Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Project Engineer IV - 8132

Temporary

ICSI.

Position: Senior Project Engineer IV 8132– Borger U40 FCC Reliability Improvement Project Position Type: W2 Contract-Per Diem-No Benefits
Position Location: Houston TX and Borger TX The Senior Project Engineer is a key member of the project team responsible for leading development and execution of the Borger U40 FCC Reliability Improvement Project from detailed design through construction, commissioning, startup, and handover. The Borger U40 project is a $140MM TIC capital project to replace the Unit 40 FCC converter and modernize the unit while maximizing reuse of the existing foundation and structure. The project is intended to improve safe and reliable operation of Unit 40 FCC, improve Borger Refinery operational availability by approximately 1%, and improve clean product yield by approximately 0.3%.

The execution plan spans 2026 detail design engineering, equipment and material procurement, and permitting; 2027 pre-turnaround construction and converter assembly; and 2028 turnaround execution, commissioning, startup, and handover. This role serves as the primary technical interface with the engineering contractor and works across a multidiscipline organization to align engineering, procurement, construction, operations, maintenance, reliability, process safety, and commissioning activities. During detailed design, the role is expected to be located in Houston at the engineering contractor’s office to enable close coordination and timely decision-making. The role will eventually transition to the Borger Refinery site for the construction phase and remain site-based during the March 2028 turnaround, commissioning, startup, and handover. The position ensures the project is delivered safely, with quality, and in accordance with scope, schedule, budget, operability, and regulatory requirements.
  • Direct the engineering contractor and manage compliance with contract requirements.
  • Lead preparation of technical scope, design basis, project specifications, and standards for contractor execution.
  • Coordinate review and acceptance of engineering deliverables, including drawings, specifications, calculations, models, vendor data, and discipline packages.
  • Manage technical deviations, change orders, RFIs, and resolution of design issues arising during engineering, fabrication, and field execution.
  • Monitor contractor performance for quality, progress, cost, schedule, constructability, and compliance with company procedures and CPMS requirements.
Be based in Houston at the engineering contractor’s office during detailed design to provide day-to-day technical direction, expedite decisions, and maintain close alignment on deliverables, model development, and issue resolution.
  • Coordinate internal and contractor discipline teams including process, mechanical, piping, civil/structural, electrical, instrumentation, controls, metallurgy, inspection, and process safety.
  • Manage interfaces among engineering, procurement, fabrication, construction, operations, maintenance, and business stakeholders to ensure aligned execution.
  • Lead technical reviews, model reviews, P&ID reviews, HAZOPs, risk reviews, and constructability reviews.
  • Engage corporate and site subject matter experts as required to resolve specialized technical, safety, reliability, and regulatory issues.
  • Work closely with the construction team and construction contractors to ensure engineering supports safe and efficient field execution.
  • Coordinate technical support during construction, installation, tie-ins, pre-commissioning, and mechanical completion.
  • Ensure constructability is incorporated into design and that field feedback is rapidly addressed.
  • Support resolution of field technical queries and ensure required contractor, vendor, and engineering responses are timely and complete.
Transition to the Borger Refinery site for construction execution and provide field leadership during the March 2028 turnaround, commissioning, startup, punch-list resolution, and system handover.
  • Collaborate with refinery operations, maintenance, reliability, and technical personnel to prepare the project for commissioning, startup, and handover.
  • Support development of commissioning plans, turnover plans, startup readiness activities, and pre-startup completion reviews.
  • Coordinate project responsibilities for PSSR, MOC, tie-in planning, OSBL coordination, and system handover documentation.
  • Ensure operations and maintenance participation in design reviews, procurement decisions, commissioning planning, and startup preparation.
  • Manage assigned scope to approved budget and schedule, while balancing quality, operability, safety, and cost.
  • Support development of estimates, schedules, scope documents, and project execution plans.
  • Implement project documentation, data management, and preservation practices.
  • Ensure compliance with applicable company standards, refining engineering practices, codes, permits, and regulations.
  • Lead lessons learned capture and project closeout activities for assigned scope.
  • Bachelor’s degree in Engineering from an accredited institution.
  • Significant project engineering experience in refining, petrochemical, or related process industries, including multidiscipline capital project execution.
  • Demonstrated experience interfacing with engineering contractors, EPC/EPCM firms, construction teams, and site stakeholders.
  • Strong understanding of project execution processes from FEL through detailed design, construction, commissioning, startup, and handover.
  • Strong technical, communication, leadership, and coordination skills in a multidiscipline environment.
  • Professional Engineer (PE) license.
  • Experience as a lead engineer with an engineering contractor or in an owner’s project team role on major capital projects.
  • Experience with refining unit revamps, brownfield execution, tie-ins, turnaround coordination, and startup support.
Experience supporting FCC unit modernization or major refinery turnaround work during both engineering office and site execution phases is preferred.
  • Working knowledge of company project management systems, project specifications, and refinery standards/practices.
  • Safety leadership
  • Contractor management
  • Multidiscipline coordination
  • Technical judgment
  • Constructability focus
  • Interface management
  • Schedule and cost awareness
  • Communication and stakeholder alignment
  • Problem solving and decision making
  • Commissioning and startup readiness
The Senior Project Engineer typically reports to the Project Manager and may also work under the direction of an Engineering Manager on large projects. The role works closely with discipline engineers, process engineers, project controls, procurement, construction, commissioning/PTO leads, refinery operations, maintenance, reliability, and contractor personnel.

