Welding Inspector
$21 - $25 per hourSavannah Tank and Equipment Corporation
Job Description
Job Description
Weld Quality Inspector – Fabrication
Pay: $21.00–$25.00 per hour
Full-time | On-site | Savannah, GA
Savannah Tank & Equipment Corporation is expanding its Quality Control team and is seeking a Weld Quality Inspector to support quality throughout the fabrication process.
This position works directly on the shop floor inspecting fabricated tanks and equipment, identifying quality issues, maintaining inspection records, and working with production personnel to make sure work meets drawings, specifications, and applicable quality requirements.
What You'll Do- Visually inspect completed and in-process welds for size, length, workmanship, and visible defects.
- Inspect welds produced using GMAW, FCAW, GTAW, and SAW processes.
- Identify visible defects such as porosity, cracks, pinholes, incomplete work, or other unacceptable conditions.
- Perform regular shop-floor inspections at designated quality checkpoints.
- Verify fabricated equipment for dimensional accuracy and conformance with fabrication drawings.
- Clearly and promptly communicate quality concerns to the Quality Control Manager, supervisors, and production personnel.
- Track quality issues and verify that corrective work has been completed.
- Create and maintain inspection reports, checklists, and other quality records.
- Assist with maintaining Material Test Reports and material traceability documentation.
- Assist Receiving Quality personnel with dimensional verification when needed.
- Witness pressure testing to verify fabricated equipment is leak-free.
- Perform pre-shipment inspections to verify required components and accessories are complete.
- Use Microsoft Outlook, Excel, Word, and company systems to maintain quality documentation.
- Work overtime as needed.
- Perform other quality-control duties as assigned.
Required:
- Working knowledge of welding and metal fabrication processes.
- Ability to visually identify common welding and fabrication defects.
- Ability to accurately read tape measures, fabrication drawings, blueprints, and schematics.
- Strong attention to detail and accurate documentation.
- Ability to clearly and promptly communicate quality concerns.
- Comfortable using Microsoft Outlook, Excel, and Word.
- Ability to work independently and professionally with production employees, supervisors, customers, and outside inspectors.
- Ability to maneuver around, over, under, and when required, inside fabricated equipment to perform inspections.
- Ability to work overtime as needed.
- Must meet Savannah Tank's pre-employment requirements.
- 2+ years of welding inspection, welding, fabrication, or closely related quality experience.
- Familiarity with GMAW, FCAW, GTAW, and/or SAW welding processes.
- Working knowledge of NDE inspection practices.
- Familiarity with ASME and API requirements for tank or pressure-vessel fabrication.
- Previous experience performing dimensional or fabrication inspections.
- Experience documenting and resolving quality issues in a manufacturing environment.
- Are eager to learn and improve your inspection knowledge.
- Notice details others miss.
- Are comfortable speaking up when something doesn't look right.
- Can explain a quality issue without turning it into a confrontation.
- Follow problems through until they're actually resolved.
- Take pride in accurate, complete documentation.
Reports To: Quality Control Manager
Powered by JazzHR
mf520VUu4D
- ...construction materials testing projects. This role focuses on specialized testing disciplines such as structural steel inspections, welding observations, and/or non-destructive evaluation (NDE) while working under the direction of more experienced staff. The Specialty...SuggestedFor contractorsLocal area
$21 - $33 per hour
...and girders, following blueprints and directions from the supervisor Aligned steel members in position for permanent bolting or welding into place Hoist steel beams, girders, or columns into place, using cranes or signaling hoisting equipment operators to lift and...SuggestedWeekly payDaily paidPermanent employmentTemporary workApprenticeship- ...commitment to safety, organization, and efficiency. The Sheet Metal Fabricator is a skilled person who specializes in cutting, shaping, welding and assembling metal sheets to create products. You have a keen eye for detail and take pride in producing high-quality work with...SuggestedFull timeTemporary workMonday to Friday
$20 per hour
Sheet Metal Mechanic Delta Metals Inc. is Southeast Georgia’s largest sheet metal and roofing contractor. Founded in 1959, we strive to provide clients with high quality products and superior service at competitive prices. Our products are fabricated in our factory...SuggestedTemporary workFor contractorsWork experience placement- ...turnbucklesHammers, flame-cuts, files grinds irregular edges of sections or structural parts to facilitate fitting edges togetherBolts or arc-welds structures and sections together. Positions drums and headers into supports or bolts or welds supports to frameAligns water tubes,...Suggested
- Sheet Metal Mechanic (Aircraft) Duties The following are the responsibilities of a Sheet Metal Mechanic (Aircraft), WG-3806-10: Independently inspects aircraft and determines the nature and extent of repairs to be made, using applicable technical orders as guidelines...Local areaImmediate startRelocation packageFlexible hoursRotating shift
- ...Quality Inspector The Quality Inspector verifies product quality by performing inspections on the production line. This role verifies ongoing conformance with established quality standards and rejects non-conforming parts for inconsistent color, function, fit, and cosmetic...
