Tool Repair Technician
The Home Depot
Repair and Tool TechnicianPosition Purpose: Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained. Technicians work in both our stores with Tool Rental Centers and in our repair centers. In a store, technicians will be expected to provide service to store customers in Tool Rental which includes writing customer contracts and invoices for equipment rental and tool repairs, checking to make sure tool is operating properly and demonstrating its proper use (as needed). In addition to supporting customer repair needs, they are also responsible for the day-to-day operation and maintenance of equipment in the tool rental department. In non-store locations, technicians will ensure units are repaired, tested for the quality of the repair and cleaned prior to returning to the store where the repair originated. Technicians must have a thorough knowledge of all tools and must effectively manage the tool inventory by maintaining the tools and repairing them as necessary.Location: Milpitas, CAAuto req ID: 81689BRPay Range: $24.50
$28 - $40 per hour
...Management is seeking Diesel Mechanics to inspect, maintain, and repair diesel-powered garbage trucks and heavy equipment used for waste... ...safety and DOT inspection standards. Mechanics use diagnostic tools, hand tools, and shop equipment to complete repairs and maintenance...SuggestedHourly payFull timeRelocation packageShift workNight shiftAfternoon shift- Job Description Job Description We service semi trucks and trailers also do most all repairs on them as well, also work on forklifts and telescoping forklifts. We do a lot of work on boom trucks that are mounted to the truck, so hydraulic knowledge is good.Suggested
$24 - $27 per hour
...electronics and appliances. The Appliance and Consumer Electronics Technician will perform restoration on many varying electronics and... ...Disassemble and evaluate electronics to be cleaned, serviced, and/or repaired. Test, clean, restore, and re-assemble electronics to pre-...SuggestedHourly payFor contractorsImmediate startNight shift- Job Title Duties Tasks are performed following prescribed or established procedures to assist inspectors, investigators, and Flight Standards program officials in their fact-finding or program administration responsibilities and requires basic evaluative judgment...SuggestedRemote work
$25 - $32 per hour
Job Title Spherion $25.00 - $32.00 per hour Temp to Perm 5:00 AM - 1:30 PM SpherionSuggestedHourly payPermanent employmentTemporary work$28 - $34 per hour
...hour (plus 10% for swing shift) Military and Aviation Mechanics/Technicians encouraged to apply We are looking for an AIT Mechanical... ...requirements for this position: Proficient using precision mechanical tools, assembly fixtures, and measuring equipment. High school...Hourly payWork experience placementWork at officeShift workWeekend workAfternoon shift- ...CAD files and maintaining production quality in a prototyping environment. You will also communicate with customers and update internal tracking tools as production progresses. Training is provided to cover job-specific SOPs and equipment care. #J-18808-Ljbffr PRI Global
$22 per hour
...currently seeking self-motivated, results-driven RETAIL COMPUTER TECHNICIANS . If you have a passion for computers and want to have a high... ...rest of your time will be spent in the shop diagnosing and repairing various computer devices and providing constant communication...Full timeFlexible hoursShift workNight shiftDay shift- ...A&P Mechanic InstructorTraining Tomorrow's Technicians to Become Skilled, Employable and Essential.The Aviation Institute of Maintenance (AIM), established in 1969, is a premier institution dedicated to advancing the field of aviation maintenance through exceptional education...Hourly payWork at officeFlexible hoursShift workWeekend workDay shiftAfternoon shift
$20 - $25 per hour
...equipment maintenance tasks (e.g., burn in cables, test cables, basic repairs) as required Diagnose, test and repair computer hardware,... ...instructions and production orders Proficient in the use of hand tools and light power tools Strong multitasking skills with the ability...Hourly payTemporary workLocal areaFlexible hours- ...IT Field TechnicianResponsibilities:IT field technician - driving to client sites and providing general... ...other IT devices. Top two skills are hardware repair hands-on (printers, PCs, POS, etc.) break-fix, use of power tools (e.g. drills) and familiar with the ticketing...Remote workMonday to FridayNight shift
- ...our faculty and lead aspiring aviation technicians with engaging instruction, real-world insights... ..., and stocked with properly maintained tools and equipment.Manage key administrative... ...of contemporary aircraft systems and repair practicesEffective communication skills...Full timePart time
- Cyngn, Inc. is seeking an Office Manager at their Mountain View headquarters. This hands-on role involves managing day-to-day office operations, coordinating with building management, and assisting with administrative tasks across departments. The ideal candidate has at...Remote jobWork at officeFlexible hours
- Micro Center is seeking self-motivated Retail Computer Technicians for our Santa Clara store. You’ll split time between the service counter assisting customers and diagnosing or repairing computers, with uncapped commissions based on productivity. Role requires strong...Shift workNight shiftDay shift
$28.45 - $49.9 per hour
...your skills to perform maintenance and repairs of complex equipment with limited or no... ...variety of rental and customer equipment and tools while using a high degree of independent... ...in the training of lower level technicians as neededMaintain paperwork/electronic documentation...Hourly pay$46 - $51 per hour
...Diesel Mechanic / Fleet Technician AReyes Fleet Management is seeking a Diesel Mechanic / Fleet Technician A to repair and maintain the tractor and trailer equipment at our Reyes... ...coverage including multiple medical plans Tool & Boot annual payout & Paid Uniforms Great...Full timeLocal areaMonday to FridayShift work- ...first 11 months.Holiday pay after your 90 days.Will provide company tools.Responsibilities:Review and address written reports and verbal... ...diagnostic tools and software to determine necessary repairs.Execute repairs on brakes, electrical systems, and other critical...
