Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

CNC Programmer

$45 - $50 per hour

Complete Staffing LLC

Job Description

Job Description

CNC Programmer

Location: Port Arthur, TX

Department: Machine Shop / Operations

Employment Type: Full-Time

Schedule: Day shift; typically 45 hours per week

Estimated Pay Range: $45–$50 per hour, pending final confirmation and based on experience

Position Summary

CS Industrial is seeking an experienced CNC Programmer for a client’s machine shop operations in Port Arthur, Texas. This position owns CNC programming, machining method development, setup support, and the controlled release of accurate programs to the shop floor.

The CNC Programmer translates engineering drawings, models, reverse-engineered component data, repair requirements, and production priorities into safe, efficient, and repeatable machining processes that support quality, throughput, and on-time delivery.

This is primarily a programming position, with programs created on a laptop using CAM software. Interaction with machinists at the machine will be required to support setups, program prove-out, troubleshooting, and process adjustments.

Key Responsibilities

CNC Programming and Process Development

• Create, modify, and maintain CNC programs for production components, repair work, and assigned machining operations.

• Review drawings, models, reverse-engineering data, specifications, tolerances, materials, and work orders before developing or releasing programs.

• Develop machining strategies, toolpaths, tooling selections, fixture requirements, feeds and speeds, setup sheets, and program instructions.

• Prepare and verify tooling requirements to confirm the correct tools are available for each job.

• Apply expert GD&T knowledge to programming, machining methods, and inspection requirements.

• Review inspection reports and modify programs or machining processes as needed to achieve required dimensions and tolerances.

• Identify opportunities to reduce cycle time, scrap, rework, setup delays, and machining variation while maintaining quality and safety.

Setup and Machining Support

• Support CNC machinists during setup, first-piece prove-out, and troubleshooting.

• Assist with offsets, tooling questions, program corrections, and process adjustments.

• Provide clear expectations for machine selection, setup, tooling, critical tolerances, and first-piece inspection.

• Collaborate with Engineering, Reverse Engineering, Quality, Planning, and shop leadership to resolve drawing, material, tolerance, and manufacturability concerns.

• Escalate missing information, tooling gaps, fixture issues, and other machining risks before work is released to the floor.

Program Control and Documentation

• Maintain controlled program files, revision history, setup documentation, and programming standards to prevent outdated or incorrect program use.

• Confirm programs, setup sheets, tooling requirements, fixture notes, inspection checkpoints, and revision information are complete before release.

• Release approved programs and supporting documentation to CNC machinists or shop leadership.

• Document programming changes, recurring setup issues, and process lessons learned to support training and future repeatability.

Communication and Coordination

• Communicate programming status, program readiness, setup support needs, and machining-method questions.

• Keep shop leadership, machinists, Engineering, Reverse Engineering, Quality, and Planning informed of issues that may affect quality, scheduling, or on-time delivery.

• Provide clear visibility into program completion, prove-out requirements, and recurring programming or setup concerns.

Equipment, Software, and Components

CAM Software: GibbsCAM, Inventor CAM, and Mastercam

Machine Controls: FANUC and CELOS, with some conversational programming

Typical components include:

• Impellers and rings

• Pump cases and heads

• Shafts, as required

Materials include cast iron, carbon steel, stainless steel, Monel, Inconel, brass, bronze, and related alloys.

Required Qualifications

• Minimum of five years of CNC programming experience.

• Strong CAM programming skills, including creating programs from scratch and modifying existing programs.

• Expert knowledge of GD&T and the ability to interpret complex drawings, tolerances, models, and inspection requirements.

• Strong understanding of machining strategies, toolpath development, tooling selection, offsets, feeds and speeds, and setup documentation.

• Ability to interpret reverse-engineering data, material requirements, and repair scopes.

• Working knowledge of machine shop workflows, work orders, routings, quality controls, first-piece prove-out, and program revision control.

• Ability to review inspection results and make appropriate programming or process corrections.