Position: Senior Project Engineer IV 8132– Borger U40 FCC Reliability Improvement Project

Position Type: W2 Contract-Per Diem-No Benefits
Position Location: Houston TX and Borger TX The Senior Project Engineer is a key member of the project team responsible for leading development and execution of the Borger U40 FCC Reliability Improvement Project from detailed design through construction, commissioning, startup, and handover. The Borger U40 project is a $140MM TIC capital project to replace the Unit 40 FCC converter and modernize the unit while maximizing reuse of the existing foundation and structure. The project is intended to improve safe and reliable operation of Unit 40 FCC, improve Borger Refinery operational availability by approximately 1%, and improve clean product yield by approximately 0.3%. The execution plan spans 2026 detail design engineering, equipment and material procurement, and permitting; 2027 pre-turnaround construction and converter assembly; and 2028 turnaround execution, commissioning, startup, and handover. This role serves as the primary technical interface with the engineering contractor and works across a multidiscipline organization to align engineering, procurement, construction, operations, maintenance, reliability, process safety, and commissioning activities. During detailed design, the role is expected to be located in Houston at the engineering contractor’s office to enable close coordination and timely decision-making. The role will eventually transition to the Borger Refinery site for the construction phase and remain site-based during the March 2028 turnaround, commissioning, startup, and handover. The position ensures the project is delivered safely, with quality, and in accordance with scope, schedule, budget, operability, and regulatory requirements.
  • Direct the engineering contractor and manage compliance with contract requirements.
  • Lead preparation of technical scope, design basis, project specifications, and standards for contractor execution.
  • Coordinate review and acceptance of engineering deliverables, including drawings, specifications, calculations, models, vendor data, and discipline packages.
  • Manage technical deviations, change orders, RFIs, and resolution of design issues arising during engineering, fabrication, and field execution.
  • Monitor contractor performance for quality, progress, cost, schedule, constructability, and compliance with company procedures and CPMS requirements.
Be based in Houston at the engineering contractor’s office during detailed design to provide day-to-day technical direction, expedite decisions, and maintain close alignment on deliverables, model development, and issue resolution.
  • Coordinate internal and contractor discipline teams including process, mechanical, piping, civil/structural, electrical, instrumentation, controls, metallurgy, inspection, and process safety.
  • Manage interfaces among engineering, procurement, fabrication, construction, operations, maintenance, and business stakeholders to ensure aligned execution.
  • Lead technical reviews, model reviews, P&ID reviews, HAZOPs, risk reviews, and constructability reviews.
  • Engage corporate and site subject matter experts as required to resolve specialized technical, safety, reliability, and regulatory issues.
  • Work closely with the construction team and construction contractors to ensure engineering supports safe and efficient field execution.
