Derrick Hand
Ranger Energy Services, LLC
Derrick Hand
The Derrick Hand is responsible for monitoring and maintaining proper procedures of the daily operations of the well servicing rig. The Derrick Hand assists in all duties on the rig site to include rigging up and down, picking up or laying down tubing, working the rig floor, and assisting in operating the rig when necessary.
Essential Duties And Responsibilities:
- Performs fall arrest system, harness, derrick, and hoisting component inspections as required
- Ability to correctly operate the Geronimo
- Performs fall protection donning and doffing as required
- Assist in racking of rod of tubing
- Pulls and lays down rods, tubing, casing, and other equipment as needed. At times, lifting of equipment may require the use of a forklift, winch, or assistance of other crew members
- Participate in meet and greet at location sites
- Participate in JSA and tail gate meetings as scheduled
- Assist in pipe tallying, rigging up and down, nipple up and down of BOP units, and pipe handling
- Responsible for keeping work site, equipment, and tools clean and in good working order
- Assist in the day to day lubrication and minor adjustments of equipment
- Ability to understand Hazard ID cards and near hit cards, as well as follow standard operating procedure for completion of cards
- Assist in the daily inspection and maintenance of equipment
- Successfully perform elevator handling, hardline construction, and energy isolation procedures
- Trains and mentors floor hand on day to day operations
- Daily communication with Rig Operator on work site operations and maintenance
- Assist in operating the rig when requested and deemed competent by supervisor
- Responsible to stop work if conditions are unsafe and report concerns immediately
- Report all incidents as per the standard operating procedures
- Other duties as assigned
Required Education, Qualifications And Experience:
- 1+ year(s) of experience working on a well servicing rig preferred
- Must be familiar with pump and tank operations
- Must have a valid state issued driver's license, CDL, or the ability to obtain one
- Must be able to successfully perform the duties of a floor hand
- Ability to perform manual labor required to operate well servicing equipment
- Ability to show knowledge of running tongs and all other equipment
- Competent communication skills
- Must be able to multi-task in a fast-paced environment
- Ability to work a flexible schedule
Computer:
- Basic knowledge of MS Office preferred
Pre-Employment Requirements:
Must complete and pass all required pre-employment screenings.
About The Company:
Ranger Energy Services is an oil & gas completion and production solutions company with a foundation built on well servicing, wireline, and natural gas processing. Ranger Energy is committed to providing employees with a benefits program that is both comprehensive and competitive. The programs are designed to invest in you and the things you care about – your health, your family, and your future. Come join our team of highly skilled, motivated employees, working on state-of-the-art equipment with outstanding compensation and additional benefits, including:
- Medical/Dental/Vision
- Flexible Spending Account/Health Savings Account
- Life Insurance
- Short- and Long-Term Disability Insurance
- Employee Assistance Program
- 401(k) Retirement Plan with Employer Match
- PTO (depending on eligibility)
Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
- ...Description ***This job has preference to qualified local job seekers within 60 miles of our Axis Williston, ND facility. The Derrick Hand is part of a 4–5-person workover rig crew responsible for performing services on workover rigs. This position reports to the...SuggestedLocal areaShift work
- ...within 60 miles of our Axis Williston, ND facility. The Floor Hand position is part of a 4-5 person workover rig crew on a well... ...related field duties. Constantly climb, including ladders and derrick structures up to 50 feet, and perform elevated work on the tubing...SuggestedLocal areaShift work
$16 - $20 per hour
...Flowback Hand Location: Williston, North Dakota Under general supervision Flowback Hands will perform tasks related to well testing, such as load out equipment for jobs, and rig up/rig down the well testing equipment. Maintain and operate equipment; carry out rig-in...SuggestedHourly pay- Job Description Job Description Description: Scope of Work Provides technical expertise and manual skill in the inspection, servicing, and repair of all NCI vehicles. Duties & Responsibilities: These are not listed in relation to their priority or importance...SuggestedFor contractors
- ...Description Benefits: Health insurance Paid time off Training & development Job Overview We are seeking a dedicated Yard Hand/Delivery Driver to join our team. The ideal candidate will assist in the day-to-day operations of our yard, ensuring efficiency and...Suggested
- SUMMARYThe Floor Hand is responsible for performing tasks associated with the operations of a well servicing rig. The Floor Hand I works under the direct supervision of the Rig Operator and Tool Pusher to carry out all assigned job duties.ESSENTIAL DUTIES AND RESPONSIBILITIES...Full timeFlexible hours
- ...Slickline Field Service Hand Location: Williston, ND Job Requirements: Physical ability to perform medium to heavy manual labor. Position requires standing, walking, and sitting, while working both indoors and outdoors. Ability to read, write and speak English...Local areaImmediate start
$24.5 per hour
...Job Description Job Description Now hiring motivated individuals looking for a hands-on career. Position specific training provided as well as other safety and equipment certifications. Schedule: ~ Full-time position ~ Monday - Friday ~8-10 hour shift ~...Full timeImmediate startMonday to FridayShift work$15 - $17 per hour
...Job Description Job Description Pay: $15.00 - $17.00 per hour Job description: Reconditioning Wash / Shop hand tech Red Rock Reconditioning Center in Williston, ND is looking for a highly motivated, hardworking individual to join our family-oriented team...Hourly payFull timePart timeMonday to FridayShift workDay shift- Job Title: Oilfield Medic & H2S Airhands Location: Bakken Oilfield, Williston North Dakota Company: Sideworx Connect Job Type: Temporary Oilfield Medics & H2S Airhands (Turnaround/Shutdown Work) Wage: Dependent on experience & job type. Job Description...Temporary workImmediate startWeekend work
