Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Repair and Tool Technician

The Home Depot

Repair And Tool Technician | Home DepotPosition Purpose: Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained. Technicians work in both our stores with Tool Rental Centers and in our repair centers. In a store, technicians will be expected to provide service to store customers in Tool Rental which includes writing customer contracts and invoices for equipment rental and tool repairs, checking to make sure tool is operating properly and demonstrating its proper use (as needed). In addition to supporting customer repair needs, they are also responsible for the day-to-day operation and maintenance of equipment in the tool rental department. In non-store locations, technicians will ensure units are repaired, tested for the quality of the repair and cleaned prior to returning to the store where the repair originated. Technicians must have a thorough knowledge of all tools and must effectively manage the tool inventory by maintaining the tools and repairing them as necessary.

Vacancy posted 2 days ago
Similar jobs that could be interesting for youBased on the Repair and Tool Technician in Somerville, MA vacancy
  •  ...Repair and Tool Technician | Home Depot Position Purpose: Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures... 
    Suggested
    Remote work

    Home Depot

    Waltham, MA
    1 day ago
  • $60k - $110k

     ...opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly...  ...you deserve. Automotive Wheel Technician – No Experience Needed!    Training:...  ...vehicles  ~ Use grinding and sanding tools to repair cosmetic damages (curb and road... 
    Suggested
    Hourly pay
    Traineeship

    Dent Wizard International

    Boston, MA
    20 days ago
  • $22 - $35 per hour

     ...procedures Enter and run pre-programmed G-code programs Make offset wear and geometry adjustments at the machine Change collets, tool inserts, tool blocks, and tool holders Maintain coolant and oil levels Perform in-process quality checks using precision... 
    Suggested
    Hourly pay
    Full time
    Local area
    Relocation
    Shift work
    Day shift

    United Electric Controls

    Watertown, MA
    3 days ago
  • $38.46 - $62.5 per hour

     ...property.Position SummaryThe Licensed Fire Sprinkler Technician is responsible for inspecting, testing, servicing, and repairing commercial and industrial fire sprinkler...  ...and personal growth. We provide the resources, tools, and training you need to build a long-term career... 
    Suggested
    Hourly pay
    Work at office
    Flexible hours

    Fire Equipment Inc

    Medford, MA
    3 days ago
  •  ...Company’s blanking process, including setting up, maintaining tooling, programming, troubleshooting, general process improvement, and...  ...instructions. # Perform routine machine maintenance and minor repairs to ensure optimal performance. # Monitor production runs for... 
    Suggested
    Work at office

    BOSTON CENTERLESS LLC

    Woburn, MA
    4 days ago
  • $27 - $33 per hour

     ...and perform basic troubleshooting when needed Read and interpret blueprints and engineering drawings Use precision measuring tools such as micrometers, calipers, and gauges Maintain quality and safety standards throughout the production process Qualifications... 
    Hourly pay
    Temporary work
    Local area
    Monday to Friday
    Day shift
    Afternoon shift

    Adecco

    Watertown, MA
    19 days ago
  • $800 per month

     ...Description Job Description PEP BOYS / Mavis Tire - Automotive Tire Technicians Start Strong with Pep Boys & Mavis: Eligible Automotive...  ...Technicians to join Team Mavis at our automotive service, repair, and tire sales centers in the Everett, MA area . NO... 
    Hourly pay
    Weekly pay
    Full time
    Immediate start

    Mavis Tire Supply

    Chelsea, MA
    22 days ago
  •  ...Mavis Tires & Brakes at Discount Prices - Automotive Alignment Technicians Put your career into high gear with Mavis Tires & Brakes...  ...Team Mavis at one of our state-of-the-art automotive service, repair and tire sales centers in the Everett, MA area. With over 4,... 
    Weekly pay
    Full time
    Immediate start

    Mavis Tire Supply

    Everett, MA
    13 days ago
  •  ...using SolidWorks Conduct troubleshooting, adjustments, and minor repairs to maintain machine performance Support plastics injection...  ...design interpretation Skilled in using precision measuring tools such as bore gauges, calipers, and micrometers Excellent problem... 

    Talnt

    Billerica, MA
    9 days ago
  •  ...machines to produce high-quality precision aerospace components without supervision. Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machine. Able to read operation sheets and blueprints. Experience with large diameter... 
    Full time
    Night shift

    Enjet Aero, LLC

    Malden, MA
    17 days ago
  • $28 - $34 per hour

     ...and perform basic troubleshooting when needed Read and interpret blueprints and engineering drawings Use precision measuring tools such as micrometers, calipers, and gauges Maintain quality and safety standards throughout the production process Qualifications... 
    Hourly pay
    Temporary work
    Local area
    Shift work

    Adecco

    Arlington Heights, MA
    14 days ago
  • $18 - $26 per hour

    Adecco Staffing is working with a company in Ayer, MA to bring on a Machinist! This is a full time position. Location: Acton, MA Pay Range: $18–$26 per hour (Based on experience) Shift: 1 st shift Job Summary: We are currently seeking a CNC Operator to...
    Hourly pay
    Permanent employment
    Full time
    Temporary work
    Local area
    Shift work

    Adecco

    Arlington Heights, MA
    9 days ago
  •  ...including progressive machining of a variety of parts and different metals where very close tolerances must be maintained. Change dull tooling, and/or make minor offsets and adjustments as needed for tooling wear. Ensure product quality is achieved by working to operator... 
    Contract work
    Apprenticeship
    Night shift
    Afternoon shift

    Tecomet

    Charlestown, MA
    1 day ago
  •  ...specified tolerances following work instructions and in accordance with machine programs and engineering drawings. Change dull tooling, and/or make minor offsets and adjustments as needed for tooling wear.  Ensure product quality is achieved by working to operator... 
    Contract work
    Apprenticeship

