Engineering Technician - Manufacturing
Integrated Polymer Solutions
MAST Technologies seeking a Manufacturing Technician 1 who tends to production machines such as spray booth, clicker press, dip machine, presses, rubber mills, sander, laminator and includes various touch labor activities. About MAST: MAST Technologies is an industry leader in advanced RF and EMI absorbing materials. We create engineered solutions that support mission-critical defense and aerospace applications worldwide. Our employees contribute directly to cutting-edge innovation and enjoy a collaborative environment focused on quality, technical excellence, and continuous improvement. Job Accountabilities:
- Rubber processing area operates rubber mills and hydraulic presses.
- Foam processing area operates spray booth and dip tank.
- Material processing area operates laminator, clicker press to die cut material and touch labor to clean and process material.
- Sanding area operates sander and with critical measurement of material thickness.
- Technicians for all areas must be able to read job specifications and procedures to determine any machine adjustments and the material requirements, in addition the operator must maintain accurate process logs of all activities
- Must be familiar with basic machine functions in order to perform the tasks stated above.
- Must be able to accurately work with scales.
- Must have ability to safely work with cutting knifes and steel rule dies.
- Pushes button or depresses pedal to activate machine.
- Observes machine operation to detect workpiece defects or machine malfunction.
- Measures workpiece dimensions to determine accuracy of machine operation.
- Performs minor machine maintenance such as oiling machines, dies, or workpieces.
- Sets up and breakdown of processes on equipment.
- Operates any equipment needed to perform job.
- Detects and reports defective material or questionable conditions to the department supervisor.
- Maintain the work area in a clean and orderly condition.
- Follows all safety guidelines and rules.
- Performs other work-related duties as assigned.
- Must be able to work overtime to meet production schedule.
- Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
- Ability to compute rate, ratio, and percent and to read and interpret metal rules.
- Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions.
- Ability to deal with problems involving a few concrete variables in standardized situations.
- Able to communicate well with supervisor and follow work instructions.
Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the Engineering Technician - Manufacturing in El Cajon, CA vacancy
- ...MAST Technologies seeking a Manufacturing Technician 1 who tends to production machines such as spray booth, clicker press, dip machine, presses... ...in advanced RF and EMI absorbing materials. We create engineered solutions that support mission-critical defense and...SuggestedPermanent employmentTemporary workWorldwide
- ...continues to be the global leader in the manufacturing of advanced instrumentation for... ...Job Summary The repair depot technician's primary focus is the RMA received from... ...customer downtime. Provide feedback to engineering and production for product improvements...SuggestedWork experience placementLocal area
$20 - $21 per hour
...Job Description Job Description Job Title: Engineering Technician - Cleanroom Manufacturing Job Description This Engineering Technician role supports both engineering and production teams in a cleanroom manufacturing environment, focusing on sustaining and improving...SuggestedContract workTemporary workDay shift$32.71 - $47.11 per hour
...Manufacturing Engineering TechnicianApium Swarm Robotics (ASR) is revolutionizing swarm autonomy software for air, surface, undersea, and ground... ...ambiguity, and operational accountability.The Engineering Technician supports the build, integration, test, and troubleshooting...SuggestedPermanent employmentWork at officeLocal area$38 - $45 per hour
...source solutions include turnkey in-house capabilities with design assistance, as well as engineering applications and automated control systems. Job Summary The Automation Technician II will inspect, test, adjust and, repair new or existing electric, electronic,...SuggestedHourly payFor contractorsFlexible hours- .... DN is seeking a skilled and innovative Mechanical Engineering Technician to design, develop, diagnose, and test equipment, including... ...systems, ensuring performance, safety, reliability, and manufacturability. Collaborate cross-functionally to integrate systems...Flexible hours
- ...Precision Metal Products (PMP) is a growing aerospace manufacturer specializing in closed-die forgings, precision machining, heat... ...industrial applications. We are seeking a hands-on Manufacturing Engineer to support new product introduction, process development, production...Permanent employmentWork at office
$57k - $106k
...national security. Job Title: Quality Technician C Job Code: 46921 Job Location:... ...that products meet contractual, engineering, and regulatory requirements. Support... ...documentation, and coordinating with manufacturing, engineering and other functions as needed...For subcontractorWork at officeLocal areaFlexible hours$38 - $45 per hour
...Automation Technician II The Automation Technician II will inspect, test, adjust and, repair new or existing electric, electronic... ..., histories, etc. Qualifications • Bachelor's degree in Engineering (preferably Electrical or Mechanical) or equivalent field experience...Hourly payFlexible hours- ...Competitive Compensation Career Advancement Opportunities Job Summary: We are looking for a skilled and experienced HVAC Technician to join our team! In this role, you will install, service, or repair heating and air conditioning systems in residences or...Flexible hours
$46 - $56 per hour
...source solutions include turnkey in-house capabilities with design assistance, as well as engineering applications and automated control systems. Job Summary: The Automation Technician III will inspect, test, adjust and repair new or existing electric, electronic,...Hourly payFor contractorsFlexible hours$46 - $56 per hour