- Liberty Lift Solution's mission is to continue to advance the design and performance of our products and services to meet the changing environment of the oil and gas industry. Our vision is to be the most customer-focused, knowledgeable, and successful Artificial Lift ...Temporary work
- ...two (2) years Rig Operator experience required and at least two (2) years (prefer 3 years) operational and safety experience as a Derrick Hand and Floor Hand required. Working knowledge of basic service mechanical functions. Ability to access the work environment...Local areaAll shiftsShift work
- ...needed Understands job steps and arranges rods and tubing in derrick correctly Understand the rig's hydraulic, pneumatic and electrical... ...and mud pump Able to instruct floor and derrick hands in use of all safety equipment Able to instruct the floor and...Temporary workFor contractorsImmediate startFlexible hours
$18 - $20 per hour
...high-pressure situations. * High school diploma or equivalent. Physical Demands: * Regularly required to walk, stand, and use hands to reach. * Frequently required to stoop, kneel, crouch, or crawl. * Must be able to lift and move up to 50 pounds occasionally.Full timeLocal areaShift work$80k - $110k
...Demands While performing the duties of this job, the employee is regularly required to stand; walk; and stoop, kneel, or crouch. Uses hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to sit. The employee...Full timeContract workWorldwide- ...within the company. Princeton Management is an Equal Opportunity Employer Requirements: Must be HVAC certified. Must have hands on experience using gauges, meters and necessary hand tools. Should have a strong mechanical ability. Knowledge of basic...Flexible hours
- ...Primary responsibility is to perform vehicle troubleshooting, repair and maintenance work on chassis and track mounted aerials, digger derricks, cranes, high rail, and other equipment, in accordance with dealer and factory standards, in the field. Essential Duties and...Local areaImmediate startNight shiftDay shift
$21 - $24 per hour
...courses in electrical, plumbing and heating or equivalent industry certification preferred. Other Requirements ~ Must provide own hand tools All candidates are required to pass a background check and drug test as a condition of employment; additionally,...Hourly pay- ...commercial maintenance, while supporting the development of training programs aligned with regional employer needs. This position combines hands-on instruction, employer engagement, and program development to prepare students and incumbent workers for careers in plumbing,...Full time
- ...limited standardization exists. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; and talk or hear. The employee frequently is required...Hourly payNight shiftWeekday work
$21 - $27.5 per hour
...About You You’re passionate about your work. You’re driven to achieve ambitious goals. You step up when the team needs an extra hand and aren’t afraid to ask for help when you need it. You act with integrity and empathy for the people around you. You make smart decisions...Full timeTemporary workLocal areaImmediate startMonday to FridayFlexible hoursWeekend workAfternoon shift- ...’ll have access to: Brand partnership discounts Scholarship Opportunities Opportunity to earn University course credits Hands on career experience in a restaurant business PREREQUISITES Education : Some high school or equivalent Experience : No previous...Full timePart timeWeekend workDay shiftAfternoon shift
- ...and coordinating staff development initiatives Administering ongoing training activities and competency evaluations Provide hands-on training in product handling, inspection processes, and field service execution. Mentor and develop personnel to ensure competency...
$3,000 per month
...will be required. There will be a regular expectation to pull, push, reach, walk, stand, sit, crawl, kneel, bend and have the use of hands and fingers, use of both eyes for sight, including ability to distinguish color and distance, hearing, extensive use of arms and...For contractorsWork experience placementWork at officeRelocationAll shiftsNight shiftAfternoon shift$15 - $17.1 per hour
...Mike's childhood nickname, Rocky's serves up 100% fresh, never frozen ground steak burgers, all-beef franks straight from the Bronx, hand-cut fries, homemade chili, hand-spun shakes, and more. With dine-in, drive-thru, online ordering, and delivery, we're all about...Hourly payCasual workLocal areaImmediate startFlexible hours$25 per hour
...for you: An internship with Halliburton will provide great insight to see if this is the right career for you. You’ll receive hands-on, real-world work experience that will help you prepare for the next step in your career. You’ll become an integral part of our...Permanent employmentFull timeWork experience placementSummer workInternshipSummer internshipRelocationVisa sponsorshipWork visaRelocation package- ...to a force of 20 pounds Bend at the waist with some twisting up to one hour a shift Grasp, reach and manipulate objects with hands. This handwork requires eye-hand coordination, and may require climbing a ladder to store and retrieve materials or place and remove...Weekly payTemporary workLocal areaFlexible hoursShift work
$19 - $24 per hour
...company safety and security protocols. Qualifications: Minimum of 2 years of maintenance or related experience. Proficiency with hand and power tools. Strong problem-solving and time-management skills. Ability to work independently with minimal supervision....Hourly pay- ...correct monetary changes. Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed. Ability to enter orders using a computer keyboard or touch...Shift workNight shiftWeekend work
- ...correct monetary changes. Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed. Ability to enter orders using a computer keyboard or touch...Shift workWeekend work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Derrick Hand. Be the first to apply!