• Strong troubleshooting, organization, documentation, and communication skills.

• Ability to collaborate effectively with machinists, engineering teams, quality personnel, planners, and shop leadership.

Preferred Qualifications

• Experience programming pump components and rotating equipment.

• Experience with GibbsCAM, Inventor CAM, and/or Mastercam.

• Familiarity with FANUC and CELOS controls and conversational programming.

• Experience supporting machining of the components and materials listed above.

• Practical machining and setup knowledge that supports program development, prove-out, and troubleshooting.

Schedule and Safety Requirements

• Day-shift schedule, typically 45 hours per week.

• Steel-toe boots are required.

• Company-provided safety glasses must be worn in designated work areas.

• Follow all machine shop safety procedures and work practices.

Compensation and Benefits

• Estimated compensation of $45–$50 per hour, subject to final confirmation and candidate qualifications.

• Employee benefits as outlined in the company’s 2026 Benefits Guide.

• Eligibility to participate in the company’s 401(k) after six months of full-time employment, with a company match of up to 6% and immediate vesting.

Interview Process

Candidates are encouraged to provide nonconfidential examples of their CNC programming work. The interview process may include a request to write a simple program using the company’s software to demonstrate programming proficiency.

Vacancy posted 24 days ago
Similar jobs that could be interesting for youBased on the CNC Programmer in Port Arthur, TX vacancy
  •  ...CNC ProgrammerThe CNC Programmer owns CNC programming, setup support, machining method development, and controlled release of accurate programs to the machine shop. This role helps convert drawings, reverse-engineered components, repair requirements, and production priorities... 
    Suggested
    Apprenticeship
    Local area
    Flexible hours

    KSB SE & Co. KGaA

    Port Arthur, TX
    23 hours ago
  • $45 - $50 per hour

     ...CNC Programmer Location: Port Arthur, TX Department: Machine Shop / Operations Employment Type: Full-Time Schedule: Day shift; typically 45 hours per week Estimated Pay Range: $45–$50 per hour, pending final confirmation and based on experience Position... 
    Suggested
    Hourly pay
    Full time
    Immediate start
    Day shift

    Complete Staffing Inc

    Port Arthur, TX
    1 day ago
  •  ...CNC Programmer Location: Port Arthur, TX Department: Machine Shop / Operations Reports To: Operations Manager Classification: Non-Exempt Schedule: Day shift; typically 45 hours per week Position Summary Complete Staffing is seeking an experienced CNC Programmer for a... 
    Suggested
    Day shift

    Complete Staffing Inc

    Nederland, TX
    1 day ago
  • $40 - $50 per hour

     ...~ Direct hire employee POSITION SUMMARY: The Foreman position will supervise and lead a crew's daily assignments in CNC machining and fabrication of products. Responsible for scheduling, efficiency in operations, and safety. RESPONSIBILITIES:... 
    Suggested
    Temporary work
    Work experience placement
    Shift work
    Rotating shift
    Day shift

    Elevate Human Capital

    Port Arthur, TX
    3 days ago
  •  ...CNC Machinist - Programmer / Operator Join our team at our climate-controlled Port Arthur facility and play a critical role in producing precision-machined components. We are seeking an experienced CNC Machinist (Programmer/Operator) who can set up, program, edit,... 
    Suggested

    Smiths Group plc

    Port Arthur, TX
    1 day ago
  • $24 - $36 per hour

    MachinistAs a Machinist, you'll operate a variety of shop equipment, with a primary focus on Vertical Turning Lathes (VTL)— including conventional lathes, milling machines, horizontal mills, drills, borers, and grinders.Responsibilities:Calculate dimensions & tolerances...
    Apprenticeship
    Local area
    Flexible hours

    KSB SE & Co. KGaA

    Port Arthur, TX
    23 hours ago
  •  ...Advanced Machining & Repair Technician Advanced Machining & Repair Set up and operate manual and/or CNC equipment (lathes, mills, boring mills, grinders, etc.) to machine, repair, or recondition pump parts and industrial components. Interpret engineering drawings... 
    Apprenticeship
    Local area
    Flexible hours

