Design and Release Engineering- Fastening

Full-time

General Motors Proving Ground

Job Description
This role is categorized as hybrid, meaning the selected candidate will be expected to work on‑site at the Warren Tech Center at least three days per week (or other frequency determined by their manager).
This role is not eligible for relocation assistance
At General Motors, our product teams are redefining mobility. Through a human-centered design process, we create vehicles and experiences that are designed not just to be seen, but to be felt. We’re turning today’s impossible into tomorrow’s standard —from breakthrough hardware and battery systems to intuitive design, intelligent software, and next-generation safety and entertainment features.
Every day, our products move millions of people as we aim to make driving safer, smarter, and more connected, shaping the future of transportation on a global scale..
About the role:
The Fastening Engineer supports the design, selection, and validation of mechanical fasteners and bolted joints used in vehicle systems. This role ensures joints are robust, cost-effective, and manufacturable, while meeting safety, durability, and quality requirements. The engineer collaborates closely with Vehicle Engineering, Manufacturing Engineering, Supplier Quality, and Fastener Suppliers to apply GM global fastening standards and best practices.
What You’ll Do (Key Responsibilities)
Support the design and analysis of threaded and non-threaded joints (bolts, nuts, retainers, studs, washers, etc.) for assigned vehicle components and systems.
Assist in fastener selection using fastener catalogs, engineering standards, and part classification tools.
Run basic joint calculations (e.g., clamp load, torque, joint slip, thread engagement, strength checks) using standard GM calculators and methods.
Help develop and maintain fastener tightening specifications in alignment with fastening standards.
Support design reviews to ensure proper accessibility, serviceability, and manufacturing feasibility of joints.
Collaborate with Manufacturing/Plant teams and Tooling/Equipment engineers to ensure fastening processes can be implemented reliably in the plant.
Assist with correlation and validation activities, including torque-tension testing, joint audits, and plant torque correlation studies.
Document lessons learned and contribute to continuous improvement of fastening standards, guidelines, and checklists.
Participate in issue resolution activities related to fastener failures, loosening, warranty concerns, or assembly problems, supporting root cause analysis and corrective actions.
Maintain accurate records of fastener data, torque specs, joint calculations, and change history in the appropriate systems.
Basic Qualifications (Requirements)
Bachelor’s degree in Mechanical Engineering, Automotive Engineering, Materials Engineering, or a closely related field.
Fundamental understanding of mechanics of materials (stress/strain, fatigue, preload, friction) and basic machine design.
Ability to read and interpret engineering drawings, GD&T, and basic CAD models.
Good analytical and problem-solving skills; comfortable with engineering calculations and use of engineering calculation tools.
Strong communication skills to work with cross-functional teams (Design, Manufacturing, Supplier Quality, Plants).
Willingness to learn GM fastening standards, tools, and procedures and apply them consistently.
Preferred Qualifications
Co-op, internship, or project experience involving bolted joints or torque tightening assembly processes.
Familiarity with fastener standards (e.g., metric property classes, strength tables, torque-tension principles).
Exposure to manufacturing environments utilizing mechanical fasteners (vehicle assembly, body shop, powertrain, or component plants).
Experience using basic analysis tools or calculators for torque-tension or joint design (even academic).
GM DOES NOT PROVIDE IMMIGRATION-RELATED SPONSORSHIP FOR THIS ROLE. DO NOT APPLY FOR THIS ROLE IF YOU WILL NEED GM IMMIGRATION SPONSORSHIP NOW OR IN THE FUTURE. THIS INCLUDES DIRECT COMPANY SPONSORSHIP, ENTRY OF GM AS THE IMMIGRATION EMPLOYER OF RECORD ON A GOVERNMENT FORM, AND ANY WORK AUTHORIZATION REQUIRING A WRITTEN SUBMISSION OR OTHER IMMIGRATION SUPPORT FROM THE COMPANY (e.g., H-1B, OPT, STEM OPT, CPT, TN, J-1, etc.)
GM does not provide immigration-related sponsorship for this role. Do not apply for this role if you will need GM immigration sponsorship now or in the future. This includes direct company sponsorship, entry of GM as the immigration employer of record on a government form, and any work authorization requiring a written submission or other immigration support from the company (e.g., H1-B, OPT, STEM OPT, CPT, TN, J-1, etc). This role is categorized as hybrid. This means the selected candidate is expected to report to a specific location at least 3 times a week {or other frequency dictated by their manager}. Relocation benefits are available for candidates who qualify under company policy.
About GM
Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all.
Why Join Us
We believe we all must make a choice every day – individually and collectively – to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team.
Benefits Overview
From day one, we're looking out for your well-being–at work and at home–so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources .
Non-Discrimination and Equal Employment Opportunities (U.S.)
General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers.
All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws.
We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire .
Accommodations
General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us or call us at View phone number on ev.careers. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

