CNC Machine Operator
$27 - $30 per hourAutomation Personnel Services Inc
Job Description
Job Description
CNC Machine Operator
Automation Personnel Services is looking for a Dedicated CNC Machine Operator for a company based in Dallas, Texas. The CNC Machine Operator will be responsible for running a variety of CNC machines and help enhance the productivity of our organization. Will perform work quality checks and monitor machine output each hour and generate comprehensive reports for management.
Pay Rate:
$27.00 to $30.00 Hour
Schedule and Hours:
Monday to Friday
6am to 2:30pm with 30minute Break
CNC Machine Operator Duties and Responsibilities:
- Translate the requirements of detailed part drawings into measurements for production
- Perform proper set-up and calibration procedures for all equipment and accessories to be used on projects
- Prepare and operate CNC machines to perform tasks such as drilling, grinding, milling etc.
- Prepare a test run to check if the machines produce outputs according to specifications
- Ensure that every machine procedure is done in accordance with the strict guidelines of the company
- Follow all company safety protocol
- Inspect the work area and machines that were used during the day prior to leaving at the end of each shift
- Inspect and measure finished products and compare them with requirements to determine if the process has been completed properly
- Attend and actively participate in training classes and safety sessions
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
While performing the duties of this job, the employee is regularly required to stand; use hands and finger to handle objects, or controls; reach with hand and arms. The employee frequently is required to walk and stand. The employee is occasionally required to stop, kneel or crouch. The employee must be able to stand and bend for up to ten hours. The employee must regularly lift a/o move up to 10 lbs., frequently lift a/o move up to 25 lbs., and occasionally lift a/o move up to 30+ lbs.
CNC Machine Operator Requirements and Qualifications:
- 2+ years’ experience working for a manufacturing business
- Ability to lift up to 30+ lbs.
- Extensive knowledge of machine and operation required.
- Mechanical aptitude and strong basic math skills
- Proven history of working with gauges and calipers as CNC Operator
- Actions are normally determined by specific instructions from the supervisor or by following well-defined procedures, methods, and practices.
Job Type
Full-time, Temporary
Benefits
• Weekly Pay
• Medical, dental, vision, short-term disability and life insurance
• 40 Hours Service Bonus after 1 year of continuous service and 1500 hours
• 6 paid Holidays after 1 year of continuous service and 1500 hours
401(k) Retirement Plan
Automation Personnel Services is the only staffing agency specializing in manufacturing and industrial roles that offers 401(k) matching to all eligible contingent and temporary associates.
Click Apply Now to submit your application or call us
- ...We are seeking an experienced CNC Set Up Operator to join our CNC Programming Team in Richardson, TX. The ideal candidate will have hands-on... ...setting up and operating Horizontal, Vertical, and 5-Axis CNC machines. In this role, you will work closely with CNC Programmers to...SuggestedContract workShift workNight shiftDay shiftAfternoon shift
$500 per month
...CNC Machine OperatorEmployee-Owned Premier Countertop Company is looking for a CNC Machine Operator for our growing company in Syracuse. Full-time, Monday through Friday, year-round position with occasional overtime and room for growth!JOB SUMMARY:Set up and operate machines...SuggestedFull timeMonday to Friday$18.16 per hour
...Description Job Title: CNC Operator - 3rd Shift Location: On-Site, Grand Prairie, TX Employment Type: Temp to Direct... ...producing high-quality precision components using advanced CNC machining equipment. This opportunity offers hands-on experience in a fast...SuggestedHourly payPermanent employmentTemporary workWorldwideMonday to FridayShift workNight shift- ...Machine Operator QXO, Inc. (NYSE: QXO) is the largest publicly traded distributor of roofing, waterproofing, and related products, and the... ...fabrication, or production equipment preferred Experience with CNC equipment, door machining equipment, saws, routers, drills, or...SuggestedSeasonal workShift work
$25 per hour
...Full-Time Shift: Day Shift Experience: 5+ years of CNC machining experience Applications close October 2, 2026 — please apply... ...not repetitive production machining. J & S Plating and Repair operates an FAA Part 145 repair station in Grand Prairie, where setups...SuggestedBi-weekly payHourly payFull timeShift workDay shift- ...Dallas, TX Pay: Competitive (DOE) + Weekly Pay + Company Bonuses Job Type: Full-Time Experience: 2+ Years CNC Programming | 4+ Years CNC Machining Machines: CNC Mills • CNC Lathes • Precision Machining Equipment CAM Software: Mastercam • Vericut (or...Weekly payFull timeTemporary workFlexible hours
- Job Description Job Description Ability to setup cnc mills and or cnc lathes. Must have own tools. Working hours 6am to 2:35pm. Familiar with Haas and Fanuc controlls.
- Job Description Job Description CNC Machinist minimum 5 years exp. 5axis Mill exp. Fanuc control
$90k
...CNC Programmer – East Syracuse, NY Join a well-established manufacturer as a CNC Programmer, where you will play a key role in developing and optimizing CNC programs for machining aluminum castings and billets. This position offers a blend of technical programming...- ...Job Description Job Description The CNC Machinist operates Mazak CNC mills and lathes to produce prototype and custom steel parts. Working within a machining team and reporting to the shop supervisor, this role programs and operates equipment, verifies precision, maintains...