    KSB SE & Co. KGaA

    Port Arthur, TX
    13 hours ago
  • Job TitleProvides maintenance services, in installation, repairs and inspections of all boiler components along with working the towers and exchangers in industrial plants and/or industrial settings to keep them in good working order.Position Responsibilities• Assembles...
    Long distance
    Flexible hours

    Zachry Group

    Port Arthur, TX
    4 days ago
  •  ...experience in the field or teaching experience Expertise in operating and maintaining machine tools (lathes, mills, grinders, etc.), CNC machines, and understanding safety practices Work independently in the classroom Proficient in Microsoft Word, Excel,... 
    Work experience placement
    Afternoon shift

    Lamar State College-Port Arthur

    Port Arthur, TX
    3 days ago
  •  ...Job Description Job Description EHC is looking for a CNC Programmer for a Client in the Port Arthur Texas Area Position Summary The CNC Programmer owns CNC programming, setup support, machining method development, and controlled release of accurate programs... 

    Elevate Human Capital

    Port Arthur, TX
    20 days ago
  • Job Description Job Description Job Title: Senior Production Engineer Location: Port Arthur, TX Type: Direct Hire Work Model: Onsite – onsite Responsibilities • Oversee operation of distillation projects and hydrogenation reactors. • Serve as a technical ...
    Work experience placement
    Local area
    Trial period
    Shift work

    System One

    Port Arthur, TX
    25 days ago
  • Come work with us! Savage has been designated by USA Today as a Top Workplace and also received recognition as a Military Friendly Employer and a Top Company for Women to Work For in Transportation. Military Veterans and Reservists are encouraged to Operator, Manufacturing...

    Savage Companies

    Port Arthur, TX
    2 days ago
  • Machine Operator IMachine Operator I is responsible for the set up and operation of a production machine in accordance with established procedures and guidelines. Secures and maintains material and supplies required on the operation.Principle Duties and ResponsibilitiesCompletes...
    Shift work

    UFP Industries

    Port Arthur, TX
    23 hours ago
  • Job Description Job Description Job Title: Production Engineer Location: Port Arthur, TX Type: Direct Hire Requirements Required Bachelor's Degree in Chemical Engineering or Bachelor's Degree in Chemistry with plant production experience Required 5+ years...
    Work experience placement
    Local area
    Shift work

    System One

    Port Arthur, TX
    4 days ago
  • The successful Equipment Operator candidate will safely perform the basic tasks required to load, unload and move petroleum coke at the PABTEX Facility and Terminal located in Port Arthur, TX. These are just a few of the benefits you can expect from working with Savage...
    Night shift
    Rotating shift
    Day shift

    Savage Services

    Port Arthur, TX
    23 hours ago
  • Crane OperatorBo-Mac Contractors, Ltd. in the Texas/Louisiana Gulf Coast area is offering challenging and exciting career opportunities for NCCCO Crane Operators. You will be responsible for the safe and efficient operation of mobile and fixed cranes on marine and civil...
    For contractors

    Bo-Mac Contractors, LTD

    Port Arthur, TX
    3 days ago
  • Waffle House Cook PositionAt Waffle House, we are not in the food business. We are in the People Business and we are hiring immediately for full time and part time cooks (all shifts). Being in the People Business, we don't just take care of our customers. We take care ...
    Weekly pay
    Full time
    Part time
    Immediate start
    All shifts
    Night shift
    Weekend work
    Day shift

    Waffle House

    Port Arthur, TX
    1 day ago
  • $31.44 per hour

    Job Posting Location 3901 Coke Dock Rd, Port Arthur, TX, 77640, United States Base Pay $31.44 / Hour Job Category Calc PA - Salaried Non-Exempt Employee Type Non-Exempt Required Degree High school Contact information Name Bridget Soden Description...

