UTILITY FLEET MECHANIC

Utility Fleet Mechanic

Gainesville, TX 76240; Midland, TX 79701; Fort Worth, TX 76102

The Fleet Mechanic keeps Force Electrical Services' utility fleet and specialty line construction equipment safe, compliant, and working on the job. Working from a mobile service truck and the company shop, the Fleet Mechanic diagnoses, repairs, inspects, and performs preventive maintenance on heavy- and medium-duty trucks, aerial devices, digger derricks, cranes, and stringing equipment, often on active right-of-way and energized job sites. The role directly supports crew productivity and safety by minimizing downtime, maintaining DOT, OSHA, and ANSI inspection compliance, and responding to equipment failures during routine construction and emergency storm restoration.

Diagnostics and Repair

• Diagnose and repair diesel and gasoline engines, including fuel, cooling, air intake, and aftertreatment systems (DPF, DEF/SCR, EGR), using OEM diagnostic software and scan tools.
• Troubleshoot and repair hydraulic systems, including pumps, valves, cylinders, hoses, rotation and outrigger systems, and power take-off (PTO) units on aerial devices and digger derricks.
• Repair 12/24-volt electrical systems, wiring harnesses, lighting, and electronic controls, including boom and auger control systems.
• Repair and maintain air brake, hydraulic brake, steering, suspension, driveline, and transmission components.
• Perform repairs on line construction equipment such as bucket trucks, digger derricks, cranes, pullers and tensioners, reel and wire trailers, pole trailers, tracked and all-terrain carriers, backyard machines, mini-excavators, skid steers, compressors, and generators.
• Perform basic welding and fabrication (MIG, stick, oxy-acetylene cutting) for bracket, bed, and component repairs within manufacturer and company guidelines.

Inspections and Compliance

• Conduct preventive maintenance and periodic inspections according to OEM schedules and company PM intervals; document all work in the fleet maintenance system.
• Perform frequent and periodic inspections of aerial devices and digger derricks per ANSI/SAIA A92.2 and ANSI A10.31, and coordinate scheduled dielectric testing with qualified testing vendors.
• Support crane inspection programs consistent with OSHA 29 CFR 1926 Subpart CC, and coordinate annual inspections with qualified third-party inspectors.
• Perform DOT annual vehicle inspections under 49 CFR Part 396 when qualified as an inspector under 396.19, and correct defects identified on Driver Vehicle Inspection Reports (DVIRs).
• Remove unsafe vehicles and equipment from service using company lockout/tagout and out-of-service procedures, and communicate status to supervisors and crews.

Field Support and Storm Response

• Travel to job sites, laydown yards, and right-of-way locations to perform roadside and on-site repairs, often in remote areas and adverse weather.
• Deploy with crews for emergency storm restoration, including extended work hours, overnight travel, and multi-week mobilizations.
• Maintain awareness of energized lines and observe minimum approach distances and job site safety requirements under OSHA 29 CFR 1910.269 and 1926 Subpart V while working near line crews.
• Participate in daily job briefings and tailboards when on job sites.

Records, Parts, and Shop Operations

• Complete accurate work orders, inspection records, labor hours, and parts usage in [Fleet Management System].
• Identify, order, and track parts; maintain mobile service truck inventory, tools, and equipment in safe working condition.
• Document warranty repairs and coordinate with OEM dealers and outside vendors as directed.
• Maintain a clean, organized, and safe shop and service truck; properly handle and dispose of fluids, filters, batteries, and hazardous materials in accordance with environmental regulations.
• Perform other related duties as assigned.

Qualifications

Education and Experience

• High school diploma or GED required; diesel/heavy equipment technology certificate or associate degree preferred.
• [3+] years of experience repairing heavy- and medium-duty diesel trucks and hydraulic equipment required.
• Experience with utility fleet equipment (aerial devices, digger derricks, cranes, stringing equipment) strongly preferred.
• Experience in diesel, hydraulic, and chassis systems, and familiarity with Altec and Terex bucket trucks, strongly preferred.

Licenses and Certifications

• Required: Valid driver's license with a driving record acceptable to the company's insurance carrier.
• Required within [90] days of hire: Class A Commercial Driver's License (CDL) with a current DOT medical card. [Adjust to "Required at hire" if applicable.]
• Preferred: ASE certifications (Medium/Heavy Truck T-series), DOT Qualified Brake Inspector, DOT Annual Inspector qualification, and OEM aerial device/digger derrick training (e.g., Altec, Terex).
• Preferred: OSHA 10-Hour Construction, CPR/First Aid, and welding certification.

Knowledge, Skills, and Abilities

• Strong diagnostic ability with diesel engines, hydraulic systems, and vehicle electrical systems; ability to read schematics, hydraulic diagrams, and service manuals.
• Working knowledge of DOT/FMCSA vehicle maintenance requirements, ANSI aerial device standards, and OSHA safety requirements for utility work environments.
• Ability to use laptop-based diagnostic software and electronic work order systems.
• Ability to work independently in the field, prioritize repairs, and make sound decisions about equipment safety.
• Clear communication with crews, foremen, and fleet leadership regarding equipment condition and downtime.
• Must furnish personal hand tools per the company tool list. [Confirm tool policy / tool allowance.]

Physical Requirements and Work Environment

The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Regularly lift, carry, push, or pull up to [75] pounds; occasionally more with assistance or lifting equipment.
• Frequently stand, walk, kneel, crouch, crawl under vehicles, climb onto equipment, and work in confined or awkward positions for extended periods.
• Work outdoors in all weather conditions, including extreme heat, cold, rain, and at night, on uneven terrain and active construction sites.
• Exposure to loud noise, moving mechanical parts, fumes, fuels, lubricants, hydraulic fluid under pressure, and work near energized electrical facilities.
• Required personal protective equipment includes hard hat, safety glasses, FR clothing, high-visibility apparel, gloves, and safety-toe boots, as specified by the Safety Department.
• Must be available for overtime, weekends, on-call rotation, and emergency storm response with short notice.

Safety and Compliance

Safety is a core value at Force Electrical Services. The Fleet Mechanic is expected to follow all company safety policies, OSHA regulations, and DOT requirements; to stop work when conditions are unsafe; and to report hazards, incidents, and near misses promptly. This is a safety-sensitive position. Employees who hold a CDL and perform safety-sensitive functions are subject to DOT drug and alcohol testing under 49 CFR Part 382, and all employees are subject to the company's drug- and alcohol-free workplace policy.

Disclaimer

This job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the position. Duties may change at any time with or without notice. This document does not create an employment contract, and employment with Force Electrical Services, LLC remains at-will. Force Electrical Services, LLC is an Equal Opportunity Employer.

Force Electrical Services, LLC