Building Engineer
$24.56 - $28.89 per hourC&W Services
Job Title
Building Engineer
Job Description Summary
Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties
Job Description
ESSENTIAL FUNCTIONS AND RESPONSIBILITIES
• Perform all plumbing, electrical, or HVAC requirements of the building(s)
• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.
• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings
• Verify field conditions and perform any necessary repairs or adjustments
• Monitor Energy Management
• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property
• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)
• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.
• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris
• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management
• Document and report activities to supervisor
• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns
• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits
• Complete all required C&W Safety Training as scheduled annually
• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours
KEY COMPETENCIES
• Technical Proficiency
• Initiative
• Flexibility
• Multi-Tasking
• Sense of Urgency
IMPORTANT EDUCATION
• High School Diploma of GED Equivalent
• Graduate of apprentice program or trade school preferred
IMPORTANT EXPERIENCE
• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting
ADDITIONAL ELIGIBILITY QUALIFICATIONS
• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)
• May be required to have certification as a Universal Technician for CFC’s depending on market licensure requirements
• Possess and maintain a valid driver’s license and good driving record with periodic checks (where applicable)
• Basic Computing Skills in Outlook, Excel & Word
• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.
• Knowledgeable in energy management systems, techniques and operations.
• Thorough knowledge in all building systems operations, maintenance and repair.
May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties
WORK ENVIRONMENT
This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices
• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine
• Involves movement between departments, floors, and properties to facilitate work
• Ability to speak clearly so others can understand you
• Ability to read and understand information presented orally and in writing
• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics
OTHER DUTIES
This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.
Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements.
The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate’s experience and qualifications.
The company will not pay less than minimum wage for this role.
The compensation for the position is: $24.56 - $28.89
C&W Services is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated.
In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at C&W Services, please call the ADA line at View phone number on click.appcast.io or email View email address on click.appcast.io . Please refer to the job title and job location when you contact us.
INCO: “C&W Services”
$21 per hour
...Job Description Job Description Job Description The primary role of the Building Engineer is to maintain the physical condition of assigned properties through the performance of day-to-day maintenance activities as directed by the Chief Building Engineer. Primary...SuggestedFor contractorsLocal area- ...help shape a brighter way forward. 2ND SHIFT: MONDAY - FRIDAY 2PM - 11PM What this job involves: As an Operating/Building Engineer, you'll play a critical role in keeping our facilities running at peak performance during overnight hours. This position...SuggestedDaily paidFor contractorsMonday to FridayNight shiftAfternoon shift
- ...These resources will be utilizing several trades such as electrical, plumbing, and HVAC to perform preventive maintenance. Monitoring building system and operations. Inspects building systems including fire alarms, HVAC, and plumbing to ensure operation of equipment is...SuggestedWork at officeRemote workDay shift
$24.56 - $28.89 per hour
...Perform all plumbing, electrical, or HVAC requirements of the building(s)• Maintain heating equipment, chillers (air and/ or water cooled... ...inspections and other scheduled routines as directed.• Inspect engine room equipment, fan room equipment, cooling tower, all motors,...SuggestedMinimum wageApprenticeshipWork experience placementWork at officeLocal areaImmediate startFlexible hoursShift work- ...Structural Project Design Engineer (Hybrid) Structural engineer with strong technical skills, an interest in developing leadership... ...mid-rise and high-rise residential, commercial, and industrial buildings Responsibilities: Executes the structural engineering...SuggestedLocal area
- ...VDC Engineer The Weitz Company is hiring a VDC Engineer to join our Mission Critical team on data center projects in San Marcos, TX... ...utilization on assigned project(s). The Weitz Company has been Building a Better Way since 1855. We are a full-service construction...Temporary workFor contractorsInternshipWork at office
- ...Corporation is seeking a detail-oriented Construction Project Engineer (PE)to support the successful execution of federal construction... ...alongside an experienced project team. For someone looking to build a long-term career in construction, this position provides a...For contractorsFor subcontractor
- ...Structural/Civil Field Engineer Facilitate client based building system design, startups & commissioning activities. Provide subject matter expert assistance in review of product and equipment submittals, shop drawings, engineering design drawings and specifications...For contractorsWork at officeWeekend work
- ...Geotechnical Project Engineer — San Antonio, TX Founded in 1964, TTL is an engineering design firm focused on delivering integrated infrastructure solutions for public and private clients. From site and corridor selection to due diligence, design, and construction...Full timeFlexible hours
- ...Limited is seeking an experienced Geotechnical Senior Project Engineer to manage key client projects in our San Antonio office. The Geotechnical... ...in geotechnical, construction materials, environmental and building science + infrastructure consulting services. We are employee-...Work at officeLocal area
