Fabricator
EMCOR Group
About Us
We are one of the largest mechanical, electrical, and plumbing contractors in Indiana and among the preeminent specialty contractors in the nation. We specialize in a full range of new and retrofit construction for industrial, food processing, commercial, institutional, healthcare, pharmaceutical, and bio-fuel projects.
Job Summary
Shambaugh & Son is seeking a Fabricator for the Fire Fabrication Shop. In this position you will be responsible for fabricating pipe for fire protection systems.
#shambaugh #ppf #LI-TS #LI-onsite
Essential Duties & Responsibilities
Use various machinery
Study and interpret assembly instructions
Listen to directions from supervisors
Fabricate and assemble pipe per instructions
Read parts list and determine if all parts are present
Assemble tools, materials, and various components
Interpret measurements
Verify specifications
Ensure all parts are fitted and screwed in properly
Resolve assembly and production issues, with managements assistance
Troubleshoot malfunctions and perform repairs as needed
Ensure working environment is clean and safe
Report errors in production
Other duties as assigned
Qualifications
Read a tape measure down to a ¼".
Be dependable
Good attendance and a positive attitude are critical for this position
Good work ethic and a willingness to learn
Must be able to communicate ideas, thoughts, etc. both verbally and in written form
Must be able to work Saturday (will count against attendance record if missed).
Must be 18 years or older
Attention to detail
Ability to follow directions and communicate with others
Ability to push, pull, or lift up to 50 lbs regularly
Ability to stand, bend, twist, and walk for 8-12 hour shifts
Regular and reliable attendance, including the ability to work extended hours and weekends as required
Equal Opportunity Employer
As a leading provider of mechanicaland electrical construction, facilities services, and energy infrastructure,we offer employess a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and sucess. Equal Oppurtunity Employer/Veterans/Disabled.
Affirmative Action Policy
Please review ourAffirmative Action Policy ( .
Notice to Prospective Employees
Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companieslist open positions here ( . Please check our available positions to confirm that a post or email is genuine.
EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.
Email a Friend Email a Friend
Software Powered by ICIMS (
Job Locations US-AL-Trinity
ID 2025-2201
Company Shambaugh & Son, L.P.
Category Fabrication
Position Type Full-Time
Location Type Onsite
Posted Date 12 months ago (10/14/2025 1:30 PM)
- ...Fabricator Shambaugh & Son is seeking a Fabricator for the Fire Fabrication Shop. In this position you will be responsible for fabricating pipe for fire protection systems. Essential Duties & Responsibilities Use various machinery Study and interpret assembly...SuggestedShift workWeekend work
$21.75 per hour
...commercial, institutional, healthcare, pharmaceutical, and bio-fuel projects. Job Summary Shambaugh & Son is seeking a 2nd Shift Fabricator for the Fire Fabrication Shop. In this position you will be responsible for fabricating pipe for fire protection systems....SuggestedHourly payFor contractorsShift workWeekend workAfternoon shift- ...EMCOR Group - 2000 Cooperage Way - Responsibilities: Fabricate and assemble fire-protection pipe per instructions; Use various machinery; Read parts list and determine if all parts are present; Interpret measurements and ensure parts fitted and screwed in properly; Troubleshoot...SuggestedAfternoon shift
- ...First Shift Fabricator Primetals Technologies USA, LLC is a leading partner for engineering, plant construction and lifecycle services in the metal industry. We provide innovative and practical solutions to support our customers with long-term sustainability goals...SuggestedWorldwideFlexible hoursDay shift
- ...We have an opening for a Sign Fabricator position working at a custom sign shop located in Hartselle, AL . This is an evaluation-to-hire opportunity with potential for full-time placement. *** A VALID DRIVER’S LICENSE IS REQUIRED *** Skills/Qualifications A valid Driver...SuggestedFull time
$20 - $21.75 per hour
2nd Shift Fabricator We are currently seeking Fabricators for a growing manufacturing facility in Trinity, AL. This position is responsible for reading blueprints, measuring materials, operating fabrication equipment, and assembling metal components to meet quality...Weekly payFull timeTemporary workAfternoon shift$24.56 per hour
...Job SummaryShambaugh & Son L.P. is looking for a 1st Shift Welder in our Fire Fabrication shop. In this position, you will be responsible for using a universal welder to make cuts and welds on steel pipe.Essential Duties & ResponsibilitiesRead blueprints and drawingsTake...Hourly payWeekend workDay shift$24.56 per hour
...Job Summary Shambaugh & Son L.P. is looking for a 1st Shift Welder in our Fire Fabrication shop. In this position, you will be responsible for using a universal welder to make cuts and welds on steel pipe. Essential Duties & Responsibilities Read blueprints...Hourly payShift workWeekend workDay shift- ...Job Description Job Description We are looking for a skilled Metal Fabricator with Python programming experience to join our dynamic team.As a Metal Fabricator with Python Experience, you will be responsible for fabricating and assembling metal structures and components...Local area
$22 - $25 per hour
...hour (Based on Experience) Employment Type: Temp-To-Hire Position Summary We are seeking a skilled Fitter Welder to join our fabrication team on 2nd shift. This position is responsible for laying out, fitting, aligning, and tack welding pipe components in...Hourly payFull timeTemporary workMonday to FridayShift workAfternoon shift- ...Fabrication And Assembly TechnicianProject Location(s): Decatur, AL 35603 USAMinimum Years Experience: 1 years of experience in fabrication shop or similar environment required or equivalent combination of education, training, and experienceTravel Involved: None/Not SpecifiedJob...Permanent employmentContract workTemporary workFor contractorsFor subcontractorImmediate start