...Automation Technician III The Automation Technician III will inspect, test, adjust and repair new or existing electric, electronic... ...control systems and programing required. • Bachelor's degree in Engineering (preferably Electrical or Mechanical) or equivalent field...Hourly payFlexible hours$91.08k - $113.85k
...everything we do, opening up and protecting our planet. With over 16,000 employees across 32 manufacturing sites in 12 countries we serve over 90% of the world’s aircraft and engine manufacturers and achieved sales of 3.6bn in 2025. There are no limits to where you can...$24.8 - $37.2 per hour
...unrivaled compensation and benefits. Minimum Education: ~ High School Diploma or GED Experience: 3+ Years ~ The Engineering Technician 2 has a thorough knowledge of shipboard C5ISR installation practices and procedures, as demonstrated by successful...Relocation- ...everything we do, opening up and protecting our planet. With over 16,000 employees across 32 manufacturing sites in 12 countries we serve over 90% of the world’s aircraft and engine manufacturers and achieved sales of 3.6bn in 2025. There are no limits to where you can...Local area
$18.71 - $27 per hour
...To make these, you must see, test and manufacture them at scale-faster and better than ever... ...across your area of expertise. As a Technician, you will be the 1st line of support... ...interface with multiple departments (Quality, Engineering, Production, Sales), working together...Hourly payMinimum wage$20 - $30 per hour
Overview General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in Chesapeake, VA, and San Diego, CA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and...Relocation- ...and other surface combatants, as well as at repair and technical activities ashore. Key Responsibilities Serve as an Electronics Technician (ET) or Fire Controlman (FC) after training, based on performance and Navy needs; as an ET, maintain and repair radar, communication...ApprenticeshipLocal areaRotating shift
$33 - $40 per hour
...Job Description Job Description Senior Engineering Technician Location: San Diego Full Time: Non-Exempt, Onsite Hourly: $33... ...and cross-functional teams to improve system reliability, manufacturability, and performance Assist with equipment installation, calibration...Hourly payFull timeShift work- ...Veridiam Manufacturing PositionVeridiam is a strategic manufacturing partner with over 60 years of experience serving the aerospace, industrial, medical, and nuclear markets. Our roots were formed in the exacting nuclear and aerospace industries, expanded into Medical...Permanent employmentDay shift
- ...Job Description Job Description Job Title: Manufacturing Engineer Location: El Cajon 92020 Onsite/ Hybrid/ Remote: Onsite Job Description: Position Summary: The Manufacturing Engineer – Project Support is responsible for supporting active aerospace...Remote work
- ...Job Description Job Description Veridiam is a strategic manufacturing partner with over 60 years of experience serving the aerospace... ...confer as necessary with production employees, supervisors, engineers, quality management, suppliers and customers to develop and understand...Permanent employment
- ...We are seeking a detail-oriented and technically skilled Engineering Technician to support engineering operations, production processes, equipment... ...improvement initiatives in a fast-paced electronics manufacturing environment. The successful candidate will work closely...
$35 - $40 per hour
...with Anderson PHA — where your skills power San Diego homes and your career possibilities are limitless.Role OverviewThe Electrical Technician will perform a variety of electrical installations, troubleshooting, repairs, and maintenance for residential and commercial...ApprenticeshipWork at officeLocal area- Job Title: Nuclear Engineer (Naval Reactors Engineer) Category / Component: Officer • Active Overview Design, regulate, and oversee the Navy’s nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear...Contract workApprenticeshipWork at office
- ...99.40 / year Top 5 Skills: Solid understanding of electrical engineering circuits, operation of semiconductor devices(PMIC, digital and... ...in the evaluation, characterization, and development of manufacturing solutions for leading edge products in processes and bring up...Temporary workLocal areaRemote workShift workDay shift
$35 - $45 per hour
...Connections: Connect refrigerant lines, perform brazing and soldering, evacuate systems, and charge them with refrigerant according to manufacturer guidelines. Fuel & Electrical Hookups: Safely connect gas piping and wire both low-voltage and line-voltage components....Hourly payFull timeLocal area- ...Helicopter/Fixed Wing A&P Avionics Mechanic California Avionics Technician Neal Aviation El Cajon, California, USA Position... ...tools to meet AAFRs, STCs and industry standards. Manufacture and install sheet metal provisions to support avionics, electoral...Permanent employmentShift work
- ...Job Description Job Description Job Title: Manufacturing Engineer Location: El Cajon, CA 92020 Onsite from day 1 at Client facility Job Description: Responsible for developing, implementing, and improving robust aerospace manufacturing processes supporting...
- ...Now Hiring: Refrigeration Maintenance Service Technician Location: San Diego, CA | Full-Time | Competitive Pay + Benefits San Diego Refrigeration is growing fast, and we’re looking for a skilled Refrigeration Maintenance Service Technician to join our dynamic team...Full timeImmediate start
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Engineering Technician - Manufacturing. Be the first to apply!
Related searches
- design technologist El Cajon, CA
- technical designer El Cajon, CA
- engineering operations technician El Cajon, CA
- engineering technician El Cajon, CA
- chemical manufacturing El Cajon, CA
- fabrication technician El Cajon, CA
- quality control manufacturing El Cajon, CA
- quality manufacturing El Cajon, CA
- sales representative manufacturing El Cajon, CA
- fabrication specialist El Cajon, CA




