CNC Programmer
Vitesse Systems
CNC Programmer Department: Machine Shop Reports To: Operations Manager Location: On-Site - Newark, CA Travel: Negligible FLSA: Salary, Full-Time, Exempt Revision Date: February 2026 About Vitesse: How we communicate, capture, and share information has not changed significantly in our lifetime-it has changed significantly in the last decade, even in the last year. From a vacationer checking email as they fly across the world to a U.S. military service member sharing critical observations across the battlefield, the ability to capture and transfer data over different platforms is an important part both of our everyday lives and the security of our country. Whether on a geostationary satellite, a naval vessel, or a military jet, the mission-critical solutions that we design and manufacture at Vitesse make our country and our world safer. Through extensive technical expertise, Vitesse Systems is optimizing the functionality of antenna and thermal management systems for the advancement of next-generation Radar, Electronic Warfare, and C4I (Command, Control, Communications, Computers, and Intelligence) systems. Vitesse Systems prides itself on the solutions we provide to our customers, as well as the incredible team of dedicated people we employ. SUMMARY: The CNC Programmer is responsible for the programming, setup and operation of 2, 3 and 4 axis CNC machines; as well as part inspection in a prototype and job shop environment. The programmer shall adhere to schedules; workflow from priorities set by production management. Commitment to and support of the Company Core Values are key to success in this position.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
MATHEMATICAL SKILLS: Ability to add and subtract two-digit numbers. Ability to multiply and divide with 10's and 100's.
REASONING ABILITY: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
CERTIFICATES, LICENSES, REGISTRATIONS: Authorization to work in the United States. To conform to U.S. export control regulations, you should be eligible for any required authorizations from the U.S. Government.
PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by a Team Member to successfully perform the essential functions of this job. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the Team Member is regularly required to stand, walk, and hear. The Team Member frequently is required to use hands and fingers; handle, feel, and reach with hands and arms. The Team Member is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl; and smell. The Team Member must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT: The work environments characteristics described here are representative of those a Team Member encounters while performing the essential functions of this job. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the Team Member is regularly exposed to moving mechanical parts. The Team Member may be exposed to a hot and/or cold work environment, chemicals, fumes or airborne particles, loud noises, risk of electrical shock and vibration and/or other occupational hazards; personal protective equipment may be required.
NOTE: This job description identifies the general nature and scope of work to be performed. Vitesse Systems, LLC. reserves the right to revise all or any part of this job description and to add or eliminate essential job functions at any time. Designation of any job duty as an essential function is not intended as an assurance or guarantee that a team member has any right to perform the particular job duty, except as required by Vitesse Systems, LLC. This job description is subject to change based on the needs of the position and/or the Company.
Vitesse Systems, LLC performs work controlled by the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). These statutes require the protection of technical data and products. The regulations require that such data not be disclosed in written, oral, or visual form to any foreign national without prior export authorization from the Department of State. A foreign national is defined by the U.S. Government under EAR 734.2(b)(2)(ii) and 8 USC 110 (a)(20) as one who:
Vitesse Systems, LLC is an Equal Employment Opportunity / Affirmative Action (EEO/AA) Veterans / Disabled Employer
ESSENTIAL DUTIES AND RESPONSIBILITIES:
- Utilize software applications such as MasterCAM and DNC systems to support programming and machining operations.
- Help plan, estimate, and report on machining projects.
- Evaluate tooling tailored to specific job requirements, factoring in material properties, geometric features, tolerances, equipment capabilities, and system rigidity.
- Independently set up, program, operate, and troubleshoot CNC Lathes and Mills.
- Determine starting stock requirements for costing and procurement, factoring in yield and scrap.
- Create setup sheets for part programs and discrete operations.
- Help provide process improvements to reduce setup and machining times.
- Inspect completed work for accuracy using tools like calipers, height gauges, and micrometers.
- Validate machining programs through simulations, dry runs, and prove-out processes.
- Monitor and maintain cycle times and ERP performance metrics.
- Track task completion times and labor distribution for financial reporting.
- Record job progress and quantities in ERP software.
- Ensure adherence to quality policies and procedures in all tasks.