- ...Manufacturing & Project Engineer Location: Houston, TX Employment Type: Full-Time, Salaried, Exempt Department: Production Reports... ...or custom manufacturing. • Experience in windows and doors, building products, aluminum fabrication, glass, machining, or assembly....Weekly payFull timeTemporary workFor contractorsCasual workWork at officeLocal areaMonday to FridayAfternoon shiftEarly shift
- ...Consultants is an award-winning and industry-leading global consulting engineering firm, with an unmatched commitment to culture, values, and... ...great benefits, a strong sense of community, and the chance to build a meaningful, long-term career! Job Title - Senior...Temporary workFor contractorsLocal areaFlexible hours
$85k - $135k
...Structural Engineer San Antonio, TX Description Civil / Structural Engineer - BUILDER - SMS Job Type Full-time, Hybrid (remote / on-site... ...(SMS) program. This position will use to develop detailed building reports describing condition of building systems and their major...Full timeLocal areaRemote workRelocation package3 days per week- ..., we are integrating a multitude of these solution elements to build a cleaner and more resilient energy future. We'll provide you... ...in responsible charge of technical quality of challenging engineering tasks in accordance with client expectations, scope, budget, and...For contractorsWork at office
- ...Overview As a member of Garver's Buildings Team, the Structural Engineer will develop structural designs and documentation for various projects within the Buildings Business Line . Responsibilities include structural analysis, design, detailing, and construction...For contractors
$95k - $135k
...continues to grow and expand, we are seeking a talented Dam Engineer to join our Team in Texas! This person can be located anywhere... ...AEC firm, we innovate where transportation, water, power, and buildings converge. We call this the Infrastructure of Life. We measure...Full timeWork at officeRemote work- ...Structural Design Engineer Design and engineer structural steel assemblies, skids, platforms, and support frames for custom generator... ..., mechanical integration, or fuel tank systems. Experience building or fabricating what you design—we value engineers who understand...
$70k - $95k
...currently looking hard working and motivated Travelling Field Engineer (AKA: Project Engineer) who will support Project Managers in the... ...sustainable solutions. Our team of passionate innovators designs and builds cutting-edge water and wastewater treatment systems that...Contract workWork experience placementFor subcontractorLocal areaRemote work- ...Senior Geotechnical Engineer Location: Austin, TX, US, 78759 Houston, TX, US, 77024 Dallas, TX, US, 75019 San Antonio, TX, US, 78258 Langan provides expert land development engineering and environmental consulting services for major developers, renewable energy...Full timeTemporary workWork at officeWorldwideFlexible hours
- ...Senior Geotechnical Engineer At HDR, our employee-owners are fully engaged in creating a welcoming environment where each of us is... ...a must What We Believe HDR is our company. Together, we build on each other's life experiences and perspectives to make great...Contract workWork at office
- ...Engineering ManagerTindall Corporation is a leading Precast Concrete Manufacturer, with locations throughout the Southeastern U.S. Our mission... ...able to provide recommendations despite uncertainty.Ability to build trust and relationships with other departments within the...For contractors
- ...Manufacturing Engineer Summary The Toyoda Gosei Group is a leading global manufacturer of rubber and plastic automotive components,... ...engineer's role. Hands-on Application: practical skills in building prototypes, conducting experiments, and testing designs are valuable...Work at office
- ...commitment guides everything we do! At Texas Scenic Company, we design build, and deliver world-class theatrical stage systems with an... ..., expertise and teamwork! We are hiring a Manufacturing Engineer in our San Antonio location. As a Manufacturing Engineer you will...Temporary workWork at office
$67k - $95k
...Manufacturing Engineer Johnson Controls, a global leader in thermal management, mission-critical building systems, energy efficiency, and decarbonization, helps customers use energy more productively, reduce carbon emissions, and operate with the precision and resilience...$86.4k - $129.6k
Schneider Electric is searching for a Project Engineer specializing in Building Automation System (BAS) to make an impact within our organization. This position will sit within our Digital Buildings organization. In this role you will be responsible for project coordination...Full timeTemporary workFor contractorsFor subcontractorRemote workFlexible hours$76.1k - $114.1k
...Manufacturing Process Engineer Johnson Controls, a global leader in thermal management, mission-critical building systems, energy efficiency, and decarbonization, helps customers use energy more productively, reduce carbon emissions, and operate with the precision...- ...Description Job Description Job Summary: The Structural Engineer will perform independent structural design and work... ...JOB DUTIES: Design structures – ground-up, industrial buildings/facilities, commercial buildings, and healthcare facilities....For contractorsWork at officeLocal area
- ...Description Required Education/Experience: Bachelor's degree in Engineering is a must and Mechanical, Industrial, and Manufacturing would... ...manufacturing tools and equipment to be able to support prototype pilot build constructions Availability to work OT and/or Weekends as...Weekend work
- ...Manufacturing Engineer Location: San Antonio, TX Job Description: Roles & Responsibilities: Creating 3D Models in Autodesk Inventor with required level of details Interpretation of 2D drawings & supplier provided format drawings Ability to understand...
- ...root cause analysis on production issues and implement effective corrective and preventive actions. Collaborate with Quality Engineering to resolve nonconformances and improve process capability. Analyze production data and key performance indicators (KPIs) to identify...Work at office
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Building Engineer. Be the first to apply!



