Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Building Engineer

$23.8 - $28 per hour

Cw

Job Title Building Engineer Job Description Summary Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties. Job Description • Perform all plumbing, electrical, or HVAC requirements of the building(s) • Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc. • Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings • Verify field conditions and perform any necessary repairs or adjustments • Monitor Energy Management • Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property • Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.) • Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices, including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed • Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris • Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management • Document and report activities to supervisor • Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns • Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits • Complete all required C&W Safety Training as scheduled annually • Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours IMPORTANT EDUCATION High School Diploma of GED Equivalent Graduate of apprentice program or trade school preferred IMPORTANT EXPERIENCE 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting ADDITIONAL ELIGIBILITY QUALIFICATIONS Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.) May be required to have certification as a Universal Technician for CFC’s depending on market licensure requirements Possess and maintain a valid driver’s license and good driving record with periodic checks (where applicable) Basic Computing Skills in Outlook, Excel & Word Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc. Knowledgeable in energy management systems, techniques and operations Thorough knowledge in all building systems operations, maintenance and repair May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties WORK ENVIRONMENT This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions. PHYSICAL DEMANDS Must have ability to frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices Regularly required to crouch and reach to install/move equipment Involves movement between departments, floors, and properties to facilitate work Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements. The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate’s experience and qualifications. The company will not pay less than minimum wage for this role. The compensation for the position is: $23.80 - $28.00 Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated. In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at View phone number on click.appcast.io or email View email address on click.appcast.io. Please refer to the job title and job location when you contact us. INCO: “Cushman & Wakefield” #J-18808-Ljbffr

Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the Building Engineer in Wendell, NC vacancy
  • $23.8 - $28 per hour

     ...Building Engineer Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment... 
    Suggested
    Apprenticeship
    Work experience placement
    Work at office
    Local area
    Immediate start
    Flexible hours
    Shift work

    Cushman & Wakefield

    Wendell, NC
    1 day ago
  • $83.97k - $143.94k

     ...AmericaSalary: $83,966 - $143,942Company: Siemens R&D Design Engineer - Power Distribution Equipment Job ID Posted since 09-...  ...-efficient factories, resilient supply chains, and smarter buildings and grids, to sustainable transportation as well as advanced healthcare... 
    Suggested
    Permanent employment
    Full time
    Work at office
    Local area
    Immediate start
    Remote work
    3 days per week

    Siemens

    Wendell, NC
    2 days ago
  • $25 - $25.5 per hour

     ...We are seeking qualified candidates to join our Manufacturing Engineering Internship beginning in May or June 2027. This position will be...  ...‑efficient factories, resilient supply chains, and smarter buildings and grids, to sustainable transportation as well as advanced healthcare... 
    Suggested
    Permanent employment
    Full time
    Internship
    Summer internship
    Work at office
    Immediate start
    Relocation package

    Siemens

    Wendell, NC
    2 days ago
  •  ...Job Description Job Description Jr. Product Engineer  Department: 171024 – Product Business Department Reports to: Director of Product Business Location: Wendell, NC Position Status: Salary Status: Full-time Management Level: Non-Management... 
    Suggested
    Full time

    KIOTI Tractor

    Wendell, NC
    a month ago
  •  ...collaborating with the business's best talent. It's having a part in building a better future. It's making a difference in people's lives....  ...Assist in preparation of MEP assessments and prepare detailed engineering reports.Coordinate project specific engineering.Develop scope... 
    Suggested
    For contractors
    Work at office
    Trial period

    MSS Solutions, LLC

    Zebulon, NC
    5 days ago
  •  ...collaborating with the business's best talent. It's having a part in building a better future. It's making a difference in people's lives....  ..., productivity tracking, and budget updates.Work with engineering on the specification and pricing of purchased equipment to ensure... 
    For contractors
    For subcontractor
    Work at office

    MSS Solutions, LLC

    Zebulon, NC
    2 days ago
  • $25 per hour

     ...environment. We are seeking qualified candidates to join our Design Engineering Summer - Fall Co-op beginning in May 2027. This position will...  ...-efficient factories, resilient supply chains, and smarter buildings and grids, to sustainable transportation as well as advanced... 
    Hourly pay
    Permanent employment
    Full time
    Summer work
    Internship
    Work at office
    Local area
    Immediate start
    Relocation package

    Siemens

    Wendell, NC
    2 days ago
  •  ...Industrial Engineer Location: Wendell, NC Our client is hiring an Industrial Engineer to help design, improve, and scale manufacturing processes for engineered protection and automation panel production.Responsibilities include: - Improve safety, ergonomics, and workflow... 

