Welder III

Welder III Job DescriptionThis Job Description provides a description of the duties for which the Welder III will be accountable and responsible. The intent of this Job Description is to enable the employee to be successful within the chain of command, by promoting transparent, effective, efficient, and quality corporate operations. Other duties may be assigned to the Welder III from time to time: these additional duties will be communicated directly from the Plant Manager.Vital Link Inc.'s core business is in the fabrication, maintenance, and installation of jet engine test facilities and sound suppression systems. This requires that the corporation support both field and plant operations, while operating both in a commercial and military environment on a worldwide basis. The Welder III in general shall be responsible for ensuring that all assemblies and parts are properly welded and delivered to the painting/shipping department for processing.Essential Duties/ResponsibilitiesEnsure that welding of assemblies is in accordance with the shop drawings, and that the work routers are properly signed and dated.Ensure that all steps, inspections, and other instructions as shown on the work order are followed and documented. Ensure that material and part identification is maintained.Maintain welding equipment.Control welding electrodes, gas, and other supplies as required.Ensure all welds are properly cleaned after welding, and base metal is properly cleaned before welding.Ensure that welding is done in accordance with Vital Link Inc. welding procedures, project specifications, and the standards of the American Welding Society (AWS).Ensure that proper equipment, procedures, supplies, and materials are available and utilized in the execution of welding.Set up basic weldments to facilitate fast quality welding.Ensure that appropriate safety practices, equipment, and gear is used.Ensure that all problems with equipment and machinery are promptly reported to the Supervisor or Maintenance Department for corrective action. Halt production on equipment and machinery if they cannot be safely operated.Responsible to ensure that all welding machines, supplies, equipment, and gear, and the weld-out area in general, are kept in a neat and orderly manner.Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment.Ensure activities are conducted in accordance with Vital Link International Standards Organization (ISO9000) policies.Special RequirementsMust be able to pass a standard AWS test in the horizontal (2G) for 1" and vertical (3G), for structural steel in the size of 1". This position requires the physical capability to perform welding work, moderate to heavy lifting. Position requires knowledge of steel and sheet metal fabrication and welding, specifically welding procedures and the operation of welding equipment. Also requires the ability to read the welding requirements of fabrication drawings and travelers. Ability to do moderate fit-up to include meeting drawing requirements and dimensions.Education and/or ExperienceHigh school diploma or General Education Degree (GED); or minimum 8 years' experience is preferred. Though skill, technical knowledge, discipline, communication, and organizational ability will be the deciding factors for the skill level of welding assigned.Certificates, Licenses, RegistrationsWelding certification is preferred but not required. Must meet VLI welding tests/requirements.Physical DemandsEmployee is frequently required to stand, walk, sit, crouch, bend and occasionally lift and/or move up to (40) pounds. Must have a full range of body movements including the use of hands to fingers, handle or feel objects, climbing, bending, reaching, lifting, and walking. Must have command of sight, hearing, and touch. Must have the ability to coordinate and communicate effectively with other personnel. Should be able to properly lift moderate and heavy steel parts, equipment, and supplies on a routine basis. Must be able to perform medium to heavy physical labor.Work EnvironmentThis position will be working primarily outdoors and in an open shop in all types of weather. This position is exposed to heavy amounts of potentially hazardous dust and fumes requiring the use of safety glasses and protective clothing is required. Noise level in the work environment is usually high and may require hearing protection. Usually eight (8) to ten (10) hour workdays, five (5) days per week with occasional Saturday and Sunday work, as well as additional early and/or late workdays to accommodate special business circumstances. Extended work hours and/or travel may occasionally be required.Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to disability or protected veteran status. If you need a reasonable accommodation, please contact Andrea Lopez at View phone number on click.appcast.io.