  • Coordinate technical support during construction, installation, tie-ins, pre-commissioning, and mechanical completion.
  • Ensure constructability is incorporated into design and that field feedback is rapidly addressed.
  • Support resolution of field technical queries and ensure required contractor, vendor, and engineering responses are timely and complete.
Transition to the Borger Refinery site for construction execution and provide field leadership during the March 2028 turnaround, commissioning, startup, punch-list resolution, and system handover.
  • Collaborate with refinery operations, maintenance, reliability, and technical personnel to prepare the project for commissioning, startup, and handover.
  • Support development of commissioning plans, turnover plans, startup readiness activities, and pre-startup completion reviews.
  • Coordinate project responsibilities for PSSR, MOC, tie-in planning, OSBL coordination, and system handover documentation.
  • Ensure operations and maintenance participation in design reviews, procurement decisions, commissioning planning, and startup preparation.
  • Manage assigned scope to approved budget and schedule, while balancing quality, operability, safety, and cost.
  • Support development of estimates, schedules, scope documents, and project execution plans.
  • Implement project documentation, data management, and preservation practices.
  • Ensure compliance with applicable company standards, refining engineering practices, codes, permits, and regulations.
  • Lead lessons learned capture and project closeout activities for assigned scope.
  • Bachelor’s degree in Engineering from an accredited institution.
  • Significant project engineering experience in refining, petrochemical, or related process industries, including multidiscipline capital project execution.
  • Demonstrated experience interfacing with engineering contractors, EPC/EPCM firms, construction teams, and site stakeholders.
  • Strong understanding of project execution processes from FEL through detailed design, construction, commissioning, startup, and handover.
  • Strong technical, communication, leadership, and coordination skills in a multidiscipline environment.
  • Professional Engineer (PE) license.
  • Experience as a lead engineer with an engineering contractor or in an owner’s project team role on major capital projects.
  • Experience with refining unit revamps, brownfield execution, tie-ins, turnaround coordination, and startup support.
Experience supporting FCC unit modernization or major refinery turnaround work during both engineering office and site execution phases is preferred.
  • Working knowledge of company project management systems, project specifications, and refinery standards/practices.
  • Safety leadership
  • Contractor management
  • Multidiscipline coordination
  • Technical judgment
  • Constructability focus
  • Interface management
  • Schedule and cost awareness
  • Communication and stakeholder alignment
  • Problem solving and decision making
  • Commissioning and startup readiness
The Senior Project Engineer typically reports to the Project Manager and may also work under the direction of an Engineering Manager on large projects. The role works closely with discipline engineers, process engineers, project controls, procurement, construction, commissioning/PTO leads, refinery operations, maintenance, reliability, and contractor personnel.

Position: Senior Project Engineer IV 8132– Borger U40 FCC Reliability Improvement Project

