QA/QC Inspector III
ACCO Engineered Systems
Job Description Job Summary: The QA/QC Inspector III is the technical lead for quality on an assigned project or fabrication shop. The position directs the inspection work of the QA/QC inspectors assigned to it, sets clear expectations for how inspection is performed and recorded, and coaches inspectors toward consistent practice. The position owns execution of the project-specific Quality Control Plan ensuring the first-in inspection process reduces risk and cost from fabrication and installation errors, driving resolution of quality issues with the project team, and monitoring issues so that systemic problems are addressed rather than repeated. It works proactively with the field, shop, and/or project management team and provides the avenue for input into quality requirement changes.
POSITION IN THE QA/QC TEAM
QA/QC Inspector III is the senior inspection level and the first level that supervises other inspectors; formal personnel authority begins at QA/QC Area Supervisor. Assigned alone, it is the technical authority for the inspection scope of a project or fabrication shop: it sets the inspection plan, holds the hold points, and releases the turnover package. Where other inspectors are assigned, it directs their technical work, and where a project requires more than one Inspector III, one of them may be assigned as QA/QC Inspector - Lead. Hiring, performance management, discipline and pay decisions sit with the QA/QC Area Supervisor and above.WORKING WITH THE PROJECT TEAM
QA/QC supports fabrication, installation and project management. Those groups are this position's customers inside ACCO, and what they build is what reaches the contractual customer. The position works as part of the project team - available, responsive, and practical about how the work gets built - not as an outside check on it. Findings are raised to be resolved. Getting to the work early, before it is covered, is part of the job. Field and shop personnel take day-to-day direction from local project leadership (Project Management, Foreperson, General Foreperson, or Superintendent) on a dotted-line basis: where to be, when, and how the day is coordinated, with site adherence to appropriate conduct and safety in mind. Inspection decisions, acceptance and rejection, and the quality record run through the QA/QC line to the QA/QC Area Supervisor and the QA/QC Regional Manager. Where the two pull against each other the QA/QC line governs the quality decision, and the conflict is raised the same day rather than settled on site. Essential Duties and Responsibilities: Leading the inspection effort Set expectations for inspection practice, documentation standards, and professional interaction with field crews and their Forepersons, and hold assigned inspectors to them. Assign inspection work daily among the inspectors on the project or shop based on scope, risk, and schedule. Coach and develop assigned inspectors; onboard new inspectors to project quality expectations; identify training and certification needs and raise them to the QA/QC Area Supervisor. Verify that assigned inspectors hold current certification, site badging, and required training before they perform work. Ensure effective collaboration with inspection staff with a dotted line to local project/shop leadership. Quality Control Plan execution Own execution of the project-specific Quality Control Plan and Inspection and Test Plan and confirm every commitment in them is met. Drive the first-in inspection process on new crews, processes, and material, so errors are caught on the first article rather than after the run. Maintain the hold and witness point schedule and confirm every point is attended and recorded. Verify that approved welding procedure specifications are available where the work is being performed and that welder qualification and continuity are current for the processes in use. Audit execution of the plan on the assigned project or shop, document findings with owners and due dates, and verify closure. Apply trend analysis to inspection and rejection data for the assigned project or shop and recommend process improvements. Issue resolution Lead the identification, documentation, and resolution of nonconformances, installation defects, documentation gaps, and code or specification deviations. Ensure nonconformance reports, corrective actions, and re-inspection activities are handled promptly, with closure evidence recorded. Act as the first escalation point for unresolved field quality issues on the assigned project or shop. Monitor recurring issues so that systemic problems are addressed at the cause rather than corrected repeatedly at the symptom. Coordination, reporting, and turnover Engage with the general contractor's quality assurance representative on inspection planning, compliance, nonconformance management, and audits. Attend weekly project update meetings and issue the QA/QC three-week look-ahead for the assigned project, identifying any inspection demand with no inspector assigned. Maintain the assigned project's rows in the regional QA/QC project tracker and refresh them weekly. Complete the QA/QC site walk and project health form on the schedule set by QA/QC leadership and route it to the Project Manager, Superintendent, and QA/QC leadership. Verify that turnover documentation is assembled progressively and