- Oversee and ensure first pass yield on New Product Introduction (NPI) jobs meet established performance metrics.
- Provide guidance to engineering teams on selecting work holding solutions that support poka-yoke (error-proofing) processes and ensure operational efficiency.
- Other duties as assigned.
- This position has no direct supervisory responsibilities.
- To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. Successful accomplishment of duties and responsibilities may require the following:
- Excellent attention to detail.
- Prior experience with CNC Machining & Programming thereof.
- Prior experience programming MasterCAM software or comparable.
- Able to read & interpret blueprints and technical drawings including GD&T.
- Sufficient knowledge of the tools, equipment, materials, methods, and standard practices of the trade.
- Excellent communication skills, both written and oral.
- Must be adaptable to a changing work environment and competing demands.
- Ability to measure with CMM, vernier calipers, micrometers and height gauges.
- Must be capable of working with minimal supervision.
- High school diploma or general education degree (GED); or 1-year related experience; or equivalent combination of education and experience.
- While performing the duties of this job, the employee will be constantly required to execute standard physical activities within the facility areas (i.e. stand, walk, sit, use hands/fingers).
- While performing the duties of this job, the employee will be occasionally required to execute non-standard physical activities within the facility areas (i.e. climb or balance, stoop, kneel, crouch).
- Ability to lift and/or move up to 10 pounds frequently and occasionally lift and/or move up to 50 pounds.
- This position requires repetitive hand/wrist activities.
- Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
- While performing the duties of this position, the employee is regularly exposed to moving mechanical parts.
- Computer skills are sufficient to log in and out of ERP and Payroll time tracking software.
- Actively supports and complies with Vitesse Systems objectives, guidelines and commitment to Quality and Safety, with an emphasis on continual improvement, transparency, and collaboration.
- Must be able to interact effectively and cooperatively with employees at all levels.
- Must have the ability to complete assignments within the timeframe specified by the Manager.
- Must be flexible regarding working hours and overtime. Must be able to work overtime in the evenings and weekends, with or without advanced notice.
- Must be able to operate in a fast-paced environment and handle multiple projects simultaneously.
MATHEMATICAL SKILLS: Ability to add and subtract two-digit numbers. Ability to multiply and divide with 10's and 100's.
REASONING ABILITY: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
CERTIFICATES, LICENSES, REGISTRATIONS: Authorization to work in the United States. To conform to U.S. export control regulations, you should be eligible for any required authorizations from the U.S. Government.
PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by a Team Member to successfully perform the essential functions of this job. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the Team Member is regularly required to stand, walk, and hear. The Team Member frequently is required to use hands and fingers; handle, feel, and reach with hands and arms. The Team Member is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl; and smell. The Team Member must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT: The work environments characteristics described here are representative of those a Team Member encounters while performing the essential functions of this job. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the Team Member is regularly exposed to moving mechanical parts. The Team Member may be exposed to a hot and/or cold work environment, chemicals, fumes or airborne particles, loud noises, risk of electrical shock and vibration and/or other occupational hazards; personal protective equipment may be required.
NOTE: This job description identifies the general nature and scope of work to be performed. Vitesse Systems, LLC. reserves the right to revise all or any part of this job description and to add or eliminate essential job functions at any time. Designation of any job duty as an essential function is not intended as an assurance or guarantee that a team member has any right to perform the particular job duty, except as required by Vitesse Systems, LLC. This job description is subject to change based on the needs of the position and/or the Company.
Vitesse Systems, LLC performs work controlled by the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). These statutes require the protection of technical data and products. The regulations require that such data not be disclosed in written, oral, or visual form to any foreign national without prior export authorization from the Department of State. A foreign national is defined by the U.S. Government under EAR 734.2(b)(2)(ii) and 8 USC 110 (a)(20) as one who:
- Is not a United States citizen
- Is not lawfully admitted for permanent residence in the U.S.