Position Type: W2 Contract-Per Diem-No Benefits
Position Location: Houston TX and Borger TX The Senior Project Engineer is a key member of the project team responsible for leading development and execution of the Borger U40 FCC Reliability Improvement Project from detailed design through construction, commissioning, startup, and handover. The Borger U40 project is a $140MM TIC capital project to replace the Unit 40 FCC converter and modernize the unit while maximizing reuse of the existing foundation and structure. The project is intended to improve safe and reliable operation of Unit 40 FCC, improve Borger Refinery operational availability by approximately 1%, and improve clean product yield by approximately 0.3%. The execution plan spans 2026 detail design engineering, equipment and material procurement, and permitting; 2027 pre-turnaround construction and converter assembly; and 2028 turnaround execution, commissioning, startup, and handover. This role serves as the primary technical interface with the engineering contractor and works across a multidiscipline organization to align engineering, procurement, construction, operations, maintenance, reliability, process safety, and commissioning activities. During detailed design, the role is expected to be located in Houston at the engineering contractor’s office to enable close coordination and timely decision-making. The role will eventually transition to the Borger Refinery site for the construction phase and remain site-based during the March 2028 turnaround, commissioning, startup, and handover. The position ensures the project is delivered safely, with quality, and in accordance with scope, schedule, budget, operability, and regulatory requirements.
  • Direct the engineering contractor and manage compliance with contract requirements.
  • Lead preparation of technical scope, design basis, project specifications, and standards for contractor execution.
  • Coordinate review and acceptance of engineering deliverables, including drawings, specifications, calculations, models, vendor data, and discipline packages.
  • Manage technical deviations, change orders, RFIs, and resolution of design issues arising during engineering, fabrication, and field execution.
  • Monitor contractor performance for quality, progress, cost, schedule, constructability, and compliance with company procedures and CPMS requirements.
Be based in Houston at the engineering contractor’s office during detailed design to provide day-to-day technical direction, expedite decisions, and maintain close alignment on deliverables, model development, and issue resolution.
  • Coordinate internal and contractor discipline teams including process, mechanical, piping, civil/structural, electrical, instrumentation, controls, metallurgy, inspection, and process safety.
  • Manage interfaces among engineering, procurement, fabrication, construction, operations, maintenance, and business stakeholders to ensure aligned execution.
  • Lead technical reviews, model reviews, P&ID reviews, HAZOPs, risk reviews, and constructability reviews.
  • Engage corporate and site subject matter experts as required to resolve specialized technical, safety, reliability, and regulatory issues.
  • Work closely with the construction team and construction contractors to ensure engineering supports safe and efficient field execution.
  • Coordinate technical support during construction, installation, tie-ins, pre-commissioning, and mechanical completion.
  • Ensure constructability is incorporated into design and that field feedback is rapidly addressed.
  • Support resolution of field technical queries and ensure required contractor, vendor, and engineering responses are timely and complete.
Transition to the Borger Refinery site for construction execution and provide field leadership during the March 2028 turnaround, commissioning, startup, punch-list resolution, and system handover.
  • Collaborate with refinery operations, maintenance, reliability, and technical personnel to prepare the project for commissioning, startup, and handover.
  • Support development of commissioning plans, turnover plans, startup readiness activities, and pre-startup completion reviews.
  • Coordinate project responsibilities for PSSR, MOC, tie-in planning, OSBL coordination, and system handover documentation.
  • Ensure operations and maintenance participation in design reviews, procurement decisions, commissioning planning, and startup preparation.
  • Manage assigned scope to approved budget and schedule, while balancing quality, operability, safety, and cost.
  • Support development of estimates, schedules, scope documents, and project execution plans.
  • Implement project documentation, data management, and preservation practices.
  • Ensure compliance with applicable company standards, refining engineering practices, codes, permits, and regulations.
  • Lead lessons learned capture and project closeout activities for assigned scope.
  • Bachelor’s degree in Engineering from an accredited institution.
  • Significant project engineering experience in refining, petrochemical, or related process industries, including multidiscipline capital project execution.
  • Demonstrated experience interfacing with engineering contractors, EPC/EPCM firms, construction teams, and site stakeholders.
  • Strong understanding of project execution processes from FEL through detailed design, construction, commissioning, startup, and handover.
  • Strong technical, communication, leadership, and coordination skills in a multidiscipline environment.
  • Professional Engineer (PE) license.
  • Experience as a lead engineer with an engineering contractor or in an owner’s project team role on major capital projects.
  • Experience with refining unit revamps, brownfield execution, tie-ins, turnaround coordination, and startup support.
Experience supporting FCC unit modernization or major refinery turnaround work during both engineering office and site execution phases is preferred.
  • Working knowledge of company project management systems, project specifications, and refinery standards/practices.
  • Safety leadership
  • Contractor management
  • Multidiscipline coordination
  • Technical judgment
  • Constructability focus
  • Interface management
  • Schedule and cost awareness
  • Communication and stakeholder alignment
  • Problem solving and decision making
  • Commissioning and startup readiness
The Senior Project Engineer typically reports to the Project Manager and may also work under the direction of an Engineering Manager on large projects. The role works closely with discipline engineers, process engineers, project controls, procurement, construction, commissioning/PTO leads, refinery operations, maintenance, reliability, and contractor personnel.