complete at substantial completion, and release the turnover package following review by the Project Team and QA/QC leadership; prepare the final quality letter for QA/QC leadership review. Participate in ACCO's safety programs and demonstrate a commitment to a goal of ZERO injuries or incidents. Other duties as assigned by QA/QC leadership, in conjunction with the project team. Temporary QA/QC Lead Assignment A project that requires more than one QA/QC Inspector III may be assigned a QA/QC Inspector - Lead. The Lead is one of the assigned Inspector IIIs, named in writing by the QA/QC Area Supervisor with the Regional Manager, and carries day-to-day technical direction of the inspection team on that project for as long as the project requires it. Where the work spans multiple buildings for a single customer it is called Campus Lead. The Lead assignment is a temporary increase in responsibility, not a step on the ladder. It ends when the project no longer requires it. Holding it is not a promotion to QA/QC Area Supervisor and is not a prerequisite for that position, although the experience it gives counts toward readiness for it. Quality Authority Prepare nonconformance reports and recommend their disposition on the assigned project or shop and verify corrective work and re-inspection once a disposition is decided. Nonconformance reports are issued and dispositioned by the QA/QC Area Supervisor or above jointly with the Project Team. This position identifies, documents, and prepares the report; it does not issue or disposition one. Stop work that is nonconforming, that is proceeding without a required hold or witness point, or that is being performed by personnel whose qualification cannot be verified - with immediate notification to the Field/Shop Leadership, Project Manager, and QA/QC leadership. Reject material that does not conform to the specification, submittal, or receiving inspection requirements. Assign inspection work and sequence inspection coverage among the inspectors assigned to the project or shop. Release the project turnover package, following review by the Project Team and the QA/QC leadership. Withhold documentation sign-off, turnover readiness, or a recommendation for acceptance where the required objective evidence is incomplete. Escalate directly to QA/QC leadership where a quality issue is not being resolved at the project level. Quality decisions are independent of production and direct labor supervision. The authority to stop nonconforming work is not contingent on prior approval. Limits of Authority This position does not: Approve, revise, or issue welding procedure specifications, procedure qualification records, or welder performance qualification records - these are written and issued by the QA/QC Regional Manager under the oversight of the Director of QA/QC. Qualify welders or brazers, unless holding a current CWI and specifically delegated in writing by the Director of QA/QC. Approve engineering deviations, design changes, or waivers of a specification requirement. Hire, terminate, discipline, set compensation for, or complete formal performance reviews of QA/QC personnel. Issue or disposition a nonconformance report - decided by the QA/QC Area Supervisor or above jointly with the Project Team. Commit ACCO to a schedule or cost position or sign the final quality letter without QA/QC leadership review. Position Requirements (Work Experience, Skills, Licenses, etc.): To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Associate degree (A.A.) or equivalent from a two-year college or technical school with ten (10) years of overall experience and/or training, or an equivalent combination of education and experience. A degree is not required where the experience and credentials are held. Eight (8) or more years of experience in quality control focused on ASME B31 piping codes, industrial and commercial construction, fabrication, welding, or nondestructive testing. Three (3) or more years of experience leading and directing the work of others in a construction or fabrication setting. Current certification in accordance with AWS QC1 as a Certified Welding Inspector (CWI), maintained in good standing. Proficient understanding of ASME Section IX, including reviewing welding procedures and welder and brazer qualification and continuity records; working knowledge of ASME B31.1, B31.3, B31.5, B31.9, and Section V. Ability to review third-party PT, MT, UT, and RT examination reports critically - that the correct technique and coverage were applied, the correct acceptance criteria used, and the results properly dispositioned. ACCO does not perform these methods; certification to perform them is not required. Ability to build and maintain an Inspection and Test Plan with defensible hold and witness points, and to contain a quality problem through traceability rather than broad reinspection. Effective written and verbal communication, including the ability to speak effectively before groups of customers or employees; sound decision-making under schedule pressure. Annual Jaeger J1 near-vision examination; valid driver's license; regular and routine attendance Education and Experience: Desired: Senior Certified Welding Inspector (SCWI) and/or ICC Mechanical - Commercial certification. Experience on semiconductor, high-purity, cleanroom, or mission-critical data center projects. Experience