    Oxbow

    Port Arthur, TX
    4 days ago
  • Terminal Operator The Terminal Operator is responsible for the safe and efficient transfer, storage, and handling of liquid products including chemicals, petroleum, and renewable products within terminal operations. This role supports activities involving marine vessels...
    Remote work
    Shift work

    Howard Energy Partners

    Port Arthur, TX
    4 days ago
  • Operator Forklift Greater Than 10k Journeyman A Over 10,000 lbs NCCER Certified minimum 12 months experience. Journeyman B Over 10,000 lbs CTS, or other recognized certification, with minimum 12 months experience. Bechtel Construction Services

    Bechtel Construction Services

    Port Arthur, TX
    1 day ago
  • Job Description Position Responsibilities: Observes load hook-up and determines safety of load. Manipulates crane control to regulate speed and direction of crane and hoist movement according to written, verbal, or signal instructions. Cleans and maintains ...
    Long distance
    Flexible hours

    Zachry Group

    Port Arthur, TX
    1 day ago
  • Job Details Job Location: Port Arthur, TX 77642 Job Summary Our Facility Service Operators perform a variety of duties at refinery and terminal customer locations including connecting/disconnect tanker trucks, rail cars, cargo ships or barges for loading or unloading liquid...
    Work at office

    AccuTRANS Inc.

    Port Arthur, TX
    3 days ago
  • $140k - $165k

    Job Description Job Description This job is posted on behalf of Solstice Consulting Group by Top Echelon. Solstice Consulting Group is seeking a Senior Production Engineer for our chemical manufacturing client. This is an in-office position located in the Beaumont...
    Work at office
    Relocation package

    Solstice Consulting Group

    Port Arthur, TX
    11 days ago
  • Instrument Fitter Instrument Fitter | Instrument Tubing Fitter | Tube Fitter | Instrumentation | Tubing Installation | E&I Construction Who We Are For over 35 years, ISC has delivered safe, high-quality engineering, construction, and maintenance solutions across...

    ISC CONSTRUCTORS, LLC

    Port Arthur, TX
    2 days ago
  • Overview At Technical Environmental Services, Inc. (TES), our mission is to protect people and the environment by helping employees retire healthy. For more than 40 years, TES has supported industrial, commercial, institutional, and public-sector clients with technically...
    Full time
    Day shift

    Technical Environmental Services

    Port Arthur, TX
    23 hours ago
  • Beaumont TX TS Office Port Arthur, TX 77640, USA Description Total Safety is looking for a Fire Technician II to join their safety conscious team! The Fire Technician II provides service inspection, testing, maintenance, and repair for fire equipment which...
    Work at office
    Local area

    Total Safety

    Port Arthur, TX
    3 days ago
  • -The industrial cooling tower carpenter is responsible for completing carpentry work on industrial cooling towers as required during construction and/or maintenance projects. Individuals should be capable of completing the following: Performing General Physical Activities...
    Local area
    Immediate start
    Flexible hours

    Brown & Root

    Port Arthur, TX
    1 day ago
  • Stevast Techniek in Nederland zoekt een CNC-programmeur om de productie soepel en efficiënt te laten draaien. De rol omvat programmeren van lasersnijmachines en robotbuigcellen, optimaliseren van processen en coördineren van productie. Je krijgt goede arbeidsvoorwaarden... 
    Contract work

    Stevast Techniek

    Nederland, TX
    13 hours ago
  • Description Founded in 2002, the ITEX Group is a privately held real estate investment firm offering expertise in property asset services, property investment, property development, consulting services, and property management. The ITEX Group pursues a broad range of real...
    For subcontractor
    Seasonal work
    Local area

    ITEX Group

    Port Arthur, TX
    3 days ago
  • $24 - $27.5 per hour

    Job Title Construct, repair, and install building frameworks and structures made from wood and other materials. Job Description Construct, repair, and install building frameworks and structures made from wood and other materials. Constructs or repairs materials...

    FD.io

    Port Arthur, TX
    4 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to CNC Programmer. Be the first to apply!