$34 - $40 per hour
...Haas Cnc Machinist Cnc Machinist – Haas Mills & Lathes Location: Dallas, TX Pay: $... ...a skilled Cnc Machinist with experience operating and setting up both Haas Mills and Haas Lathes... ...up and operate Haas Cnc Mills and Lathes Machine precision components from blueprints,...Hourly payFull timeMonday to Friday$35 - $40 per hour
...NO C2C CNC ProgrammerLocation: Syracuse, NY AreaEmployment Type: Full Time | Direct HireCompensation: $35 to $40/hour, with flexibility... ...develop programs, interpret technical drawings, and support machining operations in a collaborative manufacturing environment.Key...Hourly payFull timeRelocation packageDay shift- CNC OperatorResponsible for running a variety of CNC machines and help enhance the productivity of our organization. Will perform work quality checks and monitor... ...up to 30+ lbs.Extensive knowledge of machine and operation required.Mechanical aptitude and strong basic...Work visa
$24 - $35 per hour
...Job Position: CNC Machinist Location: Dallas, TX 75347 Shift: Days Description... ...(Day to day functions): • Set-up machines to produce in conformance parts to existing... ...starts after minor stoppages. • Performs operator PM of machinery including required lubrication...Local areaFlexible hoursShift work$31.25 - $45.67 per day
...CNC Programmer – Day ShiftPay: $31.25–$45.67/hourLocation: Syracuse, NYShift: Monday–... ...software.Interpret blueprints and determine machining strategies, tooling, feeds, and speeds.... ...documentation and provide guidance to machine operators.What We're Looking For3+ years of CNC...Monday to Friday$27 - $36 per hour
...Job Description Job Description CNC Machinist 1 – First Shift Location: East Syracuse, NY Pay Rate: $... ...are seeking an experienced CNC Machinist 1 to set up and operate horizontal and vertical CNC machining centers to produce precision-machined components. The...Shift workDay shift$25 - $33 per hour
...Now hiring for a CNC Machinist - Direct Hire Location: Denton, TX Pay... ...opportunity lets you program, set up, and operate CNC equipment to manufacture high-quality... ...trade school, or vocational training in Machining Technology preferred. Ability to read...Hourly payImmediate startMonday to FridayShift workNight shiftAfternoon shift- ...CNC Programmer II at Bluefors, Syracuse, United States, US. A mid-level full time position... ...CNC Programmer II to join our growing Machine Shop team. Do you have strong experience... ...programs and supporting complex machining operations? Are you comfortable working with...Full time
- ...CNC Machinist (2nd Shift) Produces machined parts by setting up and operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. Responsibilities: Setup and operation...Permanent employmentApprenticeshipWeekend workAfternoon shift
$30 per hour
...Job Description Job Description Luxor Staffing is hiring a CNC Operator paying up to $30 per hour with 1st shift available. Weekly pay... ...accessories to be used on projects Prepare and operate CNC machines to perform tasks such as drilling, grinding, milling etc....Hourly payWeekly payMonday to FridayShift workDay shift- ...ask for an accommodation or an alternative application process. CNC Operator Full Time Technical Dallas, TX, US 2 days ago Requisition ID:... ...awaits! Summary: Responsible for running a variety of CNC machines and help enhance the productivity of our organization. Will perform...Full timeContract workWork at officeWork visaShift work
$75k - $95k
...Job Title: CNC Mill Machinist Job Description We are seeking a skilled CNC Mill Machinist with expertise in 5-axis machining to lead the commissioning, setup, and day-to-day operations of large-format 5-axis mill/turn machines. Responsibilities Lead...Weekly payPermanent employment- ...0 countries. Job Description Responsibilities: Setup and operation of Fanuc & HAAS CNC milling centers using Master CAM software. Utilize blueprints... ...Knowledge, Skills and Abilities: 3-7 years of manual machining and CNC setup and operation utilizing conversational programming...Permanent employmentApprenticeshipWeekend workAfternoon shift
- ...TITLE: Setter GENERAL DESCRIPTION : Set up machines per specified requirements to assure quality... ...improvement and safety. Coilers/wire formers (CNC programming) for existing parts. Ensure all machines / operations are running smoothly, promptly and at highest quality...Full timeMonday to FridayNight shiftDay shiftAfternoon shift
$19.25 - $23.07 per hour
...CNC Operator IWe are looking for a CNC Machine Operator to join our manufacturing team at Bluefors in Syracuse, NY. In this role, you will support the production of precision components used in advanced cryogenic systems that power breakthroughs in quantum technology,...Temporary workFlexible hours- ...A leading aerospace and defense company in Addison, TX, is seeking a skilled CNC Machinist for their R&D team. You will operate and set up CNC machines, read engineering drawings, and ensure quality assurance in rocket motor component fabrication. The role requires 5-...
- ...as an FSE for Houston area Methods Machine Tools, Inc. supplies high-quality, high-precision... ...Headquartered in Sudbury, Mass., and in operation since 1958, Methods provides an end-to-... ...to diagnose, repair, and maintain CNC milling and turning machines at customer...Work at office
$75k - $93.6k
CNC Programmer II (1st Shift)This hourly CNC Programmer II role focuses on programming, setting up, and operating CNC milling centers to produce high-precision components that consistently... ...and mentorship. You will be part of a machine shop team that prioritizes safety,...Hourly payPermanent employmentTemporary workApprenticeshipCasual workWork at officeMonday to FridayDay shift$32 - $40 per hour
...defense and we know aircraft systems. The CNC Machinist III is a senior technical... ...responsible for complex setups, precision operations, and mentoring Level I and Level II... ...practices. Edits/offsets programs at the machines, to diagnose and resolve complex mechanical...Hourly payWeekend work$19 - $21 per hour
...Job Description Job Description CNC Machine Operator Pay: $19.00-$21.00/hour depending on experience Hours: 6:30am - 3:00pm Staffworks is seeking a reliable CNC Machine Operator to join their award-winning team! What's in it for you? Temp to Hire...Temporary workWork experience placement
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to CNC Machine Operator. Be the first to apply!




