Press Brake Operator
The Will-Burt Company
Description SUMMARY Sets up and operates power brake to bend, notch, punch, form rolls, arc, or straighten metal plates, sheet metal, and structural shapes to blueprint or sketch specifications by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES
Other duties may be assigned. Requirements REQUIRED COMPETENCY To perform the job successfully, an individual should demonstrate the following competencies: Quality - Demonstrates accuracy and thoroughness; looks for ways to improve and promote quality; applies feedback to improve performance; monitors own work to ensure quality. Quantity - Meets productivity standards; completes work in a timely manner; strives to increase productivity; works quickly. Safety and Security - Observes safety and security procedures; determines appropriate action beyond guidelines; reports potentially unsafe conditions; uses equipment and materials properly. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION AND EXPERIENCE High school diploma or general education degree (GED); or one to five years of related experience and/or training, or equivalent combination of education and experience. Must be able to read and interpret blueprints and inspect completed parts to ensure quality standards are met. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common-sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS None are required. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and reach with hands and arms. The employee frequently is required to walk and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit, climb or balance, and talk or hear. The employee must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move more than 100 pounds. Specific vision abilities required by this job include close vision. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to high, precarious places and vibration. The noise level in the work environment is usually loud.
- Selects, positions, and aligns dies in machine ram and bed.
- Turns setscrews or bolts to fasten clamp bar that holds dies in position.
- Turns adjustment screws to set specified pressure of ram and clearance between dies to the thickness of metal, as indicated by calibrated scale or feeler gauges.
- Lays out or details layouts on work stock from blueprints or templates.
- Sets up CNC back gauge.
- Starts machine to lower ram or depresses pedal to activate ram that bends metal.
- Sets stops on machine bed and repositions stock to run successive pieces or perform multiple operations.
- Verifies workpiece dimensions through first-piece and random production inspections.
- Devises and builds temporary dies.
Other duties may be assigned. Requirements REQUIRED COMPETENCY To perform the job successfully, an individual should demonstrate the following competencies: Quality - Demonstrates accuracy and thoroughness; looks for ways to improve and promote quality; applies feedback to improve performance; monitors own work to ensure quality. Quantity - Meets productivity standards; completes work in a timely manner; strives to increase productivity; works quickly. Safety and Security - Observes safety and security procedures; determines appropriate action beyond guidelines; reports potentially unsafe conditions; uses equipment and materials properly. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION AND EXPERIENCE High school diploma or general education degree (GED); or one to five years of related experience and/or training, or equivalent combination of education and experience. Must be able to read and interpret blueprints and inspect completed parts to ensure quality standards are met. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common-sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS None are required. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and reach with hands and arms. The employee frequently is required to walk and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit, climb or balance, and talk or hear. The employee must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move more than 100 pounds. Specific vision abilities required by this job include close vision. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to high, precarious places and vibration. The noise level in the work environment is usually loud.
Vacancy posted 2 days ago
Similar jobs that could be interesting for youBased on the Press Brake Operator in Orrville, OH vacancy
$15 - $25 per hour
...Job Description Job Description **Job Title:** Brake Press Operator **Job Description:** Mancan is currently seeking experienced CNC Press Brake Operators for our esteemed client in Smithville, Ohio. We are in search of individuals with a demonstrated proficiency...SuggestedHourly payTemporary workMonday to FridayDay shift$39.5k - $65.5k
...mid-1940s, Tylok is at a pivotal point as it transitions to the next generation of leadership, with ambitious plans for growth and operational excellence. Founded by Cullen Crawford, often referred to as the father of the instrumentation fitting industry, Tylok remains...SuggestedHourly payDay shiftAfternoon shift- ...Description SUMMARY Sets up and operates conventional, special purpose, and numerical control (NC) machines and CNC machining centers to fabricate metallic and nonmetallic parts by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES include...Suggested
$15 - $25 per hour
...Description Job Description **Job Title:** Laser Burn Table Operator/Set-Up **Company:** A metal manufacturing company located... ...- Understand bend allowances and CNC controls - Set up press brakes and operate machines - Report to the Shop Supervisor **Desired...SuggestedHourly payTemporary workMonday to FridayShift workWeekend workDay shift$16 per hour
...Job Description Job Description This job description is for a Factory Press Operator position in Smithville with a company that offers a 1st shift temp-to-hire opportunity. Below are the key details and requirements: **Position:** Factory Press Operator **Location...SuggestedHourly payTemporary workMonday to FridayShift workDay shift- ...snow and ice removal equipment.Join our friendly team of machine operators in Wooster, Ohio!Under general supervision, the Laser Operator... ...the laser burning machine, plasma burning machine, roller, brake press, saw and drill.Essential Functions of the Job:Set up and operate...