administering welder performance qualification and continuity records under ASME Section IX. OSHA 30, confined space, and first aid / CPR. Experience with Box, Bluebeam, Smartsheet, Procore, PlanGrid. Conversational Spanish. ACCO Competencies: Proactivity/Initiative : Recognizes what needs to be done and accomplishes it in a manner appropriate for one's level/position and with minimal supervision. Perseverance : Shows wherewithal to fight for difficult goals despite challenges and to bounce back from adversity. Motivation/Dedication : Commits to excellence in pursuing unselfish goals. Initiates action with collective goals, takes responsibility, and shows personal humility. Technical Curiosity/Willingness to Learn : Interest in seeking out new experiences, knowledge, and candid feedback; demonstrating an openness to learning and change. Insight : The ability to gather and make sense of information that suggests new possibilities. Engagement : Shows a knack for using emotion and logic to communicate a persuasive vision and connect with people. People Skills : Is approachable and gains the mutual trust and respect of others. Understands people's strengths & weaknesses and actively seeks to understand other perspectives. Communication : Fosters open, honest, candid and respectful communication. Effectively assesses, defines and communicates issues in a timely manner, both written and verbal. Teamwork : The ability to effectively work toward common goals with others by supporting, encouraging, and sharing information in an authentic and approachable manner. Big Picture : Understands and contributes to the organizations' short- and long-term business strategy. On a personal level has independently developed a vision for short- and long-term career success. Problem-Solver : Ability to identify, analyze, and solve problems in support of personnel, group, department, or organizational objectives. Execution : Effectively takes a vision and translates into action by including the right people. Identify and remove barriers, when possible, to achieve results. Demonstrates appropriate compromise, effective time management, prioritization practices and holds team members (including themselves) accountable for their performance/conduct. Professionalism : Respectfully observes and challenges the status quo with intent for improvement. Can take direction, accept feedback, and take full responsibility for their actions. Lead by example through positive influence and ethical leadership with consideration of the entire organization. Job Responsibility Level: People manager with direct reports. This role supervises QA/QC Inspector I and II assigned to the same project or shop. Personnel actions remain with the QA/QC Area Supervisor. Travel Requirements: Travel based on business needs to and from the primary office, regional branch offices, fabrication facilities, and project sites. Work location varies by assignment; overnight travel may be required. Hours: Non-exempt, hours and shift schedule following area project requirements and in accordance with applicable law. Overtime, shift work, and weekend coverage occur based on project schedule and are compensated in accordance with company policy and applicable law. Hours worked are recorded accurately, including time spent traveling between sites during the workday. Physical Demands: (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) Frequently lift and/or move up to 10 pounds; occasionally lift and/or move up to 25 pounds. Jaeger (J1) near-vision acuity, examined annually; close and distance vision with the ability to adjust focus. Regularly required to walk, climb stairs, sit, stoop, kneel, crouch, or crawl. Access active construction sites and fabrication shops, including elevated work areas and confined spaces, using required fall protection and personal protective equipment.#ACCO
#LI-AN1
About Us Why join ACCO? ACCO Engineered Systems is one of the largest mechanical contractors in the country. Since 1934, owners and builders have selected ACCO to design, install, and maintain more than 250,000 mechanical projects. ACCO is dedicated to the design, fabrication, installation, maintenance and service of commercial and industrial HVAC, refrigeration, plumbing, process piping, and building automation systems. Whether your project is a low or high-rise office building, a shopping mall, hospital, semi-conductor fabrication facility or pharmaceutical manufacturing plant...ACCO can design, build, install, and maintain a mechanical system to meet your needs. Here at ACCO, we are a part of something bigger. Just ask our customers: California Academy of Sciences, L.A. Live, and San Francisco 49ers Stadium. While we have been around for 80+ years, we continue to grow at a dynamic pace. And we are looking for talented individuals to join our team. What's great about working at ACCO is that we're a big enough company to be the leader in HVAC mechanical contracting in California and the Southwest U.S., but as a 100% employee-owned ESOP, we're a private company with a family-oriented feel. Several of our employees have worked at ACCO for twenty-five, thirty, and even over forty years! Together, the employees of ACCO are comprised of intelligent, dedicated, and entrepreneurial team members who put customers first and enjoy what they do.ACCO IS AN EQUAL OPPORTUNITY EMPLOYER AA M/F/V/D.
