Electrical Engineer II
EPC Power
Electrical Engineer II
An Electrical Engineer II independently troubleshoots complex printed circuit board assemblies and electrical subsystems used in EPC Power conversion systems. In this role an Electrical Engineer II will diagnose failures to the circuit or component level, lead structured root cause investigations, and develop corrective actions for production, development, and field-return issues. This role requires strong hands-on debug capability, sound circuit analysis, and the ability to solve difficult PCB problems with limited supervision.
Responsibilities:
- Independently troubleshoot complex PCB assemblies that are not functioning as intended, including intermittent or difficult-to-reproduce failures.
- Diagnose board-level failures to the circuit, component, layout, process, application, or system-interface level using a structured troubleshooting approach.
- Analyze analog, digital, mixed-signal, communication, sensing, protection, power supply, gate-drive, isolation, and control circuits.
- Use oscilloscopes, differential probes, current probes, logic analyzers, power analyzers, thermal cameras, curve tracers, soldering/rework tools, and other diagnostic equipment as appropriate.
- Interpret schematics, PCB layouts, BOMs, datasheets, signal paths, test procedures, firmware interfaces, and production data to identify failure mechanisms.
- Lead root cause investigations for recurring production failures, engineering test failures, returned PCB assemblies, and test escapes.
- Develop troubleshooting plans, test setups, fault-isolation methods, and validation activities to confirm root cause and verify corrective action effectiveness.
- Identify design, component, supplier, manufacturing, workmanship, handling, firmware-interface, or test-process contributors to PCB failures.
- Prepare clear technical reports summarizing symptoms, evidence, analysis, root cause, corrective action, and verification results.
- Work directly with Manufacturing, Quality, Supplier Quality, Service, Test, Firmware, and Design Engineering to close technical issues.
- Mentor technicians and junior engineers in board-level diagnostic techniques, documentation discipline, and safe troubleshooting practices.
- Participate in design reviews with emphasis on test coverage, reliability, manufacturability, and serviceability.
- Other duties and responsibilities within the scope of position as needed or assigned.
Qualifications:
- Bachelor's degree in Electrical Engineering or closely related field.
- 3-7 years of relevant experience troubleshooting complex PCB assemblies, electronic systems, power electronics hardware, or industrial controls.
- Demonstrated ability to troubleshoot PCB assemblies to the component or circuit-function level.
- Strong understanding of analog, digital, mixed-signal, communication, power supply, sensing, control, and protection circuitry.
- Proficiency with advanced oscilloscope measurements and laboratory instrumentation.
- Ability to interpret PCB layout details, signal paths, grounding, isolation, creepage/clearance considerations, and component placement impacts.
- Experience leading root cause investigations and documenting technical findings.
- Ability to understand and comply with EPC Power safety policies, ESD controls, laboratory procedures, and quality requirements.
- Ability to manage multiple investigations while maintaining accurate documentation and follow-through.
- Ability to stand, sit, reach with hand and arms, stoop, kneel, crouch and lift/move up to 50 pounds. Visual and hearing acuity required.
Desired Skills:
- Experience with inverters, converters, gate drivers, high-voltage circuits, embedded controls, or industrial power electronics.
- Experience with CANBus, Modbus, Ethernet-based communication, waveform capture, data logging, and automated test methods.
- Experience with Python, MATLAB/Simulink, LabVIEW, C, or other engineering analysis and automation tools.
- Hands-on lab skills including soldering, rework, prototyping, cable harness fabrication, and custom test-fixture development.
- Experience supporting manufacturing, supplier quality, and returned material investigations.
Benefits:
- 401(k) Matching
- Health Insurance
- Dental Insurance
- Vision Insurance
- Disability Insurance
- Employee Assistance Program
- Flexible Spending Account
- Life Insurance
- Paid Time Off
- Tuition Reimbursement
EPC Power is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.