- ...maintain records as necessary.Read and follow instruction booklet as to: Standard Operating Procedures, Quality Standards and Specifications, Status ticket, etc.Operate transfer-molding presses inside or outside of clean environment room to established standards as per...
$24 per hour
...Press Operator - 2nd ShiftStarting Rate $24.00 per hour Work Schedule - 3:00pm - 1:00am 120 hours Paid Vacation 11 Paid Holidays Paid sick days Medical, Life, Dental and Vision Plans 401 (K) Program with company matching $150 Annual Safety Shoe ReimbursementA Day In The...Hourly payAfternoon shift$18.28 - $18.52 per hour
...Job Description Job Description Laser Machine Operator Location: Wooster, OH Pay: $18.28-$18.52 per hour | Weekly Pay Minutemen Staffing is hiring Laser Machine Operators for a manufacturing company in Wooster, Ohio. We are looking for dependable...Hourly payWeekly payLocal areaMonday to ThursdayShift workNight shiftDay shift$18 per hour
...Job Description Job Description Job Title: Press Operator - 21-13809 Company or Role Overview: Employee-owned company looking for plastic and rubber press operators. A leader in the supply of custom molded products to the automotive market since the 1950's,...Weekly payPermanent employmentTemporary workMonday to FridayShift work$17 per hour
...Are you looking to gain experience with a great company? Mancan is working with a company in Fredericksburg who is looking for Press Operators on 2nd shift. No experience needed, they are willing to train! All positions are temp-to-hire. Duties will include: -working...Hourly payTemporary workMonday to FridayShift workAfternoon shift- Job DescriptionPosition Purpose:Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units
- ...Competitive salary Dental insurance Paid time off Vision insurance Job Overview We are seeking a skilled Directional Drill Operator to join our team. As a Driller, you will be responsible for operating heavy equipment and machinery to horizontally bore utilities...