$42 per hour
...Training Tomorrow's Technicians to Become Skilled, Employable and Essential. About Us - Big Changes, Better Benefits - Join us today! The Aviation Institute of Maintenance (AIM) , established in 1969, is a premier institution dedicated to advancing the field of...Hourly payFull timeWork at officeRelocation packageFlexible hoursWeekend workDay shiftAfternoon shift- ...MechanicThe Diesel Mechanic is responsible for safely and properly repairing commercial trucks and various equipment in the repair shop... ...pounds, stretching, driving/sitting, using pneumatic and power tools Ability to work in extremes of hot and cold weather and wet environments...
$45 - $47 per hour
...performing preventative maintenance and proper repairs on all fleet equipment. Currently... ...bonus paid out over two years. Tool allowance included to support your trade... ...RELATIONSHIPS Internal: All Fleet Technicians, Drivers, Coordinators and Manager....Minimum wageTemporary workWork at officeLocal areaShift work- Pay range: $25.00 - $30.00/hr on w2 (all inclusive) Overview Seeking an experienced Senior Prototype Assembler to support electrical and mechanical assembly of circuit boards, components, and prototype builds. This role involves PCB soldering, rework, and lab support to...
- Yoh is seeking a Prototype Vehicle Technician to join our automotive prototype, pre-production and show vehicle teams. You will build and test prototype vehicles and benches, diagnose and repair systems, and collaborate with engineering to modify components. You will work...
$50 - $52 per hour
...: $50/per hour - $52/per hour Role Overview The ADAS Technician is a skilled technical role within the workshop, supporting prototype... ...environments Experience with diagnostic and analysis tools (DTS Monaco, etc.) Understanding of system interactions across...Hourly payLocal areaWeekend work- Lucid Motors in California is seeking a Prototype Build Technician to help develop and commercialize state‑of‑the art electric vehicles. You will build automotive prototype vehicles, systems, and subsystems and work closely with design engineers to anticipate assembly...
- As a Prototype Build Technician, you will help develop and commercialize state-of-the-art electric vehicle. Our ideal candidate exhibits a can‑do attitude and approaches his or her work with vigor and determination. Candidates should demonstrate the ability to learn quickly...Weekend work
$42 - $58 per hour
...excellence. By refusing to settle, you can help redefine what’s possible and shape the future of mobility. As a Prototype Build Technician, you will help develop and commercialize state-of-the-art electric vehicle. Our ideal candidate exhibits a can-do attitude and approaches...Hourly payWeekend work- ACL Digital is seeking an experienced Senior Prototype Assembler in Santa Clara, California to support the electrical and mechanical assembly of circuit boards and prototype builds. This position requires expertise in PCB soldering, rework, and lab support to meet project...
$43 - $48 per hour
...Vision InsuranceLife & Disability InsuranceBi-Weekly pay and national growth opportunitiesWhat You'll Work On:Diagnose, maintain, and repair diesel and gas-powered trucks, vans, Sprinters and medium duty vehiclesPreventive maintenance and DOT inspectionsPerform test...Hourly payWeekly payFull timeLocal areaMonday to FridayDay shift- ...California, focusing on equipment maintenance and safety within the trucking industry. Candidates will be responsible for diagnosing and repairing various mechanical issues, alongside performing preventative maintenance tasks. Successful applicants will demonstrate proficiency...
- Sysco is seeking candidates for fleet technician roles in a dynamic maintenance environment. You will learn to inspect and maintain a variety... ...to regulatory standards as you build hands-on skills in maintenance and repairs across all fleet equipment. #J-18808-Ljbffr SyscoFlexible hours
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Tool Repair Technician. Be the first to apply!