$26 - $29 per hour
...Welder Pay: $26-$29 HR/DOE | Location: Decatur, AL| Weekly Pay | Full Benefits Join a team specializing in precision fabrication and security installations. This contract role offers steady work, competitive pay of $26-$29 per hour, and projects throughout Decatur...Hourly payWeekly payContract workLocal area$32 per hour
...and mills and moreClean slag between passesInspect finished beads for defectsGrind or prep joints as requiredAssist with fitting, fabrication, installation, and other general outage workRequirements:Must have OSHA 10; TI can provide training for qualified...Work at officeImmediate startDay shift$26 per hour
...WelderTrillium Construction is seeking Flux Core Welders for a fabrication shop in Decatur, Alabama. This is a full-time opportunity. Pay rate for the welders that meet the qualifications is $26+ depending on experience and skillset. Candidates that can also fit and fabricate...Daily paidFull time- ...our fleet of trailers and containers to ensure roadworthiness and compliance with DOT guidelines. You will use your welding and fabrication skills to complete structural repairs or rebuilds on floors, side walls, doors, landing gear, etc. and may assist with regular maintenance...Monday to Friday
$32 per hour
...more Clean slag between passes Inspect finished beads for defects Grind or prep joints as required Assist with fitting, fabrication, installation, and other general outage work Requirements ~ Must have OSHA 10; TI can provide training for qualified...Work at officeImmediate startDay shift- ..."ownership" mindset and be ultimately responsible for the success or status of the respective assigned work.Be knowledgeable of fabricating components as related to steel fabrication (meeting the minimum for SSCI industry standards).Assist the Foreman/Supervisor with meeting...For contractorsApprenticeshipWork at office
$26 per hour
...Alabama - Posted on September 30, 2026 Published By Camille Baker Trillium Construction is seeking Flux Core Welders for a fabrication shop in Decatur, Alabama. This is a full-time opportunity.Pay rate for the welders that meet the qualifications is $26+...Daily paidFull time$32 per hour
...more Clean slag between passes Inspect finished beads for defects Grind or prep joints as required Assist with fitting, fabrication, installation, and other general outage work Responsibilities ~ Must have OSHA 10; TI can provide training for qualified...Work at officeImmediate startDay shift$30 - $36 per hour
...on welding department leader, overseeing a team of approximately four to six welders supporting aerospace, defense, and precision fabrication projects. This role combines frontline MIG welding with day-to-day leadership responsibilities, including driving production,...Contract workTemporary workShift work$28 - $32 per hour
...Overview We are seeking skilled Structural Welders and Fitters to join our team. The ideal candidate will be responsible for fabricating, welding, and assembling structural components with precision and adherence to safety standards. This role requires a strong understanding...Afternoon shift- Your Job Do you like working in production? Do you take pride in your work... getting the job done on time... and providing a vital service? If so, then we want to talk to you about an opportunity as Assembler. Your Day Assembler responsibilities may include the...Night shiftAfternoon shift
$18.67 per hour
Benefits: Dental insurance Health insurance Paid time off Training & development Job Title: Pack Out Assembler Location: Decatur, AL Pay: $18.67 Shift: 2nd shift (Monday-Thursday 3:30pm-2:00am) (Friday 1:30pm-10:00pm) POSITION SUMMARY: Perform processes...Contract workZero hours contractShift workAfternoon shift- Karman Space & Defense is a leader in the rapid design, development, and production of critical, next-generation system solutions that align with the U.S. Department of War and its allies' core mission priorities, and meet the accelerating demand for access to space. Building...Permanent employmentTemporary workFor contractorsMonday to FridayFlexible hoursShift work
$21 - $26 per hour
Aerospace AssemblerWe are seeking detail-oriented Aerospace Assembly Technicians to support a growing aerospace and defense manufacturer in Decatur, AL. In this role, you assemble precision aerospace components and flight hardware while maintaining strict quality, safety...Contract workTemporary workFor contractorsShift workDay shiftAfternoon shift$20 per hour
...detail-oriented, and takes pride in doing quality work. MANUFACTURING ASSEMBLY TECHNICIAN RESPONSIBILITIES Assemble and fabricate products using hand tools and basic power tools. Measure, cut, fit, and secure materials according to specifications. Follow...Hourly payFull timeWork experience placement$32 per hour
...Use hand-welding or flame-cutting equipment to weld or join metal components (pipe) or to fill holes, indentations, or seams of fabricated metal products. WELD TEST REQUIREMENTS IN 6G POSITION: ~6" SCH 40 SMAW ~2" SCH 80 CARBON TIG ~2" STAINLESS SCH 40...Daily paidRelocation- ..., ensuring precision and adherence to NCCER and industry standards. This role involves mentoring junior welders, troubleshooting fabrication issues, and leading weld quality assurance efforts. Supervisory Responsibilities: May assist in training and mentoring Level...Local areaDay shift
- G.A. West & Co. is hiring Pipe Welders in Decatur, AL. These assignments are expected to last anywhere from 4-6 months, possibly longer. More details below: Must be able to understand weld symbols and drawings Diagnose malfunctioning welding machine, flux...Local area
- Job Description Job Description High End Manufacturing Plant Needing Pipe Welders! Interview today and start tomorrow!! Second Shift Position - Daily Overtime. Shift Differential is Paid. Qualifications: Must have 2 years pipe welding experience Proficiency...Immediate startShift workAfternoon shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Fabricator. Be the first to apply!