- Does not have politically protected status (embassy, refugee, or asylum)
- Has dual U.S. / foreign citizenship
Vitesse Systems, LLC is an Equal Employment Opportunity / Affirmative Action (EEO/AA) Veterans / Disabled Employer
Vacancy posted 3 days ago
Similar jobs that could be interesting for youBased on the CNC Programmer in Newark, CA vacancy
$30 - $40 per hour
...360 Why this job is worth considering This is a hands-on CNC programming role for someone who wants real ownership over how... ...standard for quality before a job runs. It's a good fit for a programmer comfortable working across more than one CAM package and control...SuggestedHourly payWork at office- ...You can see some of our favorite projects here.Start your journey with OBE and help us build the future.What You'll Get to DoThe CNC Programmer is focused on entering all custom patterns into the CAD system for production, interpreting and entering sketches to be...SuggestedContract work
- ...programming, setting up, and operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping... ...candidate should have at least 7 years' experience as a CNC Programmer. The ideal candidate should have at least 7 years' experience...Suggested
- ...Job Description Job Description We are seeking an experienced 3-Axis Vertical CNC Mill Programmer to join our precision manufacturing team in Hayward, CA. This position is Mon-Thu starting at 6 am. The ideal candidate will have strong programming skills and experience...Suggested
- ...Job Description Job Description Job Title: CNC Machinist Location: Fremont, CA Essential Duties and Responsibilities: Perform machine setups quickly, accurately, and efficiently. Collaborate with engineering and CAM programming teams to develop and...SuggestedContract work
$125k - $166k
...Description Job Description Salary: $125k - 166k per year + none Reference: AB_5140724 We are seeking a high-caliber CNC Programmer to drive precision manufacturing operations at our Hayward facility. In this role, you will take ownership of high-complexity...Permanent employmentTemporary workWork experience placementLocal areaShift work$28 - $34 per hour
...Job Description Job Description CNC Machinist II Full Time + Benefits (Medical, Dental, Vision, 401k with Company Match, PTO) Job Type: Onsite Time: M-F, 6:00 am – 2:30 pm Hourly Range: $28.00 - $34.00 DOE Location: Fremont Fralock is an engineered...Hourly payPermanent employmentFull timeWork experience placementLocal areaImmediate startShift work- ...CNC Lathe Operator Program, set- up, operates and control process on all product produced on CNC Lathe. Responsible for executing production plan according to manufacturing schedule and work instructions. Responsible for controlling quality of product according to Inspecti...
- ...be built together, not in isolation — we'd love to build it with you.Job ResponsibilitiesProgramming & MachiningCreate and optimize CNC programs in CAM software (Fusion 360, Mastercam, or similar).Set up and run 5-axis Haas mills and Haas lathes to produce precision prototype...
- CNC Machine Operator Job Responsibilities: This full-time position performs CNC machine set-up, and run production under the direction of the group leader. The Machine Operator will be responsible for the proper machine setup, operation and maintenance. O...Full time
- ...CNC ProgrammerHot JobHeadquarters - Hayward, CA 94544Salary Range $28.16 - $47.26 HourlyOverviewUnder general supervision, the CNC Programmer reports to and assists Sales Personnel to resolve all print issues concerning legibility, missing dimensions or any vital information...Work experience placement
$50 - $60 per hour
...Description SUMMARY Responsible for the creation and revision of CNC programs, complete with tool, fixture, and set-up requirements,... ...related duties as assigned May review work for lower level programmers Requirements REQUIRED High school degree or GED...Full timeWork at office$38 - $48 per hour
### Cookie Noticefor details.## About This RoleRivCut is looking for a skilled CNC Programmer to develop efficient, reliable CNC programs for our precision machining operations. In this role, you'll create CAM programs for complex parts across multiple industries, working...Hourly pay$30 - $50 per hour
...CNC Programmer Foxsemicon Technology, LLC is growing rapidly and is looking for experienced candidates for a CNC Programmer with experience programming 3- and 5-axis CNC mills and CNC Lathes. You will develop new CNC programs for production runs or modify existing...Hourly payFlexible hours$22 - $25 per hour
...-25/HR DOE We are looking for an experienced machine operator to join our production team! Candidates with experience operating CNC equipment, laser cutters, digital cutting tables, flatbed cutters, or similar automated machinery are encouraged to apply. SUMMARY...Shift work- MachinistThe Machinist sets up and operates within the machine shop using various equipment including but not limited to CNC machines and bandsaws. Applies knowledge of machine shop theory and procedures.
