Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Quality Control Inspector (Fabrication & Assembly)

Butcher Power Products

Position Summary The QC Inspector — Fabrication/Assembly is responsible for in-process quality inspection at BPP’s production facilities. Each Inspector carries primary responsibility for one facility (Fabrication or Assembly) while maintaining the ability to float to the other as workload and coverage needs require. This role performs in-process inspections at defined critical points in the production workflow, conducts incoming material inspections, documents and initiates nonconformances, and performs final QC inspection before product ships to customers or transfers to Assembly (Fabrication Inspector only). The QC Inspector reports to the QC Manager and works in coordination with the Quality Engineer to ensure defects are identified and contained as early as possible in the production process. Essential Duties And Responsibilities In-Process Inspection — Primary Facility Perform in-process quality checks at defined critical points in the production workflow at the primary assigned facility. Verify dimensional, visual, and workmanship requirements against drawings, specifications, and work instructions. Identify, document, and segregate nonconforming product. Apply hold tags, initiate NCRs, and notify the QC Manager or Quality Engineer of nonconformances. Record inspection results and maintain inspection documentation. Fabrication Inspector: perform final QC inspection before product ships to customers or transfers to Assembly, per applicable pre-shipment inspection procedures. Incoming Material Inspection Conduct incoming material inspections per procedures established by the Quality Engineer. Verify material certifications, Certificates of Conformance (COCs), and supplier documentation against purchase order requirements. Identify and segregate nonconforming incoming material. Document findings, initiate NCRs as applicable, and escalate to the Quality Engineer or QC Manager. Support the transition of incoming inspection responsibility from Production to Quality. Cross-Facility Float Coverage Float to the secondary facility as workload and coverage needs require, providing inspection continuity during absences or volume peaks. Perform in-process quality checks per defined inspection criteria at the secondary facility. Identify, document, and segregate nonconforming product at Assembly. Apply hold tags, initiate NCRs, and notify the Quality Engineer or QC Manager. Documentation & Reporting Complete all required inspection records, logs, and checklists accurately and in a timely manner. Document and initiate NCRs; escalate to the Quality Engineer or QC Manager with clear documentation of the nonconformance. Provide input on recurring defect patterns observed at Fabrication and incoming inspection. Support data collection for rework tracking by origin (Fabrication vs. Assembly) to build the quality cost baseline. Qualifications Required 2+ years of experience in quality inspection or quality control in a manufacturing environment. Ability to read and interpret engineering drawings, blueprints, and specifications. Familiarity with basic measurement tools (calipers, micrometers, tape measures, gauges). Strong attention to detail and ability to identify workmanship defects. Ability to clearly document findings in writing. Comfortable working across both shop Fabrication and Assembly environments. Ability to work independently with minimal supervision. High school diploma or equivalent. Preferred Associate’s degree or technical certification in manufacturing, quality, or related field. Experience in electrical equipment, switchgear, panel, or metal fabrication manufacturing. UL 891 certification or experience. Familiarity with ISO 9001 Quality Management Systems. Experience with incoming material inspection and supplier documentation review. ASQ Certified Quality Inspector (CQI) or Certified Quality Technician (CQT). Experience with ERP/MRP systems. Forklift certification or willingness to obtain. #J-18808-Ljbffr

Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the Quality Control Inspector (Fabrication & Assembly) in Rancho Cordova, CA vacancy
  • $27 - $39 per hour

     ...To help achieve these efforts, Stratolaunch is seeking a Quality Assurance Inspector at our facility in Mojave, CA. In this role, the individual...  ...support all quality aspects of the vehicle manufacturing assembly-line, to include evaluating the quality of Stratolaunch part... 
    Suggested

    Stratolaunch

    Sacramento, CA
    3 days ago
  • $30 - $35 per hour

     ...Martin, Northrop Grumman, and Raytheon. Position Summary: Quality Control Inspector inspects products for compliance with MLS processes, procedures...  ...tasks (documentation reviews, hardware inspection, assembly inspection, tests validation, etc. Using blueprints (2D drawings... 
    Suggested
    Permanent employment
    Contract work
    For contractors
    Work experience placement