Apply

Vacancy posted 6 days ago

Similar jobs that could be interesting for youBased on the Design and Release Engineering- Fastening in Michigan vacancy

Design and Release Engineering- Fastening
...product teams are redefining mobility. Through a human-centered design process, we create vehicles and experiences that are designed... ...of transportation on a global scale..About the role:The Fastening Engineer supports the design, selection, and validation of mechanical...
Suggested
Full time
Internship
H1b
Local area
Work from home
Relocation
Relocation package
3 days per week
General Motors
Center Line, MI
4 days ago
Design Release Engineer - Body Exterior
...as you are.Group Summary:As an engineering and manufacturing partner, Magna... ...Body is responsible for the design, development, integration, validation, and release of vehicle body and exterior components... ..., composites, machine parts, fasteners, joining techniques, paint,...
Suggested
Full time
Local area
Magna International
Troy, MI
2 days ago
Senior Design Release Engineer
...unique as you are.Group Summary:As an engineering and manufacturing partner, Magna’s Complete... ...: ABOUT THE ROLEThe Senior Design & Release Engineer leads the design, development... ...adhesive selection, threaded/riveted/clip fastening, Class A painting, and corrosion protection...
Suggested
Full time
Local area
Magna International
Troy, MI
3 days ago
Design Release Engineer
...Role- Design Release Engineer Location- Auburn Hills, MI Exp- 3-4 years Responsibilities : Design & Development... ..., NVH, Sealing systems, structural analysis, vibration, fastener basics, CAE Analysis, and GD&T. Experience in...
Suggested
Work experience placement
United IT Solutions
Pontiac, MI
3 days ago
Design Release Engineer, Interior Trim
...refusing to choose between performance and sustainability, design and engineering, ambition and integrity. In Lucid Air and Lucid Gravity, we... ...mobility.We are seeking a highly skilled and motivated Design Release Engineer to join our world-class Interior Components and...
Suggested
Hourly pay
Lucid Motors
Southfield, MI
2 days ago
Engineering Group - Design Release Engineering
Job DescriptionThe Senior Design Release Engineer (DRE) leads the design, engineering, integration, release, and lifecycle management of airbag module and seat belt Corporate Common Components (CCC) hardware across vehicle programs. This role requires strong technical judgment...
Full time
Local area
Work from home
Relocation
Relocation package
General Motors
Warren, MI
1 day ago
P101015 Design & Release Engineer (DRE) - Interior Cockpit - Contract
Job-ID33153317Reference26-03230Job Title: (P101015 Design & Release Engineer (DRE) - Interior Cockpit - Contract)About Kyyba:Founded in 1998 and headquartered in Farmington Hills, MI, Kyyba has a global presence delivering high-quality resources and top-notch recruiting...
Contract work
Work at office
Kyyba
Troy, MI
4 days ago
Design Release Engineer - Seat Components
...Motors, we are redefining mobility through human-centered design and advanced engineering. Our teams create vehicles and experiences that go beyond... ...definition, design, engineering development, product release, launch, and technical leadership for seating system components...
Full time
H1b
Local area
Work from home
Relocation
3 days per week
General Motors
Warren, MI
14 hours ago
Design Release Engineer - Full-Size Truck Suspension
Job DescriptionAs a Design Release Engineer, you will own the design, release, integration, and lifecycle management of suspension hardware for full-size truck vehicle programs. You will be accountable for delivering robust suspension systems that meet vehicle-level targets...
Full time
Local area
Work from home
General Motors
Center Line, MI
14 hours ago
Design Release Engineer - Bumper, Grille, Fascia, and Exterior Trim
...redefining mobility. Through a human-centered design process, we create vehicles and... ...offers opportunities across a spectrum of engineering. These product engineering positions involve... ..., and testing. These roles require a release engineer to lead or participate in a multi...