Position: Senior Project Engineer IV 8132– Borger U40 FCC Reliability Improvement Project

Position Type: W2 Contract-Per Diem-No Benefits
Position Location: Houston TX and Borger TX The Senior Project Engineer is a key member of the project team responsible for leading development and execution of the Borger U40 FCC Reliability Improvement Project from detailed design through construction, commissioning, startup, and handover. The Borger U40 project is a $140MM TIC capital project to replace the Unit 40 FCC converter and modernize the unit while maximizing reuse of the existing foundation and structure. The project is intended to improve safe and reliable operation of Unit 40 FCC, improve Borger Refinery operational availability by approximately 1%, and improve clean product yield by approximately 0.3%. The execution plan spans 2026 detail design engineering, equipment and material procurement, and permitting; 2027 pre-turnaround construction and converter assembly; and 2028 turnaround execution, commissioning, startup, and handover. This role serves as the primary technical interface with the engineering contractor and works across a multidiscipline organization to align engineering, procurement, construction, operations, maintenance, reliability, process safety, and commissioning activities. During detailed design, the role is expected to be located in Houston at the engineering contractor’s office to enable close coordination and timely decision-making. The role will eventually transition to the Borger Refinery site for the construction phase and remain site-based during the March 2028 turnaround, commissioning, startup, and handover. The position ensures the project is delivered safely, with quality, and in accordance with scope, schedule, budget, operability, and regulatory requirements.
  • Direct the engineering contractor and manage compliance with contract requirements.
  • Lead preparation of technical scope, design basis, project specifications, and standards for contractor execution.
  • Coordinate review and acceptance of engineering deliverables, including drawings, specifications, calculations, models, vendor data, and discipline packages.
  • Manage technical deviations, change orders, RFIs, and resolution of design issues arising during engineering, fabrication, and field execution.
  • Monitor contractor performance for quality, progress, cost, schedule, constructability, and compliance with company procedures and CPMS requirements.
Be based in Houston at the engineering contractor’s office during detailed design to provide day-to-day technical direction, expedite decisions, and maintain close alignment on deliverables, model development, and issue resolution.
  • Coordinate internal and contractor discipline teams including process, mechanical, piping, civil/structural, electrical, instrumentation, controls, metallurgy, inspection, and process safety.
  • Manage interfaces among engineering, procurement, fabrication, construction, operations, maintenance, and business stakeholders to ensure aligned execution.
  • Lead technical reviews, model reviews, P&ID reviews, HAZOPs, risk reviews, and constructability reviews.
  • Engage corporate and site subject matter experts as required to resolve specialized technical, safety, reliability, and regulatory issues.
  • Work closely with the construction team and construction contractors to ensure engineering supports safe and efficient field execution.
  • Coordinate technical support during construction, installation, tie-ins, pre-commissioning, and mechanical completion.
  • Ensure constructability is incorporated into design and that field feedback is rapidly addressed.
  • Support resolution of field technical queries and ensure required contractor, vendor, and engineering responses are timely and complete.
Transition to the Borger Refinery site for construction execution and provide field leadership during the March 2028 turnaround, commissioning, startup, punch-list resolution, and system handover.
  • Collaborate with refinery operations, maintenance, reliability, and technical personnel to prepare the project for commissioning, startup, and handover.
  • Support development of commissioning plans, turnover plans, startup readiness activities, and pre-startup completion reviews.
  • Coordinate project responsibilities for PSSR, MOC, tie-in planning, OSBL coordination, and system handover documentation.
  • Ensure operations and maintenance participation in design reviews, procurement decisions, commissioning planning, and startup preparation.
  • Manage assigned scope to approved budget and schedule, while balancing quality, operability, safety, and cost.
  • Support development of estimates, schedules, scope documents, and project execution plans.
  • Implement project documentation, data management, and preservation practices.
  • Ensure compliance with applicable company standards, refining engineering practices, codes, permits, and regulations.
  • Lead lessons learned capture and project closeout activities for assigned scope.
  • Bachelor’s degree in Engineering from an accredited institution.
  • Significant project engineering experience in refining, petrochemical, or related process industries, including multidiscipline capital project execution.
  • Demonstrated experience interfacing with engineering contractors, EPC/EPCM firms, construction teams, and site stakeholders.
  • Strong understanding of project execution processes from FEL through detailed design, construction, commissioning, startup, and handover.
  • Strong technical, communication, leadership, and coordination skills in a multidiscipline environment.
  • Professional Engineer (PE) license.
  • Experience as a lead engineer with an engineering contractor or in an owner’s project team role on major capital projects.
  • Experience with refining unit revamps, brownfield execution, tie-ins, turnaround coordination, and startup support.
Experience supporting FCC unit modernization or major refinery turnaround work during both engineering office and site execution phases is preferred.
  • Working knowledge of company project management systems, project specifications, and refinery standards/practices.
  • Safety leadership
  • Contractor management
  • Multidiscipline coordination
  • Technical judgment
  • Constructability focus
  • Interface management
  • Schedule and cost awareness
  • Communication and stakeholder alignment
  • Problem solving and decision making
  • Commissioning and startup readiness
The Senior Project Engineer typically reports to the Project Manager and may also work under the direction of an Engineering Manager on large projects. The role works closely with discipline engineers, process engineers, project controls, procurement, construction, commissioning/PTO leads, refinery operations, maintenance, reliability, and contractor personnel.