$100k - $140k
...engineers to iterate at the pace required to put safe, intelligent humanoids into the real world. Key Outcomes Own end-to-end CNC programming and operation for prototype and small-scale production parts, holding tight tolerances across 5-axis milling and mill-...Full timeTemporary workLocal areaWork from homeFlexible hours- ...CNC Production Operator South Bay Solutions is a precision manufacturing company serving the semiconductor, medical device, aerospace, and advanced technology industries. We specialize in producing high-quality machined components with extremely tight tolerances using...Monday to FridayAfternoon shift
$25 - $28 per hour
Job Description Job Description GRINDER / DEBURRER Pay : $25-$28/hour depending on experience Schedule : Part-Time or Full-Time Shifts Available : Day or Swing Shift (4x10 schedule available) Location : Fremont, CA Position Details : Contract-to-...Permanent employmentFull timeContract workPart timeShift workDay shiftAfternoon shift$27 - $50 per hour
...Job Description Job Description CNC Mill Setup Machinist Sharp Dimension, Inc. | Fremont, CA | Full-Time About the Role We're looking for a CNC Mill Setup Machinist to set up and run multi-axis CNC milling operations, working closely with programming and quality...Hourly payFull timePart timeFlexible hours- ...CNC Machinist / CNC Operator We're looking for a CNC Machinist / CNC Operator to join our growing manufacturing team. In this role, you'll work with CNC mills and lathes, support production, develop innovative solutions, and help create high-quality components in a...Temporary work
- The CNC Machinist III programs and operates computer-controlled machine tools including lathes, mills, and grinders to manufacture precision metal components according to engineering drawings and specifications. This role is responsible for maintaining optimal machine performance...
$50 - $65 per hour
...Job Description Job Description CNC 5-Axis Programmer Location: Fremont, CA Pay: $50–$65/hr, based on experience Direct Hire | Aerospace & Medical Device Manufacturing Overview TekPro is partnered with a leading global manufacturer of precision components...- ...FOR Weekend Swing Shift Part-Time - Saturday and Sunday, 12-hour shift from 3:00 p.m. to 3:30 a.m. SUMMARY OF POSITION: As a CNC Lathe Machinist 3 required to set-up and run the most complex proven or new parts with little to no supervision. Will assist in the development...Part timeApprenticeshipWork experience placementShift workWeekend workAfternoon shift
$29.9 - $50.82 per hour
At a Glance Company: Confidential Employer Location: Fremont, CA (On-site) Job Type: Full-Time Pay Range: $29.90 – $50.82 per hour (based on experience) Shift: Monday – Friday, 6:00 AM – 2:30 PM Experience Level: 4–5 years manufacturing experience...Hourly payFull timeWork experience placementMonday to FridayAll shiftsShift work$35 - $50 per hour
...Job Type: Full-Time Benefits: Medical, Dental, Vision, and Paid Time Off (PTO) Job Summary We are seeking an experienced CNC Machinist to join our team in San Leandro, CA. The ideal candidate will have hands-on experience setting up, programming, and...Hourly payFull timeLocal area$28 - $31 per hour
...focuses on setting up, running, and inspecting parts on surface grinders, rotary surface grinders, Blanchard grinders, manual mills, CNC machines, and polishing, lapping, and slicing equipment. Success in this role requires strong attention to detail, solid knowledge of...Weekly payContract workTemporary workShift work- Machine Shop Equipment OperatorSet-up, operates and control process on all products produced in the machine shop. Responsible for executing production plan according to manufacturing schedule and work instructions. Responsible for controlling quality of product according...
- ...Job Description Job Description Qualifications / Responsibilities: • Experience in CNC • Set up, program, and operate EDM machines (Sodick) a bonus • Strong blueprints readings & GD&T Knowledge • Proficient in the use of CNC mills as well as manual machining...
$33 - $50 per hour
...CNC Machinist We are currently seeking an experienced and reliable CNC Machinist to join our industrial production team. You will set up and program various tools and equipment to create, modify, or repair precision parts. During production, you must monitor the machinery...Hourly payFlexible hours
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to CNC Programmer. Be the first to apply!