    Synerfac Technical Staffing

    Wendell, NC
    2 days ago
  • $52.84k - $90.58k

     ...manufacturing processes. We are looking for a Manufacturing Engineering Technician. This position will be based in Wendell, NC. The...  ...-efficient factories, resilient supply chains, and smarter buildings and grids, to sustainable transportation as well as advanced healthcare... 
    Full time
    Immediate start

    Siemens

    Wendell, NC
    3 days ago
  •  ...R&D Design Engineer - Power Distribution Equipment Location: Wendell, NC (Hybrid - 3 days onsite/week) Our client is hiring an R&D Design Engineer to design and refine switch devices, switchgear, and circuit breakers, working alongside international cross-functional teams... 
    3 days per week

    Synerfac Technical Staffing

    Wendell, NC
    2 days ago
  •  ...Responsibilities ECS is seeking a Structural Project Engineer to join our Southeast Building Science + Infrastructure team in Raleigh, NC. In this role, you will support structural engineering and consulting projects through a combination of field investigations,... 
    For subcontractor
    Local area

    Ecs Southeast

    Knightdale, NC
    3 days ago
  •  ...schedule, ensuring timely and effective project delivery.Ensure that project design and delivery comply to all relevant EHS and Engineering and Quality procedures/standards, leveraging the expertise of SMEs to confirm compliance throughout the project lifecycle.Responsible... 
    For contractors
    Worldwide
    Flexible hours

    GSK LLP

    Zebulon, NC
    2 days ago
  •  ...Position Description About Us At Barringer Construction, we build more than buildings we build relationships, careers, and an...  ...and develop Project Managers, Assistant PMs, and Project Engineers growing the next generation of Barringer leaders. # Anticipate... 
    Temporary work
    For contractors
    For subcontractor
    Work at office
    Local area
    Flexible hours
    Weekend work
    Afternoon shift
    Early shift

    Barringer Construction

    Wendell, NC
    4 days ago
  • $101.55k - $169.25k

     ...Raleigh, North Carolina office of Wiss, Janney, Elstner Associates, Inc. (WJE), where we are seeking a seasoned Senior Structural Engineer with 10+ years of experience to join our dynamic and diverse team of architects and engineers. Working at WJE is a team... 
    Work at office
    Immediate start
    Worldwide

    Wiss, Janney, Elstner Associates, Inc.

    Knightdale, NC
    5 days ago
  • $132.38k - $220.63k

     ...industry-leading, Associate Principal or Principal Geotechnical Engineer to be an integral part of expanding and developing our...  ...forensics, problem-solving, and remediation challenges related to buildings and/or infrastructure; preparing technically excellent client... 
    Work at office
    Immediate start
    Worldwide

    Wiss, Janney, Elstner Associates, Inc.

    Knightdale, NC
    5 days ago
  •  ...Perform other duties as assigned Education And/Or Experience: ~ Associate’s or Bachelor’s degree in Construction Management, Engineering, or related field preferred ~5+ years of experience in construction project management, estimating, or heavy civil operations... 
    For subcontractor
    Work at office
    Local area
    Monday to Friday
    Night shift
    Weekend work
    Afternoon shift

    Sunrock

    Zebulon, NC
    8 days ago
  •  ...Solutions, LLC currently has an opening available for a Project Engineer – Design and Development in our Raleigh, NC office If you are...  ...with the business's best talent. It's having a part in building a better future. It's making a difference in people's lives.... 
    Temporary work
    Work at office
    Trial period
    Flexible hours

    MSS Solutions, LLC

    Zebulon, NC
    a month ago
  •  ...Eaton's IS AER FED Aerospace ( Hydraulic Hose & Tubing) division is currently seeking a Sr. Manufacturing Engineer. The expected annual salary range for this role is $86000 - $ 120,000 a year. Please note the salary information shown above is a general guideline... 
    Permanent employment
    H1b
    Local area
    Relocation package