 

Vacancy posted 5 days ago
Similar jobs that could be interesting for youBased on the Project Engineer IV - 8132 in Houston, TX vacancy
  •  ...company has an opportunity for an Instrumentation & Controls Engineer IV, to join our team in Houston, TX. At Bowman, we believe in...  ...excellence in the execution of instrumentation and control engineering projects. Responsibilities: Perform equipment sizing & selection,... 
    Suggested

    RPT Alliance

    Houston, TX
    5 days ago
  •  ...Role: Engineer IV (Utility Design – PE Licensed) Location: Houston, TX (CNP Tower) – Onsite 4 Days/Week (Remote Fridays) Duration:...  ...and develop engineering solutions for utility infrastructure projects (gas, electric, transmission, or distribution systems) Perform... 
    Suggested
    Contract work
    Local area
    Remote work
    1 day per week

    Centraprise Global

    Houston, TX
    more than 2 months ago
  • $65 - $70 per hour

     ...Job Description Job Description Title: Electrical Engineer IV Location: Houston, TX 77079 Duration: 12 Months #8702 Pay Rate...  ...and controls design of expansion and maintenance capital projects executed by third party engineering firms to ensure compliance... 
    Suggested

    IntelliPro Group Inc.

    Houston, TX
    2 days ago
  •  ...(NYSE:PWR) company, is based in Channelview, TX and provides engineering, design, procurement, construction and support services to the...  ...terminal industries throughout the country. We offer individual project services as well as turnkey EPC project implementation.... 
    Suggested
    Permanent employment
    Full time
    Work at office
    Local area
    Immediate start

    Quanta Services

    Houston, TX
    3 days ago
  •  ...of the impact we create together. Join us and help run what runs the world.This position reports to:Electrical Engineering Manager__ABB is seeking a Project Engineer with a background in Power Systems to join our team. Working at ABB offers a unique opportunity to gain... 
    Suggested
    Hourly pay
    Full time
    Temporary work
    For subcontractor
    Monday to Friday

    ABB

    Houston, TX
    4 days ago
  •  ...We are seeking a Lead Project Engineer (Power Systems) to serve as a key technical expert and contributor within our Engineering and Consulting team. In this role, you will execute complex power system studies, substation design and EPC bids, enhance technical capabilities... 
    Full time
    Contract work
    For subcontractor

    Powell Industries

    Houston, TX
    19 hours ago
  •  ...Description: Position Summary: Responsible for coordination of all technical activities on assigned projects. Plans, schedules, conducts, and coordinates assigned engineering work; monitors work for compliance to applicable FAA/EASA regulations, customer requirements,... 
    Contract work
    Overseas

    Recaro Aircraft Seating Americas, Inc.