    Tecomet

    Arlington, MA
    5 days ago
  • $27.5 - $38.5 per hour

     ...Interact with Design, Cost, and Process Engineering team members as needed • Inspect and evaluate equipment and product through various tools, calipers, and measurement devices. • Follow proper documentation and reporting standards to ensure data is recorded and escalated... 
    Permanent employment
    Temporary work
    For contractors
    Work at office

    Parker Hannifin Corporation

    Winchester, MA
    4 days ago
  •  ...and unloading fixtures, work pieces, and tooling. Machinists must be competent in G-code...  ...company approved vendors. Schedule Machine Repair when needed Assist Lathe Operators in...  ...and discussions Mentor and educate technicians and engineers on manufacturing best... 
    Flexible hours

    Mide Technology

    Woburn, MA
    2 days ago
  •  ...follow quality procedures and coordinate any issues through the appropriate department. Essential Responsibilities: Perform tooling setup per work instructions Load / unload parts onto fixtures and operate 5-axis laser machine Inspect completed parts using... 
    Full time

    Enjet Aero, LLC

    Malden, MA
    17 days ago
  • $20 per hour

     .../C processes for development hardware (i.e. machining programs tooling) as well as 4 and 5 axis N/C processes Develop CMM programs...  ...Desired Characteristics Relevant hands-on experience (mechanical repair construction etc.) Excellent communication and interpersonal... 
    Permanent employment
    Full time
    Internship
    Relocation
    Visa sponsorship
    Work visa
    Relocation package

    GE Aerospace

    Lynn, MA
    4 days ago
  • $800 per month

     ...Start Strong with Mavis: Eligible Automotive Tire Technicians receive weekly bonuses up to $800. Mavis Tires & Brakes at Discount...  ...locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. Mavis offers eligible... 
    Hourly pay
    Weekly pay
    Immediate start

    Mavis Tire Supply

    Everett, MA
    2 days ago
  • New England Territory Sales Manager Business Development & Customer Service to further expand our brand, products & services in the Northeast. Four months Prior to working for Aries, I was an Account Executive for New England based Triumph Modular for 3 years ...
    Afternoon shift

    Aries Buildings

    Boston, MA
    6 days ago
  • $800 per month

     ...Description Start Strong with Mavis: Eligible Automotive Tire Technicians receive weekly bonuses up to $800. Mavis Tires & Brakes at...  ...locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. Mavis offers eligible... 
    Hourly pay
    Weekly pay
    Immediate start

    Mavis Tire Supply

    Cambridge, MA
    13 days ago
  •  ...Mavis Tires & Brakes At Discount Prices - Automotive Alignment Technicians Put your career into high gear with Mavis Tires & Brakes at...  ...Team Mavis at one of our state-of-the-art automotive service, repair and tire sales centers in the Everett, MA area. With over 4,00... 
    Weekly pay
    Full time

    Mavis Tire

    Everett, MA
    3 days ago
  •  ...orthopedic, medical device, and aerospace components. In this role, you will set up and operate CNC equipment, interpret blueprints, load tools and fixtures, and monitor machining operations to meet tight tolerances. You will inspect parts using precision measuring tools,... 
    Full time

    TECOMET

    Cambridge, MA
    4 days ago
  •  ...complex CNC equipment to produce high-precision medical and aerospace components. You’ll interpret blueprints and CAD models, select tooling and fixtures, and perform in‑process inspections using precision measuring instruments to ensure tight tolerances and regulatory... 
    Full time

    TECOMET

    Arlington, MA
    4 days ago
  • $22 - $35 per hour

    United Electric Controls in Watertown, Massachusetts is looking for full-time CNC Operators. In this role, you'll set up and operate various CNC machines, perform quality inspections, and ensure a safe working environment. The position requires experience depending on the...
    Hourly pay
    Full time

    United Electric Controls

    Watertown, MA
    3 days ago
  • Pursuit Aerospace, a global aerospace manufacturer, seeks an Entry-Level CNC Machine Operator in Malden, MA, for 1st shift. The role focuses on operating CNC lathes/mills, ensuring aerospace parts meet blueprints, and collaborating with engineers on adjustments. It offers...
    Day shift

    Pursuit Aerospace

    Malden, MA
    3 days ago
  •  ...within specified tolerances following work instructions and in accordance with machine programs and engineering drawings. Change dull tooling, and/or make minor offsets and adjustments as needed for tooling wear. Ensure product quality is achieved by working to operator... 
    Contract work

    TECOMET

    West Medford, MA
    3 days ago
  • $28 - $38 per hour

     ...machine in a cellular environment is required. Demonstrates a working knowledge of feeds and speeds and a working knowledge of cutting tools and their application. Inspects work for all dimensional features as required. Produces quality and quantity of work in accordance... 
    Hourly pay
    Full time
    Local area
    Relocation package
    Flexible hours
    Shift work
    Afternoon shift

    Pursuit Aerospace

    Malden, MA
    6 days ago
  •  .... You will produce machined parts, maintain quality records, and ensure adherence to safety and GMP/GDP standards. You will handle tooling changes, minor offsets, and routine PM tasks while meeting productivity targets. Strong math, measurement, and communication skills... 
    Night shift
    Afternoon shift

    TECOMET

    Arlington, MA
    3 days ago
  • Tecomet in Somerville, MA is seeking a CNC Machinist I to produce precision parts using CNC machines, ensuring quality and safety while following GMP/GDP and lean practices. The role emphasizes accuracy, documentation, and teamwork in a fast-paced manufacturing environment...

    TECOMET

    Somerville, MA
    3 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Repair and Tool Technician. Be the first to apply!