- ...Primary Function The Electrical Engineer role would encompass electrical design and testing for the Ceramics subsegment. They would oversee developing equipment testing standards ranging from electrical screening to voltage breakdown, designing custom tests for customer...Suggested
- ...Electrical Engineer We are seeking an Electrical Engineer to lead and support the design, development, and sustainment of production and engineering test systems. This role is heavily hands-on, with significant responsibility for PCBA test fixture design, including...SuggestedFlexible hours
- ...Electrical Controls Engineer Responsibilities PLC programming: Allen-Bradley, Siemens, Pro-Logic, CompactLogix, Productivity HMI display logic Electrical design in AutoCAD and electrical BOMs Sustaining engineering, cost reduction, continuous improvement...Suggested
$81.9k - $122.9k
...who serve customers in 119 countries/territories. To learn more, visit Job Description What will you do as an Electrical Engineer at Sealed Air? As an Electrical Engineer at Sealed Air, you will design, develop, and improve electrical and control systems...SuggestedFor contractorsWork at officeLocal areaWorldwideRelocationFlexible hours$46.4k - $63.8k
...Field Service Technician II This is where your work makes a difference. At Baxter, we believe every personregardless of who they are or where they are fromdeserves a chance to live a healthy life. It was our founding belief in 1931 and continues to be our guiding principle...SuggestedContract work- ...Automation Engineer This position will drive reliability and innovation in a highly automated manufacturing environment by designing... ..., start up new equipment and process controls including: electrical component selection and approval, electrical design approval,...For contractorsWork at officeShift work
- ...Electrical Service Technicians ID: 1691 Location: Greenville, SC Department: Electrical Position Summary: The Electrical Service Technician is responsible for the safe and efficient installation, maintenance, troubleshooting, and repair of electrical...ApprenticeshipLocal area
- Job Title: Nuclear Engineer (Naval Reactors Engineer) Category / Component: Officer • Active Overview Design, regulate, and oversee the Navy’s nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear...Contract workApprenticeshipWork at office
- Job Title: Electronics Tech/Electrician (ET/FC) Category / Component: Enlisted • Active Overview The Advanced Electronics and Computer Field trains Sailors to maintain, operate, and repair some of the Navy’s most sophisticated electronics and computing systems, including...ApprenticeshipLocal areaRotating shift
- ...Gomining Psu Repair Engineer GoMining is one of the largest Bitcoin mining ecosystems in the world, serving millions of users globally. We run our own industrial-scale mining infrastructure across the United States a fleet of more than 80,000 machines and we keep expanding...Relocation package
- ...Overview At UES, we're a team of more than 4,000 engineers, scientists, geologists, inspectors, technicians, and drillers united by a shared purpose-to make a meaningful impact in the communities we serve. As a national leader in geotechnical engineering, environmental...Work at office
- ...Utility Engineer Responsible for the daily maintenance of Utility equipment, formulate work instructions, organize the spare parts... ...Responsible for calculating the company's energy consumption (electricity and water), and formulating effective energy conservation and...Work at office
- Job Responsibilities Assist plumbers with the installation, maintenance, and repair of plumbing systems. Support commercial and residential plumbing projects, including new construction and renovations. Assist with measuring, cutting, fitting, and assembling...Local areaWeekend work
$81.9k - $122.9k
...Job Description Packaging Engineer Simpsonville Requisition ID: 57171 If you are a current employee click here to apply. Sealed Air designs and delivers packaging solutions that protect essential goods transported worldwide, preserve food, enable...Local areaImmediate startWorldwideRelocationFlexible hours$24 per hour
...growing team. This position is responsible for the installation, troubleshooting, repair, testing, maintenance, and refurbishment of electrical systems, power distribution equipment, generators, industrial machinery, and contractor equipment. The ideal candidate has...Hourly payFull timeTemporary workFor contractorsLocal areaMonday to Friday- ...Position Summary General Equipment & Supply (GE&S) is seeking an experienced and highly skilled Master Electrician to lead electrical diagnostics, repairs, refurbishment, testing, and quality control efforts for a wide range of contractor, utility, industrial, and...Full timeFor contractorsLocal areaMonday to Friday