    Houston, TX
    3 days ago
  •  ...JSG is seeking a Project Engineer for a direct hire, onsite position for our established commercial electrical contractor client's Telecom division in the Houston area. DESCRIPTION: Provide technical engineering information to a Project Manager to ensure project compliance... 
    For contractors
    For subcontractor

    Johnson Service Group (IL)

    Houston, TX
    9 hours ago
  •  ...Project Engineer – Houston, Texas (Telecommunications Division) 2 weeks ago Be among the first 25 applicants Get AI-powered advice on this job and more exclusive features. About Fisk Electric Fisk Electric, a Tutor Perini Company, has been one of the nation’... 
    For subcontractor

    Fisk Electric Company

    Houston, TX
    1 day ago
  •  ...Authorized:National - Family Telework Type:Full-Time Office/Project Work Location: Houston, TX Extraordinary teams...  ...lead a team and interpret, organize, execute, and coordinate the engineering technical aspects for complex projects. You will participate in... 
    Full time
    Contract work
    For contractors
    Work experience placement
    Work at office
    Local area
    Remote work
    Relocation

    Bechtel Global Corporation

    Houston, TX
    4 days ago
  • $24 - $26 per hour

     ...Company Logo Overview The Project Engineer at Suncoast Post-Tension (a Keller company) serves as the primary technical liaison between local operations, engineering teams, and high-rise commercial contractors. This role bridges post-tension design preparation,... 
    Contract work
    For contractors
    For subcontractor
    Work at office
    Local area

    KELLER - North America

    Houston, TX
    4 days ago
  • $70k - $95k

     ...six core domains. EBI is your environmental, sustainability, engineering and health and safety partner, nationwide. Assess. Advise....  ...Position Summary EBI Consulting is seeking a full-time Project Engineer to conduct due diligence services as part of our nationally... 
    Full time
    For contractors
    Work experience placement
    Work at office
    Local area
    Remote work
    Work from home

    EBI logo 2024

    Houston, TX
    1 day ago
  •  ...Join to apply for the Project Engineer role at Netvita Referrals increase your chances of interviewing at Netvita by 2x Get notified about new Project Engineer jobs in Houston, TX Location: Houston, TX Job Responsibilities Responsible for reviewing... 
    Full time
    Work experience placement
    Work at office

    Netvita

    Houston, TX
    1 day ago
  •  ...with Global Renewable Energy businesses We are partnered with an established utility-scale BESS IPP in their search for a Project Engineer to support the execution of BESS and Data Center power infrastructure projects . You would play a key role in coordinating... 
    Full time
    For contractors
    Work at office

    GreenBridge Energy

    Houston, TX
    1 day ago
  •  ...Project EngineerAs a Project Engineer at Exmar Offshore, you'll play a central role in bringing large-scale offshore projects to life, connecting technical teams, managing critical workflows, and ensuring every moving piece aligns from concept to completion.You'll partner... 
    Full time
    For contractors
    Work at office
    Monday to Friday

    GC2 Resources

    Houston, TX
    3 days ago
  •  ...for generations. Location: Baton Rouge, Louisiana; Houston, Texas; Dallas, Texas Travel: 75% Position Summary The Project Engineer I is an entry-level role supporting both office and field operations by assisting with project planning, coordination,... 
    Contract work
    For subcontractor
    Internship
    Work at office
    Local area
    Flexible hours

    Forgen

    Houston, TX
    4 days ago
  •  ...with one weekend home (typical). Conti Federal Services is a leading global construction and engineering company that has delivered some of the most demanding projects for the U.S. federal government. With roots dating back more than 115 years, Conti Federal... 
    For subcontractor
    Worldwide
    Relocation
    Weekend work

    Conti Federal

    Houston, TX
    21 hours ago
  • $70k - $95k

     ...six core domains. EBI is your environmental, sustainability, engineering and health and safety partner, nationwide. Assess. Advise....  ...Position Summary EBI Consulting is seeking a full-time Project Engineer to conduct due diligence services as part of our nationally... 
    Full time
    For contractors
    Work experience placement
    Work at office
    Local area
    Remote work
    Work from home

    EBI Consulting

    Houston, TX
    2 days ago
  •  ...General Responsibilities: Provide engineering and consulting services for a broad array of projects and clients. This may include performing and/or leading field investigations, engineering analysis, calculations, and recommendations, design and development of plans... 

