Maintenance II

Job Summary The Maintenance I team member is responsible for supporting the physical upkeep and safety of the community by completing routine maintenance tasks, unit turnovers, and preventative maintenance under the supervision of the Property Manager or Maintenance Supervisor. This role helps ensure a secure and well‑maintained living environment for residents, visitors, and staff. Key Responsibilities General Maintenance & Repairs Complete work orders involving basic plumbing, carpentry, painting, and electrical repairs. Troubleshoot minor maintenance issues and escalation complex repairs to senior staff. Replace light bulbs, screens, hardware, and small fixtures. Perform preventive maintenance checks on HVAC units, water heaters, and other common systems. Assist in scheduling and coordinating vendor work as directed. Use appropriate tools and follow proper safety procedures during all repairs. Unit Turnovers & Interior Prep Support make‑ready efforts by cleaning, painting, patching walls, and repairing appliances or fixtures. Perform trash‑outs and remove debris or furniture left by former residents. Ensure vacant units are presentable and safe for new move‑ins. Report supply needs or delays in readiness to the Maintenance Supervisor. Grounds & Exterior Care Perform regular exterior cleaning, litter removal, and walkway sweeping. Assist with lawn care and seasonal landscaping tasks as assigned. Shovel snow and apply salt to sidewalks and entryways during winter months. Monitor and report exterior hazards such as broken steps, loose handrails, or lighting outages. Safety & Compliance Observe and report safety concerns, including potential exposure to lead paint, asbestos, or hazardous conditions. Follow all OSHA, Fair Housing, and Evergreen safety policies. Use PPE and maintain a safety‑first mindset at all times. Participate in unit or building inspections as directed. Support emergency response protocols and on‑call needs. Inventory & Tools Maintain proper care of tools, ladders, and equipment. Assist with tracking and organising supplies, maintenance materials, and parts inventory. Notify supervisor of low stock, tool malfunctions, or supply ordering needs. Keep maintenance workspaces clean and free of hazards. Education & Experience High school diploma or GED required. 0–2 years of experience in general property maintenance or related roles preferred. Experience working in a residential or multifamily environment a plus. Ability to read and follow written instructions, safety procedures, and work orders. Basic familiarity with: Hand tools: hammers, screwdrivers, wrenches Power tools: drills, grinders, saws Moving aids: dollies, carts, ladders Measuring devices: voltmeters, pH testers, gauges Comfortable working both indoors and outdoors in various conditions. Skills Maintenance Fundamentals – Understands how to perform general repairs and use tools and materials safely. Resident Service – Communicates respectfully and courteously with residents when entering units or responding to requests. Safety Awareness – Identifies hazards and consistently follows safety protocols and PPE requirements. Problem‑Solving – Troubleshoots basic maintenance issues and knows when to elevate. Time Management – Prioritises tasks and meets timelines for turnovers and routine work orders. Adaptability – Responds to changing needs, emergencies, or weather conditions with minimal disruption. Team Collaboration – Supports maintenance and site teams with professionalism and cooperation. Dependability – Follows through on assignments, remains available for on‑call needs, and supports the broader maintenance operation. Work Environment & Physical Requirements Regularly works both indoors and outdoors in residential property settings. Frequently required to walk, climb stairs, lift tools, bend, kneel, and carry materials. Must be able to lift/move up to 50 pounds regularly and up to 100 pounds occasionally. Exposed to seasonal weather, dust, cleaning agents, and construction materials. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. Qualifications Conduct all business in accordance with company policies and procedures, state and federal laws such as OSHA, ADA, Fair Housing, etc. Document resolutions to all work orders. Perform maintenance and repair tasks and ensure that all make‑ready repairs and services are completed correctly and on schedule. Assist in troubleshooting maintenance problems and make recommendations for correction. Assist in the collection of bids and procurement of outside services and/or vendors for contract or repair work. Remain available to perform work orders and routine, preventative and deferred maintenance tasks. Provide information to be used in work order status reports, documentation of capital improvements and major repairs. Assist in keeping grounds neat and free of litter. Rake, sweep, shovel as circumstances warrant. Remain aware of the condition of physical property throughout the community and immediately notify management of any unsafe conditions. Maintain accurate records regarding preventive maintenance, work orders (received and completed), expenditures, apartment make‑ready status, work‑in‑progress, etc. Assist in scheduling and performing minor and routine maintenance on all appropriate equipment on a regular basis. Inspect and maintain all tools in excellent condition and inform management of the inventory status of spare parts and maintenance materials. Look out for any safety hazards, including LBP, asbestos, radon, hazardous spills and workplace safety. Notify management immediately if safety hazards exist. Maintain a “safety first” attitude. Ensure all safety equipment is used consistently and appropriately. Perform work area clean‑up and safety related duties. Attendance Must be punctual and timely in meeting all performance requirements, including attendance standards and work deadlines; beginning and ending assignments on time; and scheduled work breaks where applicable. Competencies Intellectual Problem Solving – Identifies and resolves problems in a timely manner; gathers and analyzes information skillfully; develops alternative solutions; works well in group problem‑solving situations. Technical Skills – Assesses own strengths and weaknesses; pursues training and development opportunities; strives to continuously build knowledge and skills; shares expertise with others. Interpersonal Customer Service – Manages difficult or emotional customer situations; responds promptly to customer needs; solicits customer feedback to improve service; responds to requests for service and assistance; meets commitments. Organization Cost Consciousness – Works within approved budget; develops and implements cost‑saving measures. Certificates, Licenses, Registrations Some trade school certificate(s) in HVAC, electrical, and plumbing. Must have valid and appropriate state driver's license and automobile insurance coverage. Other Skills, Abilities, and Qualifications Ability to perform duties under pressure and meet deadlines in a timely manner. Ability to effectively communicate with residents, vendors, and staff. Ability to inspect property, grounds, and apartments. Must be able to work in a fast‑paced, multi‑faceted and customer service‑oriented environment. Must be able to work as a team, interact with others in a professional/pleasant manner and exercise problem‑solving skills. 0–2 years’ experience in similar positions of performing general property maintenance tasks related to multi‑unit residential complexes. Frequent need to utilize personal transportation to pick up replacement parts and supplies from vendors; rotation “on‑call” status may occasionally require expedient travel to assigned property at moment’s notice. Must be available for “on‑call” services on a rotating basis, weekends and/or emergencies as circumstances warrant. Must be knowledgeable and skilled in the safe use and maintenance of the following tools: Hand Tools: various wrenches, hammer, grips, saws, sledgehammer, snips, posthole diggers, etc. Power Tools: wrenches, grinders, sanders, drills, saws, etc. User‑Moved Aids: wheelbarrows, dollies, hand trucks, buckets, hoists, jacks, step ladders, full ladders, double ladders. Mechanical Equipment: motors, pumps, compressors, blowers, electric and hand power augers, etc. Measuring Devices: calipers, voltmeters, ohmmeters, testing meters, PH tests, gauges, etc. The employee must be capable of adapting, with minimal or no advance notice, to changes in how business is conducted and work is accomplished, with no diminishment in work performance. All employees are responsible for observing safety and security procedures as applicable and reporting potentially unsafe conditions to management within their shift, prior to clocking out for the workday. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. While performing the duties of this job, the employee is frequently exposed to outside weather conditions. The employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. #J-18808-Ljbffr