- ...Geotechnical Project Engineer At UES, we're a team of more than 4,000 engineers, scientists, geologists, inspectors, technicians, and drillers united by a shared purpose—to make a meaningful impact in the communities we serve. As a national leader in geotechnical engineering...Contract workFor subcontractorWork at office
$26 - $30 per hour
...n Paid Vacation\n Holidays\n Training and Safety Programs\n\nPurpose and Function:\n\nThe purpose of this position is to install electrical systems in new construction, upfit and remodel projects. This position will work directly under the supervision of a crew leader...Hourly payFull timeFor contractors- ...rules and regulations Maintain a clean and safe work environment Use blueprints, sketches, or building plans to determine electrical requirements and materials needed Qualifications: Valid Driver’s License Strong understanding of mathematical concepts and...Flexible hours
- Responsibilities Brasfield & Gorrie is currently accepting applications for a Carpenter Helper. Below are the main responsibilities for this position. (This description may not include all duties required of this position) Help carpenters by performing...Temporary work
- ...Design Enginee r I Summary: As an HVAC Field Support Design Engineer you will provide essential support to customers and field... ...opportunities to expand your knowledge on multi-disciplinary topics (electrical refrigeration energy recovery PLCs etc.). Continuous...Full timePart timeWork at office
- ...diagnostic tools and special service equipment Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc. Communicate directly with the Service Advisor so that customers...Local area
- ...skilled and semi-skilled tasks to maintain a 24/7 facilities operation. Responsibilities include maintaining the mechanical, electrical and life safety equipment as well as, the appearances of the facilities and grounds at various property locations. The position...For contractorsWork at office
- Lowes Foods Store Maintenance To ensure that Lowes Foods guest service, safety, and store cleanliness standards are maintained throughout the store. Ensure Show standards are implemented and maintained both inside and outside the store. Responsibilities 1. Provide...
- SC Handyman & Laborer NeededSimpsonville, SC, United States Job Openings SC Handyman & Laborer NeededAbout the Job SC Handyman & Laborer NeedednatPROpres is a nationwide industry leader in property preservation. We are growing leaps and bounds and want to partner up with...For contractorsFor subcontractorImmediate start
- SC Handyman & Laborer Needed Simpsonville, SC, United States Job Openings SC Handyman & Laborer Needed About the Job NatPROpres is a nationwide industry leader in property preservation. We are growing leaps and bounds and want to partner up with reliable vendors...For contractorsFor subcontractorImmediate start
- ...OperationsLocation: Fountain Inn, SC, United StatesSchedule: Full timePosted: 2026-11-17Position SummaryThe Continuous Improvement Engineer is responsible for identifying, developing, and implementing process improvements across manufacturing operations to enhance...Worldwide
- ...Category: General Quality & Business SystemsLocation: Fountain Inn, SC, United StatesSchedule: Full timePosted: 2026-10-22The Quality Engineer is responsible for ensuring products and manufacturing processes meet customer requirements, company quality standards, and...Work experience placement
- Carolina Heating is hiring a Residential HVAC Maintenance Technician in the Greenville, SC area. This role is ideal for someone who is dependable, eager to learn the trade, and takes pride in quality work This role is perfect for someone who enjoys preventative maintenance...Hourly paySeasonal work
- Job Description Histotechnician / Histotechnologist (HT or HTL) - ASCP Certified We are seeking a skilled and detail-oriented ASCP Certified Histotechnician (HT) or Histotechnologist (HTL) to join our pathology laboratory team. The ideal candidate will have...Full timePart timeImmediate startNight shiftWeekend workDay shiftAfternoon shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Electrical Engineer II. Be the first to apply!
- electrical Fountain Inn, SC
- electrical controls Fountain Inn, SC
- technician electrical Fountain Inn, SC
- bilingual electrical engineer
- electrical engineering technology
- sales engineer electrical
- electrical development engineer
- electrical engineer no experience
- electrical engineering consultant
- electrical designer