    Terracon

    Houston, TX
    2 days ago
  •  ...Project EngineerOrion is recruiting a Project Engineer for our Houston, TX office. This position is accountable for providing project engineering support to Orion Marine Construction Gulf Coast. This includes developing bid packages for subcontractors, calculating project... 
    Permanent employment
    Work experience placement
    For subcontractor
    Summer internship
    Work at office
    Immediate start

    Orion Corporation

    Houston, TX
    3 days ago
  •  ...SENIOR PROJECT ENGINEER Deployable Energy Position Summary Senior, hands‑on engineering professional leading technical execution across complex nuclear engineering work streams. The Senior Project Engineer provides project‑level technical leadership by integrating schedules... 
    For contractors

    Airswift

    Houston, TX
    1 day ago
  • $85 - $100 per hour

     ...Job Title: Project Engineer I Job Description The Project Engineer I (Junior Project Engineer) supports the successful execution of capital projects by coordinating multidiscipline engineering activities, managing technical documentation, assisting with procurement... 
    Contract work
    Temporary work
    Work at office

    Actalent

    Houston, TX
    1 day ago
  •  ...BAS Project Engineer Schneider Electric is searching for a Project Engineer specializing in Building Automation System (BAS) to make an impact within our organization. This position will sit within our Digital Buildings organization based in Houston. In this role... 
    For contractors
    For subcontractor
    Remote work

    Schneider Electric

    Houston, TX
    3 days ago
  •  ...to meet internal or external customer requirements.· Creates engineering layouts for fit, form and function.· Prepares calculations and...  ...of time in the absence of extensive guidance.· Performs task/project of a larger scope than a Design Engineer II; Will lead specific... 
    Work at office
    Immediate start

    Weatherford International

    Houston, TX
    4 days ago
  •  ...Posted : September 17, 2026 Full-Time Locations Showing 1 location Houston Houston, TX, USA Description The Project Engineer - Infrastructure Development is responsible for overseeing the end-to-end planning and execution of multiple capital projects... 
    Full time
    Temporary work
    For contractors
    Remote work
    Flexible hours

    Cando Rail & Terminals

    Houston, TX
    3 days ago
  •  ...centers to modernizing transmission systems, our industry-recognized engineers and scientists have been at the forefront of grid...  ...innovation and leave your mark on our energy future.Substation Project Structural EngineerHDR Engineering is looking for a Substation... 
    Work at office

    HDR

    Houston, TX
    2 days ago
  •  ...aquí hay un camino para ti. Y no existe ninguna barrera para el posible éxito profesional. Únase a nosotros para ampliar sus horizontes, explorar diversas oportunidades y ser parte del logro de un cambio sostenible.Job Field: Project EngineeringSchedule: Tiempo completo

    Worley

    Houston, TX
    3 days ago
  •  ...Job Description Provide engineering and consulting services for a broad array of projects and clients. This may include performing and/or leading field investigations, engineering analysis, calculations, and recommendations, design and development of plans and specifications... 

    Terracon

    Houston, TX
    2 days ago
  •  ...fabrication. Read and interpret architectural and shop drawings, blueprints, and specifications. Collaborate with project managers, architects, engineers, and other stakeholders to ensure accuracy and completeness of drawings. Visit construction jobsites to verify measurements... 

    ROOMI GROUP CORPORATION

    Houston, TX
    1 day ago
  • $60k - $70k

     ...Looking for more than just a job? At TRIO Electric, we're building the next generation of construction leaders. As an Electrical Project Engineer, you'll work alongside experienced Project Managers and field leaders while gaining hands-on experience managing commercial... 
    Full time
    For contractors
    For subcontractor
    Work at office

    TRIO Electric

    Houston, TX
    9 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Project Engineer IV - 8132. Be the first to apply!