Full time
H1b
Local area
Work from home
Relocation package
3 days per week
General Motors
Center Line, MI
14 hours ago
Senior Design Release Engineer - Vehicle Closures
...product teams are redefining mobility. Through a human-centered design process, we create vehicles and experiences that are designed... ...transportation on a global scale.The RoleThe Senior Design Release Engineer (DRE) leads the design, engineering, and release of closure...
Full time
Local area
Work from home
Relocation
Relocation package
General Motors
Center Line, MI
1 day ago
Design Release Engineer - Active Thermal Hardware
...product teams are redefining mobility. Through a human-centered design process, we create vehicles and experiences that are designed... ...of transportation on a global scale.The RoleAs a Design Release Engineer (DRE) for Active Thermal Hardware, you will lead the design,...
Full time
Local area
Work from home
Relocation
Relocation package
General Motors
Warren, MI
4 days ago
Mechatronic Design and Release Engineer - In-Vehicle Infotainment
$65.1k - $166.2k
In this position...The Mechatronic Design and Release Engineer is responsible for the development and integration of critical infotainment and connectivity systems, including the IVI ECU (with displays and touchscreens), gateway modules, and the telematics modem (cellular...
Immediate start
Flexible hours
Ford
Dearborn, MI
14 hours ago
Design and Release Engineer -Seat Structure
...Motors, we are redefining mobility through human-centered design and advanced engineering. Our teams create vehicles and experiences that go beyond... ...the Role:The Senior Rear Seat Structure Design Release Engineer is the technical owner for rear seat structures...
Permanent employment
Full time
H1b
Local area
Work from home
Relocation
Relocation package
3 days per week
General Motors
Center Line, MI
14 hours ago
Design Release Engineer - Instrument Panel Structure
...product teams are redefining mobility. Through a human-centered design process, we create vehicles and experiences that are designed... ...on a global scale.About the role:As an Interior Design Release Engineer, you will help develop the instrument panel (IP) structures that...
Full time
Part time
H1b
Local area
Work from home
Relocation
Relocation package
3 days per week
General Motors
Warren, MI
3 days ago
BMS Design & Release Engineer
$99.1k - $166.2k
...electrification initiatives, we are seeking technically strong engineers who can help establish the foundation for our product... ...and vehicle readiness.In this position... This is an expanded design and release (DR) role. The BMS Design Release and Technical Delivery Engineer...
Immediate start
Flexible hours
Ford
Dearborn, MI
23 hours ago
Senior Design Release Engineer - Exterior Hardware and Sunroofs
...redefining mobility. Through a human-centered design process, we create vehicles and... ...Modules, Latches, Inside/Outside Handles, Release Cables, Window Regulators, Struts, Actuators... ...level verification and validationAuthor Engineering Work Orders for prototype and production...
Full time
Local area
Work from home
Relocation
Relocation package
General Motors
Center Line, MI
14 hours ago
Design and Release Engineer - Halfshafts/Driveshafts
...assigned driveshaft and/or halfshafts and will execute product design, analysis, release and testing per technical infrastructure and Stellantis... ...components or assemblies as assignedCoaching entry level engineers as requiredRecognized as single point leadership contact...
Immediate start
Stellantis
Auburn Hills, MI
1 day ago
Electrical Design Release Engineer - GM Defense
...government markets. GM Defense combines General Motors’ proven engineering and manufacturing capabilities with the mission focus and... ...defense customers.The RoleGM Defense is seeking an Electrical Design Release Engineer to independently own the design, development,...
Permanent employment
Full time
Local area
Work from home
Relocation
Relocation package
General Motors
Center Line, MI
14 hours ago
Design Release Engineer