$17 per hour
...Now hiring for a Quality Inspector Location: Garden City, GA Pay Rate: $17.00 per hour Schedule: Monday - Friday | 2nd Shift | 3:00 PM - 11:30 PM Be the Reason Every Product Passes the Test. As a Quality Inspector in Garden City...Hourly payWeekly payImmediate startMonday to FridayShift workAfternoon shift- Overview The Quality Control Checker is responsible for the accurate checking or counting of all products for both inbound and outbound freight. Responsibilities Ensures that the quantity, quality and labeling and addressing of outbound orders. Reports shortages, damages...For contractorsLocal areaNight shift
- ...chemical grouting. About the Role We believe that a quality construction project is critical to our success. The Quality Control Inspector role varies from project to project based on the scopes being performed, but may include the following: Reviewing the project plans...Work at office
- ...finishes on fabricated stainless steel and alloy equipment. This includes hand polishing standalone mixer parts as well as blending weld seams and removing scuff marks on pressure vessels. This role requires exceptional attention to detail to ensure our equipment meets...
- ...Combo The Combo Welder must be able to join metal parts, such as pipe or metal plates as specified by layout, blueprints, work orders, welding procedures or oral instructions through the application of heat or electric arc-welding equipment. Other duties may be assigned....Daily paidFull timeRelocationWork visa
- ...Welder PositionRole Overview: The Welder is responsible for performing basic welding and steel fabrication tasks in support of the production of structural steel components for construction projects. This position involves reading shop drawings, measuring, cutting, fitting...Remote work
- ...Job Title Welding Specialist Job Description Selects type and size of pipe or other related materials and equipment according to specifications. Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of...Full time
- ...Perdue Dr. Garden City, GA. 31408 Shift: Mon-Fri 8:00am-4:00pm Starting Pay: Dependent on experience Role overview: Handles welding and fitting both mild steel and stainless steel, welding parts together using both gas welding or brazing and any combination of...WorldwideFlexible hoursShift work
- ...Solutions, a global manufacturer of agricultural machinery, parts, and equipment, is seeking a skilled MIG Welder to fit, fabricate, and weld metal components and assemblies. This position interprets production drawings, sets up welding equipment, and produces accurate,...
- Job Description Job Description We are seeking a motivated and detail-oriented Entry-Level Industrial Mechanical Engineer to join our engineering and maintenance team in a fast-paced food manufacturing environment. This position will support the maintenance, troubleshooting...InternshipWork at office
$211.72k
Company Overview Check out this video and find out why our team loves to work here! ( Join Us! CDM Smith – where amazing career journeys unfold. Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful...Work experience placementH1bWork at office$46.97 per hour
Company Overview Check out this video and find out why our team loves to work here! ( Join Us! CDM Smith – where amazing career journeys unfold. Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful...Work experience placementH1bImmediate startFlexible hours- Mechanical Technician (Bilingual Korean required)\n\nTimpl had partnered up with a global EV battery manufacturing company and is\nlooking for a Mechanical Technician. \n\nSummary\nThis position will serve as a subject matter expert and perform maintenance\ntasks on a ...Work at office
- ...Valid driver's license and reliable transportation required. TWIC card required. HAZWOPER preferred. Proficiency of field welding of structural steel while at elevated locations and in confined spaces required. Proficiency of pipefitting / welding preferred...Temporary workDay shift
$159.43k
Company Overview Check out this video and find out why our team loves to work here! ( Join Us! CDM Smith – where amazing career journeys unfold. Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful...Contract workFor contractorsWork experience placementH1bImmediate startOverseasFlexible hours$25 - $35 per hour
...experienced Welder/Fabricators for true ASME code work. Relocation assistance available — out-of-town candidates can submit a video weld test. Pay and Benefits: ~$28.00 – $35.00/hour for experienced tank builders and welders ~$25.00 – $27.00/hour for less...Relocation package- Human Factors Engineer - Technical Specialist II Human Factors Engineer - Technical Specialist II in GAC Savannah Unique Skills: On any given day, you may: Design and lead part task simulation evaluations for detailed design requirement definition using software and...
$23 - $25 per hour
...to grow your technical skills in a stable facility where your dedication to excellence is truly valued.How You Will Make an Impact:Weld and assemble custom aluminum and steel frames for awnings, canopies, and pergolas.Grind, sand, and finish metal surfaces to ensure every...Hourly payFull timeMonday to Friday- ...an experienced Welder/Fabricator to join our growing team. The ideal candidate will have extensive experience fabricating and welding carbon steel and stainless-steel components, with the ability to work independently from engineering drawings to produce high-quality...Full time
- ...Company Name: Mitsubishi Power Americas, Inc. Location Pooler, GA, US, 31322 Job Description Quality Inspector Company Overview At Mitsubishi Power, we're not just building better clean energy technologies; we're architecting a better future. Our team is boldly redefining...
- ...Transportation Security Inspector – Aviation Opportunities in Savannah Transportation Security Inspectors help ensure that airports, air carriers, cargo facilities, and other regulated aviation organizations follow federal transportation-security requirements. Rather...Full timeWork at officeLocal areaFlexible hoursNight shift
- Repair and Tool TechnicianPosition Purpose: Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained...
$15 per hour
...Quality Inspector – Manufacturing Location: Automotive Manufacturing Facility 1st Shift: 6:30 AM – 5:00 PM | $15.00/hr 2nd Shift: 4:30 PM – 1:00 AM | $15.50/hr Job Overview We are seeking dependable and detail-oriented Quality Inspectors to join a manufacturing...Hourly payShift workDay shiftAfternoon shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Welding Inspector. Be the first to apply!


