) and associated preventive controls Other duties as assigned Education and Experience: ~ High School Diploma/GED or equivalent experience ~5-10 years of experience...SuggestedHourly payShift workNight shiftWeekend work$40.3 per hour
...tools, specialized equipment, hand tools, and precision measuring instruments to ensure the safe, reliable, and efficient operation of... ...as required to verify, adjust, replace or install DOT related controls, shutdowns, and relief valves. May direct other assigned employees...Full timeLocal areaRelocation package$75k - $100k
...Electronic Security Technician A growing security systems integrator is placing a dedicated Electronic Security Technician on-site... ...commissioning, preventative maintenance, and service work on Access Control and CCTV/IP Video systems. Full-time, Monday through Friday...Full timeMonday to Friday$21.52 - $24.5 per hour
...We are currently seeking a Junior Technician for our ATIP maintenance group which supports... ..., drive systems, inspection system instrumentation, electrical subsystems, and other railcar... ...experience with Programmable Logic Controllers (PLC) * Experience setting up and debugging...Full timeContract workLocal areaWorldwideShift work- ...and evaluate equipment performance using appropriate testing instruments.Maintain tools and machinery in good condition and use equipment... ...(CMMS).Able to tolerate working environment with inside controlled temperatures of minus 45 (-45) degrees Fahrenheit (-43 degrees...Local areaFlexible hours
- ...Electronic Maintenance Technician AFO is looking for an Electronic Maintenance Technician to work in Chambersburg, PA. To join our... ...operations through accurately forecasting, managing, and aggressively controlling costs. As an AFO employee, you will be surrounded by a...For contractorsRemote work
- ...the client! As a Senior HVAC Commercial & Residential Service Technician you would be going into clients' homes and businesses to... ...and cooling systems, humidification and commercial associated controls. Must pass background check and drug screen and be capable...Temporary workLocal area
- ...Customer Service Technician Brightspeed is looking for a Customer Service Technician to join our team! As a Customer Service Technician... ...to dig up and bury cable, working in utility access holes or controlled environmental vaults (CEV), and locating buried telephone...Work experience placementRemote workShift workNight shift
$35 per hour
...Come join our team as an HVAC Technician III! We started with pastries handmade by Lois and Lloyd Martin inside of a garage and we have... ...equipment such as turbines, pipes, fans, valves, regulators, controls, etc. · Directs and coordinates plant workers engaged in routine...Hourly payWeekly payFull timeMonday to FridayFlexible hoursWeekend workDay shift- ...Maintenance Technician The Maintenance Technician plays a critical role in supporting plant operations by maintaining, troubleshooting... ..., schematics, and blueprints. ~ Familiarity with PLCs, control systems, and automated equipment. ~ Basic welding and fabrication...Monday to Friday
- ...Maintenance Technician (3rd Shift) Keystone Sheets, an affiliate of Schwarz Partners, and corrugated manufacturing industry leader currently... ...background (manufacturing preferred) in AC/DC motor control, troubleshooting, and electrical wiring codes. Must be well...Immediate startFlexible hoursNight shift
$17 - $17.5 per hour
..., and help shape the future of cannabis. Title: Production Technician Pay Rate: $ 17.00 to $ 17.50 per hour Location: Chambersburg... ...and decriminalized marijuana, it is still considered a controlled substance under federal regulations and thus illegal under...Hourly payPermanent employmentFull timeMonday to FridayShift work- Job Description Job Description Shatin Commercial Interiors is a restaurant seating maintenance company. Work hours include paid commute to restaurants in Mid-Atlantic Region. Work hours fluctuate but are typically between 2:00am - 3:00pm. This is a four day work week...Full time
$18 - $26 per hour
...Job Description Job Description Seeking Electronics Technicians & a Supervisor for a manufacturing company in Chambersburg, PA and Carlisle PA. Company is seeking candidates preferably with a 2-year degree in Electronics and a few years of manufacturing experience...Immediate start- ...Job Description The Automotive Service Technician services and repairs vehicles as assigned by management following all established standards and procedures. In addition, he or she may be assigned to conduct pre-delivery service on new vehicles to ensure excellent...Work experience placementLocal area
- Renn Kirby Auto is seeking a skilled and motivated Automotive Service Technician to join our growing service team. The ideal candidate is reliable, detail-oriented, and committed to providing high-quality repairs and maintenance while delivering excellent customer satisfaction...Full time
- Job Description Job Description Mavis Tires & Brakes at Discount Prices - Automotive MechanicsPut your career into high gear with Mavis Tires & Brakes at Discount Prices! We're looking for full-time Automotive Mechanics to join Team Mavis at one of our state-of-the...Weekly payFull timeImmediate start
- ...Job Title HVAC Technician Job Description HES is a premier national provider of facilities management services focused 100% on... ...and installations on all heating and ventilating equipment and controls as assigned. # Perform all scheduled preventative...Daily paidFull timeApprenticeshipImmediate startRelocation packageDay shift
- ...operator # Perform major and routine maintenance, service, repair and installations on all heating and ventilating equipment and controls as assigned. # Perform all scheduled preventative maintenance on all heating and ventilating equipment and controls systems as...ApprenticeshipImmediate startRelocation package
$33 - $37 per hour
...the current SQF code, Good Manufacturing Practices (GMPs), and the Food Safety Modernization Act (FSMA) and associated preventive controls Other duties as assigned; travel may be required Education and Experience: Associates Degree in Electronics, Electronic Technology...Hourly payFor contractorsShift workNight shiftWeekend work$26 per hour
...Our client, an electronics processing, reuse, and recycling company, is seeking a Hardware Technician to join their team. As a Hardware Technician, you will be part of the Reverse Logistics operations supporting the management and processing of used electronic equipment...Weekly payContract workTemporary workFlexible hoursShift workNight shift$30 - $40 per hour
...Product Service Technician Johnson Controls is a leading provider of advanced refrigeration solutions, specializing in transcritical CO? systems for data centers and other high-demand environments. Our commitment to innovation and sustainability drives us to deliver...Hourly payPermanent employmentRelocation- ...Job Description Job Description We are currently seeking a Maintenance Technician to join our team! You will be responsible for completing work orders and other required tasks. Responsibilities: Complete work and repair orders in a timely fashion Estimate...For contractors
- Job Description Job Description You’ll be out in the field diagnosing problems, repairing and maintaining residential HVAC systems in customers’ homes. This is a service-based role, not just installing new systems—you’ll need to think, communicate, and solve problems...Work at office
- ...Commercial Kitchen Service Technician (Hot Side) Position at K&D Factory Service Multiple Locations Across Pennsylvania Full-Time Experienced Technicians Wanted (2+ Years) K&D Factory Service has been servicing the Keystone State since 1945. K&D specializes in the...Hourly payFull time
- ...Automotive Technician Shively Motors is seeking a skilled Automotive Technician to join our team in Chambersburg, PA. The ideal candidate will be responsible for diagnosing, repairing, and maintaining a variety of vehicle makes and models, ensuring the highest standards...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Instrumentation and Controls Technician. Be the first to apply!




