Instrumentation & Controls Technician
City of Lewisville
Provides routine maintenance support for both Water and Wastewater Plants, including pump and lift stations and other areas within the distribution and collection. Performs assigned duties necessary to repair, replace, and maintain mechanical, electronic, control and instrumentation equipment related to water and wastewater treatment facilities; including Supervisory Control and Data Acquisition (SCADA) systems. Management reserves the right to add, modify, change, or rescind the work assignments of different positions and to make reasonable accommodation so that qualified employees can perform the essential functions of the job. Responsibilities Assists in the operation and maintenance of SCADA/Instrumentation/small electrical at both water and wastewater plants, such as small electrical systems, motor starters, electric motors, pump control circuits, level controls, automation control circuits, instrumentation equipment, motorized valve operators, SCADA, and relays. Assists maintenance personnel in performing preventive maintenance on electric motors, pumps, replacing bearings, cleaning stators, and greasing; performs maintenance on other related electrical equipment for motors. Inspects, repairs, troubleshoots and performs routine preventive maintenance on all variable frequency drive units in the water and wastewater system. Service hydraulic, electric, pneumatic, and mechanical instruments used for controlling, analyzing, measuring, and recording. Uses process flow sheets, instrument system diagrams, single‑line electrical drawings, and schematics. Helps coordinate maintenance activities with operations personnel, enters data into computerized maintenance management software (CMMS) system, and writes reports. Performs all other related duties as assigned. Education High School Diploma or GED. Graduation from an Electronics Trade School is preferred. Experience 3 years of experience in the operation and maintenance of electronic communications, control equipment, and/or SCADA software programming. Experience with radio frequency communications, process instrumentation and SCADA systems in a manufacturing or process control environment is preferred. Any combination of related education, experience, certifications, and licenses that will result in a candidate successfully performing the essential functions of the job is an acceptable substitute for the above specified education and experience requirements. Licenses and Certifications Certification(s) from NICET, ISA, the military, or a journeyman electrician license is preferred. Conditions of Employment Must submit to and pass a criminal background, pre‑employment drug test, physical, and functional capacity test. Must possess a valid State of Texas Driver’s License Class "C" (or higher) and good driving record as defined by City policy. An applicant who does not possess a Texas Driver's License or proper class will be allowed ten (10) working days after a job offer is made to obtain proper licensing. Other Requirements Must obtain Class D Water Operator license from the Texas Commission on Environmental Quality (TCEQ) within six months from date of hire. Must obtain Class C Water (Treatment or Distribution) license from TCEQ within two years from the date of hire. Must be able to work shift work, as required. This position is subject to emergency operations. The individual holding this position will be required to work as usual or as needed: during emergency operations, in preparation for prolonged emergency operations and/or during recovery from prolonged emergency operations as directed by his/her direct supervisor, Department Head or designee, or the City Manager or designee. Required Knowledge, Skills & Abilities Knowledge of: Basic electricity, pump and motor, blower, drive, belt, and other operation equipment maintenance needs; basic chemistry and mathematical principle applications; basic water purification equipment processes, controls, instrumentation, and hydraulics; computerized maintenance management software; and knowledge of process control equipment involved in Water and Wastewater. Skilled in: Interpreting charts, flow diagrams, maintenance manuals, and instructions; performing mechanical repairs, including gas/electric welding; distinguishing different colors to read and interpret lab equipment and fluids; working above normal heights (10-100 feet); operating assigned tools and equipment in a safe and proper manner; using personal computer including Microsoft Office, e-mail and the internet; responding appropriately in emergency situations; personnel supervision, training, and in coordinating operations for assigned areas of responsibility; accepting responsibility for his/her actions; performing work accurately and thoroughly; following instructions, safety practices, and standard operating procedures in performing assigned tasks; communicating effectively, clearly, and concisely both orally and in writing; being punctual and attending work regularly; and working effectively with people regardless of their race, sex, color, religion, national origin, age, disability, gender identity or expression, sexual orientation, veteran status, genetics, or job type. Physical Demands and Working Conditions This position requires the ability to perform heavy manual labor and to work in adverse conditions. Must possess mobility to work in the field; strength, stamina, and mobility to climb and descend stairs, and to operate a motor vehicle and visit various City sites. Must possess the ability to climb ladders/steps to heights of up to 150 feet; & wear appropriate personal protective equipment as required. Must also possess mobility to work in a standard office setting and use standard office equipment, including a computer; vision to read printed materials and a computer screen; and hearing and speech to communicate in person and over the telephone or radio. The job involves fieldwork requiring frequent walking, hiking, and/or climbing in and through operational areas to identify