- ...currently hiring a dependable, detail-oriented Large Format Print Operator for a company in the Canal Fulton area. This position involves... ...like a large commercial copier than a traditional printing press. Job Responsibilities: • Operate large-format digital printing...Temporary workCurrently hiringWork at officeLocal areaMonday to Friday
$18 per hour
...Rental which includes writing customer contracts and invoices for equipment rental and tool repairs, checking to make sure tool is operating properly and demonstrating its proper use (as needed). In addition to supporting customer repair needs, they are also responsible...Local area- ...Description SUMMARY Set up, operate, and maintain conventional, special purpose, manual, NC, and CNC machines to fabricate metallic and nonmetallic parts in all aspects of production & in-process inspection. Collaborate with other departments across the organization...Work at office
- ...ACO, Inc. Polymer Production Operator Position Description POLYMER PRODUCTION OPERATOR SUMMARY: The Production Operator will safely control various equipment to produce products on the Production Line. POLYMER PRODUCTION OPERATOR ESSENTIAL DUTIES AND RESPONSIBILITIES...Hourly payTemporary work
$20 per hour
...Job Title: Forklift Operator (1st Shift) ($20.00/hr.) Job Description The Forklift Operator supports daily warehouse and production operations by safely operating forklifts, handling materials, organizing parts, and performing basic inventory tasks. This role...Weekly payContract workTemporary workImmediate startShift workDay shift- ...Job Description Job Description Industrial Machine Operator Location: Dalton, OH Pay: Based on Experience Job Type: Full-Time | Temp-to-Hire Position Overview A manufacturing company in the Dalton area is seeking an experienced Industrial Machine Operator...Full timeTemporary workMonday to Friday
$21 per hour
...Job Description Job Description CNC Machine Operator - $21.00/Hour Location: Apple Creek, OH Pay: $21.00 per hour | Weekly Pay Full-Time | Manufacturing & Machining Minutemen Staffing is hiring CNC Machine Operators for a manufacturing company...Hourly payWeekly payFull timeLocal areaShift workDay shift$17 - $22 per hour
...Job Description Job Description Job Title: CNC Machine Operator - 21-13811 $17 - $22 /Hour | Wooster, OH | 2nd Shift Pay: $17 - $22 /hour based on experience Schedule: Monday - Friday | 2:00 PM - 10:20 PM Location: Wooster, Ohio Employment Type: Temp...Weekly payTemporary workMonday to FridayAfternoon shift- ...Job Description Job Description DUTIES AND RESPONSIBILITIES: Position to leverage growth for YOU! Press Brake Operation Parts Cleaning Shear Operation Plasma cutting Metal Fabrication Basic computer navigation, to access part library Willing...Full timeTemporary workShift work
- ...climbing equipment. A Tree Trimmer must have knowledge of chainsaw safety, and roping and rigging techniques. A Tree Trimmer also operates chain saws, pruners, brush chipper and may be called upon to operate an aerial lift device (bucket truck.) A skilled Tree Climber/...Weekly payContract workTemporary workFlexible hours
- ...Position: Meat Manager Overview: A meat manager plans, directs and controls all aspects of the meat department operation, schedules the work and employees, oversees all ordering to support the ad and maximize gross and net profit. They direct the meat employees to...Shift work
$21 per hour
Job Description Job Description Build precision parts on modern machines Location: Apple Creek, Ohio Compensation: Starting at $21.00 per hour, with a pay increase upon hire-in Your day-to-day on 2nd or 3rd shift You arrive, review work instructions, and ...Hourly payFull timeShift workNight shiftAfternoon shift$20 - $21.5 per hour
...stay active? Spherion Mid Ohio is hiring Warehouse Production Associates in Orrville for a large manufacturing and distribution operation. This is a good fit for dependable people who don't mind physical work, changing temperatures, or getting a little dusty while...Weekly payLocal areaShift workDay shiftAfternoon shift- Senior Meat Cutter MEAT CUTTER - Senior Meat Cutter, having a demonstrated proficiency in all aspects of Meat production as required by Department standards, working in the Cutting Room, and responsible for the preparation of Meat items for sale. This person's primary...Full timeWork experience placementNight shiftAfternoon shift
$17 - $17.5 per hour
...Available Job Summary The Bakery Production Associate is an entry-level role responsible for supporting daily manufacturing operations. Team members rotate through multiple production positions to ensure efficient workflow, high-quality products, and safe plant...Hourly payAll shiftsFlexible hoursShift workWeekend work- ...based on what the programmer decides Setting up the CNC equipment with the correct attachments and parts to perform the job Operating and monitoring the machines Troubleshooting issues with the machine programming Following safety procedures and regulations...
$21 - $23 per hour
...full-time, 1st-shift opportunity with competitive pay based on relevant machining experience. Responsibilities: • Set up and operate turret lathes • Install tooling and set machine stops • Produce quality parts while meeting production requirements • Perform...Full timeTemporary workLocal areaMonday to FridayDay shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Press Brake Operator. Be the first to apply!