We proudly hire U.S. Military Veterans, and those qualified are encouraged to apply. Equal Employment Opportunity is The Law.|Pay Transparency Nondiscrimination Provision ACCO will consider qualified applicants with criminal histories for employment. Notice to Outside Recruiters: Hiring managers are not authorized to review or accept recruiting agreements from any outside recruiting agencies. Outside recruiting agencies should not submit unsolicited resumes without signing the company's recruiting agreement. ACCO Engineered Systems$2,000 per month
Job Description Job Summary: The QA/QC Inspector III is the technical lead for quality on an assigned project or fabrication shop. The position directs the inspection work of the QA/QC inspectors assigned to it, sets clear expectations for how inspection is performed...SuggestedDaily paidTemporary workFor contractorsWork experience placementWork at officeLocal areaImmediate startRelocationRelocation packageShift workNight shiftWeekend work- ...McMillen, Inc. is seeking an Onsite Representative / QAQC Inspector - Heavy Civil to support field operations on water resource projects. You will monitor construction activities, ensure conformance to specifications, and uphold high quality and safety standards. All...Suggested
- ...five (5) years’ experience in general aviation maintenance required Airframe & Powerplant Certifications required Previous QA/QC Aircraft Inspector experience Experience with Gulfstream, Dassault Falcon, King Air, Cessna, Piper and Pilatus Strong knowledge of FARs...SuggestedTemporary workRelocation packageMonday to FridayFlexible hours
$65k - $100k
Job Description QA/QC Inspector - Underground Utilities \n \n Coffman Excavation is a growing leader in the earthwork industry. We are looking for a QA/QC Inspector to join our team. We take great pride in our work, employees and our community. \n \n We are seeking...SuggestedWork at officeMonday to Friday- ...Quality Control Inspector QC Inspector Role and Responsibilities: This person works under limited supervision and provides support by checking parts against established blueprint specifications. Will also maintain documentation on all inspections and may prepare reports...Suggested
$34 - $42 per hour
...Journeyman Electrical QA/QC InspectorOur client in the Boise, ID location is currently hiring for a Journeyman Electrical QA/QC Inspector. This is a Contract-to-Hire opportunity supporting electrical quality inspection, testing, commissioning, and compliance activities...Contract workFor subcontractorCurrently hiringWork at officeMonday to Friday- Job Summary Perform in-progress and final quality control inspections on articles under assembly, repair, and/or alteration. Ensure all maintenance performed is in accordance with FAA regulations, the RSM (Repair Station Manual), and the OEM (original Equipment...Full timeRelocation packageMonday to Friday
- ...quality is maintained by the process. 7. Communicate weekly audits to QA and Manufacturing leadership and highlight areas needing... ...necessary but preferred experience in candidates includes: 1. Prior QA or QC experience is desired. 2. Ability to use ANSI AQL table and...Flexible hoursShift work
- Quality Inspector The Quality Inspector will report to the site Quality Manager or Quality Field... ...the project team in assuring that Project QC documentation is complete and procedures... ...resolution by others. Conduct regularly scheduled QA/QC meetings, review logs of Deficiencies,...Full timeWork experience placementWork at officeLocal areaShift work
$20 - $30 per hour
Adecco is hiring experienced Quality Control Inspectors to support printed circuit board assembly lines for a family-owned company in Nampa. This position is responsible for inspecting electronic components and completed assemblies to identify defects and verify compliance...Hourly payTemporary workLocal areaImmediate startMonday to Friday$20.75 per hour
...Pearl Harbor Commissary Position: Quality Control Inspector Salary: $20.75/Hour Job Overview Trace Inc. is a Military Contractor and has been in business since 1993. We are currently located on 19 different Military Bases throughout the nation. In addition to being a Non...Full timeContract workFor contractorsWork at officeShift workNight shift- ...Job Description Job Description Associate Special Inspector About Us STRATA provides professional geotechnical engineering... ...building codes, specifications, and contract documents Perform QA/QC tests on construction materials in accordance with AASHTO, ASTM...Contract workFor contractorsWork at officeLocal area
$20 - $24.5 per hour
...and work remote from home! The Default Claims Quality Assurance ("QA") Analyst is responsible for review and reconciliation of all... ...One (1) or more years' mortgage servicing default experience, or QA/QC experience in another line of business, or College Graduate. Able...Remote workWork from home$34 per hour
...Job Description Job Description Job Title: Journeyman Electrical QA/QC Inspector Job Description \n We are seeking a detail-oriented Journeyman Electrical QA/QC Inspector with 35 years of hands-on electrical field experience. This individual will inspect electrical...Full timeContract workTemporary workFor subcontractorWork at officeLocal area- ...Site Quality Inspector Driven by Vision | Industrial-Strength Construction | Powered by Passion OVERVIEW Are you looking to work for a successful, stable, and growing company that rewards employees with annual bonuses and exceptional benefits ? BMWC is an...Work at office