situations, problems, or hazards. Finger dexterity is needed to access, enter, and retrieve data using a computer keyboard or calculator and to operate the above‑mentioned tools and equipment. Positions in this classification bend, stoop, kneel, reach, climb to perform work and inspect work sites, and push, and pull drawers open and closed to retrieve and file information. This position requires lifting and carrying tools, supplies, or equipment. Employees must be able to frequently carry, push, or pull 20 to 50 pounds. They must also be able to occasionally lift, push, or pull up to 100 pounds, with or without assistance, and occasionally lift more than 100 pounds, with or without assistance. Employees work primarily in the field and may be exposed to loud noise levels, cold and/or hot temperatures, inclement weather conditions, road and/or land hazards, confining workspace, chemicals, mechanical and/or electrical hazards, and hazardous physical substances and fumes. Employees work partially in an office environment with moderate noise levels and controlled temperature conditions. Employees may interact with upset staff and/or public and private representatives in interpreting and enforcing departmental policies and procedures. Must be able to climb ladders, work in trenches or confined spaces, and perform tasks from awkward positions. Works in outdoor environments and may be exposed to loud noise, hazardous chemicals, hazardous waste (human waste), weather extremes and moving mechanical equipment. Frequently walks, stands, kneels, and operates hand and power tools throughout the workday. Uses personal protective equipment including gloves, safety footwear, hearing protection, hard hats and eye protection. May be required to enter sanitary sewer manholes or storm structures using confined space entry protocols. Ability to distinguish different colors to read and interpret technical relevant equipment and fluids. The City of Lewisville has reviewed this job description to ensure that essential functions and basic duties have been included. The above statements are intended to describe the general nature and level of work being performed and are not intended to be an exhaustive list of all functions, responsibilities, skills, and abilities, which may be required. Additional functions and requirements may be assigned by supervisors as deemed appropriate. The position also requires meeting the essential requirements of the Physical Demands and Working Conditions, with or without reasonable accommodation. Levels of positions within a class series are distinguished by the level of responsibility assumed, the complexity of duties assigned, the independence of action taken, the nature of the public contact made, and the impact and span of tasks performed. This job description is not an employment agreement or contract. The City of Lewisville has the exclusive right to alter this job description at any time without notice. Schedule: Monday-Thursday, 6:30 a.m. – 5:00 p.m. #J-18808-Ljbffr
- ...distribution and collection. Performs assigned duties necessary to repair, replace, and maintain mechanical, electronic, control and instrumentation equipment related to water and wastewater treatment facilities; including Supervisory Control and Data Acquisition (SCADA...SuggestedContract workWork at officeShift work
- About Prime Introducing Prime Controls, L.P. Established in 2004, Prime Controls, L.P.... ...Overview What You Will Do As an Automation Technician, you will be responsible for setting up... ..., start-ups, and troubleshooting instrumentation, wiring, controls, and PLCs. A Typical...SuggestedFull timeFor contractorsWork at officeFlexible hours
- The City of Lewisville is seeking a maintenance technician for its Water and Wastewater Plants, including SCADA/instrumentation, to repair, replace, and maintain electrical, electronic, control and instrumentation equipment and related systems. Requires a High School Diploma...Suggested
- Prime Controls Lp is seeking an Automation Technician to join the dynamic team in Lewisville, Texas. This role requires setting up and troubleshooting instrumentation and controls as well as performing basic PLC and HMI programming tasks. The candidate should have at least...Suggested
- ...materials and objects up to 100 pounds. Employees work in buildings and facilities and are occasionally exposed to loud noise levels, controlled temperatures, confining workspace, chemicals, mechanical and/or electrical hazards, and hazardous physical substances and fumes....SuggestedContract workFor contractorsWeekend work
- ...Avionics Technician Avionics Technicians are responsible to the Avionics Supervisor and shall assure that the procedure outlined... ...methods. Maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior even in very difficult...Work experience placement
- ...Technologies is seeking a detail-oriented Test Technician to support the testing, validation, and... ...and completely. Implement quality control measures to identify and resolve... ...action efforts to resolve non-conformances. Instrumentation and Equipment Maintenance Maintain,...Temporary workMonday to Friday
- ...Line Service Technician Job Category: Operations Requisition Number: LINES002461 Posted: June 10, 2026 Full-Time On-site... ...sit, and use hands to finger, handle or feel objects, tools, or controls; reach with hands and arms; and talk or hear. The employee is...Full timeContract workLocal area
- ...conditions and much more. We’re looking for Electronic Troubleshoot Technicians who are not afraid of challenges. As an Electronic Technician... ...to troubleshoot failed products. Operate RF measurement instruments such as spectrum analyzers, signal generators, network...Temporary workWork experience placementWork at officeFlexible hours
- ...communications technology company is seeking an Electronic Troubleshoot Technician in Lewisville, Texas, to debug and repair 5G products and... ...of electronic circuits and proficiency with RF measurement instruments are essential. The position offers competitive compensation...