    Marvin Engineering

    Sacramento, CA
    3 days ago
  • $25.87 - $32.55 per hour

     ...requiring basic GD&T knowledge and other Quality Control applications. Ensure compliance to MEC...  ...GD&T. Visual inspection of mechanical assemblies, soldering, and paint finishes, in...  ...Five years minimum experience as a QC inspector Certifications in relevant American Society... 
    Suggested
    Permanent employment
    Contract work
    For contractors
    Work experience placement
    Work at office

    Marvin Engineering

    Sacramento, CA
    1 day ago
  • $34 - $40 per hour

     ...Role Overview Machina Labs is seeking a Quality Inspector to support and lead inspection...  ...driven decisions. Must meet U.S. export control (ITAR) requirements. Preferred Qualifications...  ...up to 50 lbs. and work around large assemblies. Flexibility to support extended hours... 
    Suggested
    Weekend work

    Machina Labs

    Sacramento, CA
    1 day ago
  • $20.8 - $29.9 per hour

     ...The QA Inspector II will report directly to the QA Supervisor or...  ...of finished products and sub-assemblies. This role is expected to model...  ...orders to determine quality status and support manufacturing...  ...setting work experience within a controlled Quality environment... 
    Suggested
    Hourly pay
    Work experience placement
    Worldwide
    Flexible hours

    Repligen

    Sacramento, CA
    1 day ago
  • $22 - $30 per hour

     ...Experienced Quality Inspector - Aerospace #25-373 Vista, California, United States Apply X Facebook...  ...of raw materials, components, and sub-assemblies as per Drawings, Quality Process...  ...data to be logged on Statistical Process Control Charts. Maintain the integrity of... 
    Full time
    Flexible hours

    HEICO

    Sacramento, CA
    1 day ago
  •  ...Job Description Job Description Freelance On-Site Quality Inspector – Electrical Parts Supplier Position: On Source Quality Inspector (Electrical...  ...inspections of PCBs, wiring harnesses, connectors, cable assemblies, switches, relays, and electromechanical assemblies. Review... 
    Freelance

    Zobility

    Sacramento, CA
    1 day ago
  • $22 - $33 per hour

     ...,and internal alignment. SUMMARY As a Quality Inspector, you will play a critical role in ensuring...  ...asrequired. Perform inspections on assemblies and subassemblies at multiple stages...  ...conformities. Compliance with calibrated tool controls. All other responsibilities as... 
    Hourly pay
    Temporary work
    Work at office

    Redwire Space

    Sacramento, CA
    1 day ago
  • $75 - $85 per hour

     ...Electrical Inspector OpportunityWSP is currently initiating a search for an Electrical Inspector for our Antioch CA offices. The following locations will be considered: Ranco Cordova, Roseville, San Jose, San Francisco, Oakland. Be involved in projects with our Project... 
    Hourly pay
    Contract work
    For contractors
    Work at office
    Local area
    Relocation
    Flexible hours

    WSP

    Rancho Cordova, CA
    1 day ago
  • $40 - $50 per hour

     ...by shared values that are 100 years in the making - Safety, Quality, Honesty, Hard Work and Pride of Ownership. These values have...  ...matched 401(k) retirement plan. Position Summary The Quality Control Inspector will support construction quality assurance and documentation... 
    Hourly pay
    For contractors

    Murray Company Mechanical Contractors

    Sacramento, CA
    1 day ago
  •  ...Position Overview: As an Inspector I, you will work alongside other...  ...is critical in maintaining quality standards and supporting successful...  ...throughout production, assembly, and final acceptance to ensure...  ...to work in non-climate-controlled environments and inclement weather... 
    Contract work
    Afternoon shift
    Sacramento, CA
    8 days ago
  •  ...Fueled by rapid growth, we continue to expand our operations and capabilities. We are looking for a highly motivated, hands‑on Quality Inspector to help optimize production, drive innovation, and take our performance to the next level. About the Role This position plays... 
    Shift work
    Afternoon shift

    LA Gauge Company

    Sacramento, CA
    1 day ago
  •  ...marketplace. Our mission-driven team is seeking a bold and dynamic Quality Control Manager who is fueled by high ownership, execution...  ...role hires, coaches, and develops a high-performing team of inspectors, metrology technicians, and quality control leads, fostering... 
    Work at office
    Shift work
    Weekend work
    Afternoon shift