- ...JOB TITLE: QA/QC- Process Piping - CWI SUMMARY: Quality Control inspection and associated documentation of Process Piping systems... ...for review as necessary. Responsible for verifying that all inspectors under the subcontractors for this project are qualified to...For contractorsFor subcontractorSecond jobLocal areaFlexible hours
- ...Senior Special Inspector About Us STRATA provides professional geotechnical engineering consulting, construction inspection, and... ...structural steel inspections, fabrication shop inspections, or related QA/QC activities. Valid driver's license with an acceptable...For contractorsWork at officeLocal areaWeekend work
$210k - $250k
...Rinvio is hiring an MEP QA/QC Manager - Low Voltage to oversee low-voltage quality, system integration, testing readiness, and turnover for mission-critical construction projects in the Boise, ID area. Pay: $210,000-$250,000/year, based on experience Location: Boise...Weekly payFull time$75k - $95k
...Job Description Job Description QA & QC Manager Ocean Park Mechanical (OPM) is one of the premier design-build mechanical contractors... ...in Plumbing/HVAC project management ~ AWS Certified Welding Inspector (CWI) Certification ~ Jobsite experience would be considered...For contractors- ...weldments. This role ensures code compliance and robust documentation, driving a culture of top-quality workmanship. The incumbent will administer QC programs, respond to non-conformances, and work with management to maintain rigorous record keeping. #J-18808-Ljbffr Therma
$225k - $260k
...Rinvio is hiring a Mission Critical QA/QC Lead / Manager to lead quality programs across MEP and mission-critical systems on data center and critical infrastructure construction projects in the Boise, ID area. Pay: $225,000-$260,000/year, based on experience Location...Weekly payFull time$73.3k - $110k
Grounded in safety, quality, and ethics, our experts lead their fields with dedication, a creative spirit, and a vision for growth. We draw from more than 20 technical specialties worldwide and are devoted to fostering a community of diverse talents, backgrounds, and expertise...Full timeTemporary workPart timeCasual workWork at officeLocal areaWorldwideFlexible hours- ...Job Description Construction Inspectors spend the majority of their time working on projects performing construction related inspection requiring specific certifications and/or experience. Perform daily inspection of construction projects monitoring quality and adherence...Local area
$190k - $230k
...Rinvio is hiring a Mission Critical QA/QC Engineer / Manager to support quality inspections, deficiency tracking, testing documentation, commissioning readiness, and turnover on MEP-heavy data center and critical infrastructure construction work in the Boise, ID area....Weekly payFull time$20 - $22 per hour
...Job Title: Quality Inspector Job Description We are seeking dedicated Quality Inspectors to join our team on a contract-to-hire basis, with opportunities across multiple shifts. This position involves inspecting finished Printed Circuit Boards (PCBs) for defects, requiring...Weekly payContract workTemporary workShift work- ...Engineer with strong experience in software testing and a growing focus on AI-driven quality practices. This role combines traditional QA disciplines with modern AI/ML testing strategies, including validating AI models, automating test flows with AI-assisted tooling, and...Contract workRemote work
- ...Transportation Security Inspector – Aviation Opportunities in Garden City Transportation Security Inspectors help ensure that airports, air carriers, cargo facilities, and other regulated aviation organizations follow federal transportation-security requirements. Rather...Full timeWork at officeLocal areaFlexible hoursNight shift
- ...Field Inspector Opportunity Seek Now is searching for capable 1099 independent sub-contractors to provide accurate, impartial, and complete home and commercial property inspections. Our 1099 Field Inspectors are the frontline experts who assist and collect data for...Weekly payFor contractorsFor subcontractorWork at officeFlexible hours
- ...Underground Storage Tank Inspector This role will cover Oregon, Washington, Idaho, and Montana markets. "TRAVEL" heavy position. Tanknology, a United Uptime Services Company, a fast-growing leader in the petroleum services industry, is looking for experienced, energetic...Daily paidApprenticeshipTraineeshipNight shift
- ...every stage of a project.At Atlas, we're providing services that enable communities to flourish and thrive, and if you're a Special Inspector ready to ensure the quality and compliance of construction materials and projects through field inspections, testing, and...For contractorsTraineeshipLocal areaLong distanceShift workWeekend workAfternoon shiftEarly shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to QA/QC Inspector III. Be the first to apply!
- quality assurance representative Garden City, ID
- qa technician Garden City, ID
- quality control representative Garden City, ID
- quality control inspector full time
- shipyard qa inspector
- quality inspector cmm
- aerospace quality inspector
- quality receiving inspector
- quality inspector contract
- pharmaceutical qa inspector