$17 per hour
Acosta Sales & Marketing is seeking a Part-Time Retail Display Installer for electronics in Lewisville, TX. You will complete merchandising projects at major retail stores, ensuring displays are properly placed and maintained. The role requires versatility and attention...Hourly payPart time$35.66 - $38.88 per hour
Southwire Company in Denton, Texas, is seeking an Electronic Technician-I to work under the Maintenance Supervisor. This role involves... ...minimum of a High School Diploma and experience in electrical controls. Benefits include 401k with matching, insurance packages, and...Hourly payNight shift- Sanmina-SCI Systems de México in Carrollton seeks an experienced Quality Control Inspector to ensure that products meet FDA and ISO 13845 standards in our Medical Device manufacturing operation. The Quality Control Inspector will inspect parts and materials for compliance...
- ...or an alternative application process. Repair Electronic Technician I Full Time Grapevine, TX, US 20 days ago Requisition ID:... ...repair, setup, calibration, and the testing of recording and control instruments and test equipment. This role ensures systems and components...Hourly payFull timeContract workTemporary workWork experience placementWork at officeLocal areaImmediate startMonday to Friday
- ...Base-station Units through debugging and root cause analysis, leveraging your knowledge of electronic circuits and RF measurement instruments. The position requires strong troubleshooting skills, effective communication, and a background in electronics. Compensation...
$18 per hour
...Line Service Technician Currently seeking a full-time line service technician for our Addison locations. We currently operate over... ...movement, placement, fueling, and storage Fuel movement- quality control, disposal, and paperwork Daily check and upkeep of fuel...Hourly payFull timeVisa sponsorshipShift workAfternoon shift2 days per week- ...Systems de México in Carrollton, Texas, is looking for a Debug Technician to diagnose and repair electronic components. The role... ...working on circuit boards, testing equipment, and ensuring quality control. A background in electronics and experience with diagnostic tools...
- ...station at Addison Airport (KADS). We work on everything from piston to turboprop to light/mid jets, and we’re looking for an Avionics Technician who’s solid, dependable, and takes pride in clean installs and clean paperwork. What you’ll do Install, troubleshoot, repair, and...
- ...Kalman & Company is seeking to hire an experienced Electronics Technician. This will be a full-time position with on-site support... ...maintenance, calibration, and troubleshooting of electronic instrumentation in a mission‑critical operational environment. Responsibilities...Full timeRemote work
$35 - $40 per hour
...Avionics Technician This role focuses on installing, troubleshooting, and repairing avionics systems on general aviation aircraft such as King Air, Cessna 170, and similar small aircraft. You will work with a variety of avionics platforms and electrical systems to...Contract workTemporary workWork at officeDay shift- Heads Up Technologies is looking for a skilled FAA Repair Station Technician in Addison, TX. In this full-time position, you'll test and repair avionics equipment, ensuring all repairs meet strict quality standards. Responsibilities include troubleshooting, product testing...Full time
- Sazerac Company in Carrollton, Texas, is seeking a Production Technician responsible for the safe operation and maintenance of bottling line equipment. This role ensures production efficiency and product quality while guiding temporary team members. Minimum qualifications...Temporary workShift work
- Heads Up Technologies, Inc. is seeking a FAA Repair Station Technician in Addison, Texas to ensure the safety and functionality of aircraft electronics. You will test, troubleshoot, and repair a variety of avionics systems including LED lighting and cabin electronics....
- Sazerac is seeking a Production Technician for its BuzzBallz brand in Carrollton, Texas. In this role, you'll ensure the safe operation of bottling line equipment while maintaining product quality and safety standards. The ideal candidate will have a high school diploma...
- Ben E. Keith Co. is seeking a part-time Utility Representative in The Colony, Texas, to maintain beverage lines for On-Premise accounts. The role involves cleaning lines, fixing pouring issues, and resolving draught problems while providing exceptional service to customers...Temporary workPart time
$18 - $21 per hour
...Electronic Game Support / Maintenance Technician Puttshack is an upscale, tech-infused mini golf experience that appeals to everyone. More than just indoor mini golf, Puttshack leans on its ground-breaking technology to elevate the game, while also serving world-class...Hourly payImmediate startShift workNight shiftWeekend work$18 per hour
Acosta Sales & Marketing is seeking a Retail Display Installer for part-time work in Grapevine, TX. This role involves visiting major retail stores to manage display projects for top clients like Microsoft and Samsung. Candidates should have merchandising experience and...Hourly payPart time$17 per hour
Acosta Sales & Marketing is seeking a Part-Time Retail Display Installer in Denton, TX. The role involves ensuring the proper placement and maintenance of promotional displays at major retail stores, working up to 30 hours per week with flexible scheduling from Monday to...Hourly payPart timeMonday to FridayFlexible hours- ...Job Description Job Description Ford Heavy Line Technician - Planet Ford Dallas We are looking for a Heavy Line Technician to join our team. You’ll be responsible for diagnosing and repairing client and dealership vehicles. We run an honest shop and need honest...RelocationFlexible hours
- ...circuit card assembly and soldering to IPC standards, alongside other repair functions. The ideal candidate should hold an Electronic Technician Diploma and have substantial experience in electronics assembly. Renrns values workforce diversity and provides accommodation for...Full time
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Instrumentation & Controls Technician. Be the first to apply!