...Job Title: Design release Engineer (Door Trims & Console) Location: Auburn Hills, MI Interface with Vehicle Engineering, suppliers, Purchasing, Quality and Assembly Plants. Manage product performance to meet functional, cost, weight, and investment targets....
Pentangle Tech Services | P5 Group
Auburn Hills, MI
4 days ago
Mule Wiring Design Release Engineer
...Mule Wiring Design & Release Engineer The Mule Wiring Design & Release Engineer is responsible to lead the design of wire harness and electrical distribution systems while working with supplier CAD and Engineering Support teams, global Engineering, Program Management...
Work experience placement
Omni Inclusive
Auburn Hills, MI
2 days ago
Design Release Engineer
...Design Release Engineer Description: The Design and Release Engineer - will be responsible for developing components/systems from initial design concept through full volume production. The Design and Release Engineer will provide feasibility input for development...
Work at office
3B Staffing LLC
Pontiac, MI
4 days ago
Design Release Engineer
...Design Release Engineer Develop and validate injection molded interior components, collaborate on design for manufacturing, and support prototype testing processes. Job #136909 Manufacturing Warren, Michigan Apply Now Talascend is currently seeking a...
Contract work
Talascend
Troy, MI
4 days ago
Design Release Engineer
$54 - $56 per hour
...Job Title: Design Release EngineerJob Description As an Interior Design Release Engineer (DRE), you will serve as a technical authority in vehicle instrument panels, specifically focusing on the Cross Car beam and other IP structures under the dash. You will lead the...
Contract work
Temporary work
Part time
Work at office
Remote work
Monday to Friday
Actalent
Warren, MI
4 days ago
Design Release Engineer
...Job Description DUTIES : Designs, develops, implements, and analyzes technical products and systems. Performs engineering design evaluations and develops a range of products... ...robust technical solutions are developed and released for each phase of the program. Develops...
Work at office
Local area
Remote work
Work from home
General Motors
Warren, MI
3 days ago
Design & Release Engineer
$44 - $45 per hour
...Location: Dearborn, Michigan Type: Contract Job #106053 Job Title: Design & Release Engineer - Rocker Moldings Location: Dearborn, MI - Hybrid (4 Days Onsite: Monday through Thursday) Job Type: W2 Contract Expected hours per week: 40 hours per...
Hourly pay
Contract work
Monday to Thursday
EPITEC
Dearborn, MI
2 days ago
Design & Release Engineer
...Design & Release Engineer (Contract) Auburn Hills, MI, United States (On-site) Contract (3 months 6 days) Published a month ago cad change management DFMEA We are seeking an intermediate Design and Release Engineer. This role involves working closely with cross-functional...
Contract work
Kasmo Global
Auburn Hills, MI
3 days ago
Design Release Engineer
...Automotive Body/Exterior Components Engineer Develop and release automotive body/exterior components for ICE and EV programs from concept through production. Create and evaluate design concepts considering functional requirements, vehicle packaging, and manufacturability...
Solize
Livonia, MI
23 hours ago
Design Release Engineer - Hard Trim & Overhead Systems
Job DescriptionDesign Release Engineer - Interior Hard Trim and Overhead SystemsAt General Motors, we are building on our momentum and are... ...About the Interior Role: As a Hard Trim and Overhead Systems Design Release Engineer (DRE), you will be responsible to develop and...
Full time
Local area
Work from home
General Motors
Center Line, MI
2 days ago
Senior Software Design Release Engineer
...Job Description The Software Design Release Engineerrepresentsan exciting and challenging leadership position related to the development... ...-components. The role requires a balanced mix of technical engineering skills and leadership skills, where you will havea high...
Local area
Work from home
Relocation
Relocation package
General Motors
Michigan
1 day ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Design and Release Engineering- Fastening. Be the first to apply!