    Eaton Aerospace

    Middlesex, NC
    5 days ago
  •  ...Our client is seeking a Manufacturing Engineer to join their team. This position is responsible for improving manufacturability, establishing...  ...helps people gain experience with leading organizations, build sought-after skills and take the next step toward a brighter future... 
    Work at office

    Manpower Engineering

    Clayton, NC
    2 days ago
  •  ...Job Description Job Description Project Engineer - Heavy Civil Construction Position Summary: The Project Engineer supports the planning, coordination, and execution of infrastructure and construction projects from pre-construction through completion. This... 
    For subcontractor
    Work at office
    Local area
    Monday to Friday
    Night shift
    Weekend work

    Sunrock

    Zebulon, NC
    8 days ago
  • Manage all phases of healthcare construction projects, including planning, scheduling, budgeting, and execution Coordinate daily activities with subcontractors, vendors, and internal teams to maintain project timelines and productivity Develop and maintain project schedules...
    For subcontractor

    Synerfac Technical Staffing

    Zebulon, NC
    5 days ago
  •  ...environment.  We are seeking qualified candidates to join our Project Engineer Internship beginning in May or June 2027. This position will...  ...-efficient factories, resilient supply chains, and smarter buildings and grids, to sustainable transportation as well as advanced... 
    Permanent employment
    Full time
    Internship
    Summer internship
    Work at office
    Immediate start
    Relocation package
    Wendell, NC
    28 days ago
  •  ...Description Performs a variety of manufacturing engineering assignments to implement production/processing methods and controls to...  ...throughput and quality. Provides input regarding the purchase or building of new equipment or modernization of existing production/... 

    Mayville Engineering Company, Inc.

    Knightdale, NC
    4 days ago
  •  ...Responsibilities ECSis hiringa Principal Geotechnical Engineer to join our transportation teamin the Southeast. This role provides...  ...leader in geotechnical, construction materials, environmental and building science + infrastructure consulting services. We are employee-... 

    Ecs Southeast

    Knightdale, NC
    5 days ago
  •  ...Entry-Level Construction Materials Engineer Requisition Number: 2026-1050-15 Are you just starting out, a recent or upcoming graduate...  ...you a personal stake in our success and the opportunity to build long-term wealth while helping shape our future. Career... 
    Full time
    For contractors
    Work at office

    S&ME

    Knightdale, NC
    2 days ago
  • $125k - $160k

     ...Senior Environmental Engineer Requisition Number: 2026-1050-12 Salary: $125k-$160k/year Sign-on Bonus: $5,000 Are you a...  ...float, and we move forward together. By developing employees, building client relationships, and pursuing new strategies, we create opportunities... 
    Full time
    For contractors
    Work at office
    Local area
    Relocation package

    S&ME

    Knightdale, NC
    4 days ago
  •  ...team is looking for a confident and passionate Traffic Project Engineer (PE) to join our team in the Southeast. As a Top Workplace, this...  ...environment is essential Strong active listening and team building skills Possess valid driver's license Bolton & Menk will... 
    For contractors
    Live in
    Flexible hours

    Bolton & Menk, Inc.

    Knightdale, NC
    5 days ago
  •  ...Job Description Job Description Description: Baker Thermal Solutions is seeking a highly capable Manufacturing Engineer to serve as the critical link between Engineering and Operations. This position is responsible for improving manufacturability, establishing... 
    Work at office

    Baker Thermal Solutions, LLC

    Clayton, NC
    a month ago
  •  ...employment strategy for professional development, and a rewards program to celebrate employee dedication. About the Role: The Design Engineer plays a critical role in supporting the manufacturing process by creating working designs of custom equipment while considering... 

    METAL MASTERS FOODSERVICE EQUIPMENT CO INC

    Clayton, NC
    a month ago
  •  ...schedule, and budget compliance. Conduct kickoff, progress, coordination, and close-out meetings with internal teams, subcontractors, engineers, and owners. Manage project documentation, budgets, procurement plans, invoices, purchase orders, and subcontractor agreements.... 
    Full time
    For contractors
    For subcontractor
    Immediate start

    HCRC

    Zebulon, NC
    a month ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Building Engineer. Be the first to apply!