    Axiom Space

    Sacramento, CA
    4 days ago
  •  ...JOB OVERVIEW: The Quality Control Analyst I is responsible for performing routine QC testing of the MicroScan product line per predefined methods, preparing final product quality reports, and ensuring company, industry, and regulatory standards are met. This individual... 
    Work experience placement
    Work at office

    TechDigital Group

    West Sacramento, CA
    8 hours ago
  • $6,031 - $7,547 per month

    Audit Analyst at the California Department of Public Health seeks an experienced analyst to conduct onsite audits of healthcare facilities and assess compliance with state laws and regulations. The role analyzes complex staffing data and applies policies to determine staffing...
    Remote work

    California Department of Public Health

    Sacramento, CA
    1 day ago
  •  ...Program Quality Pre-Apprenticeship Analyst II Under the direction of the Program Planning & Review (PPR) Senior Apprenticeship Consultant...  ...location, please submit a separate application for each job control number. The incumbent works 40 hours per week in an office... 
    Apprenticeship
    Work at office
    Work from home

    California State Jobs

    Sacramento, CA
    4 days ago
  •  .../QC Manager will work closely with the project team to resolve quality issues to the satisfaction of the client. Position Location:...  ...the project management team Establish and document quality control procedures Initiate pre-installation meetings with subcontractors... 
    Full time
    Contract work
    For subcontractor
    Work at office

    Sbjames

    Sacramento, CA
    1 day ago
  • $30 - $40 per hour

     ...Job Description Job Description JOB TITLE: Quality Inspector II PAY RANGE : $30 - $40/hour | SHIFT: 1st SEE WHAT WE DO : - QUICK SUMMARY Prototek is seeking an experienced Quality Inspector II to support our manufacturing operations by performing in... 
    Permanent employment
    Temporary work
    Flexible hours
    Shift work
    Day shift

    Prototek Digital Manufacturing

    Rancho Cordova, CA
    22 days ago
  • $30 - $40 per hour

     ...JOB TITLE: Quality Inspector II PAY RANGE : $30 - $40/hour SHIFT: 1 st SEE WHAT WE DO : SUMMARY Prototek is seeking an experienced Quality Inspector II to support our manufacturing operations by performing in-process final and first article inspections... 
    Permanent employment
    Full time
    Temporary work
    Flexible hours
    Shift work
    Day shift

    Prototek Digital Manufacturing

    Rancho Cordova, CA
    2 days ago
  • The Quality Control Manager provides leadership, coordination, guidance, technical expertise in all areas of quality. The QCM is responsible for the overall daily operations of quality. This position develops and administers quality related policies, procedures, techniques... 
    Contract work
    For subcontractor

    CyberCoders

    Sacramento, CA
    2 days ago
  • $165k - $185k

     ...off on BU's polices and workflow changes to ensure optimal performance and alignment with regulatory requirements. • Review Quality Assurance/Control records to ensure compliance with regulations. • Be responsible for maintaining BU's performance and budget within set... 
    Full time
    Part time
    Work experience placement
    Monday to Friday
    Flexible hours

    Quest Diagnostics Incorporated

    Sacramento, CA
    1 day ago
  •  ...owned subsidiary of X-Bow Systems, Inc., is seeking a Quality Assurance Specialist/Inspector , responsible for operating coordinate measuring machines...  ...measure manufactured parts and components for quality control purposes. Duties/Responsibilities: Responsible... 
    Permanent employment
    Full time
    Shift work
    Weekend work

    Spencer Composites

    Sacramento, CA
    13 days ago
  • $90k - $130k

     ...environments requiring strict adherence to USACE, NAVFAC, and federal construction standards. We are currently seeking an experienced Quality Control Manager (QCM) to lead quality management on large federal construction projects, including military and government facilities.... 
    Hourly pay
    Full time
    Contract work
    For contractors
    For subcontractor
    Local area
    Weekend work
    Afternoon shift

    Bilbro Construction Company Inc.

    Sacramento, CA
    24 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Quality Control Inspector (Fabrication & Assembly). Be the first to apply!