Operating Engineer
$25.13 - $29.57 per hourCushman & Wakefield
Operating Engineer Job Description Summary Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties Job Description Perform all plumbing, electrical, or HVAC requirements of the building(s) Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc. Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings Verify field conditions and perform any necessary repairs or adjustments Monitor Energy Management Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.) Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed. Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management Document and report activities to supervisor Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits Complete all required C&W Safety Training as scheduled annually Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties Key Competencies Technical Proficiency Initiative Flexibility Multi-Tasking Sense of Urgency Important Education High School Diploma of GED Equivalent Graduate of apprentice program or trade school preferred Important Experience 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting Additional Eligibility Qualifications Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.) May be required to have certification as a Universal Technician for CFC’s depending on market licensure requirements Possess and maintain a valid driver’s license and good driving record with periodic checks (where applicable) Basic Computing Skills in Outlook, Excel & Word Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc. Knowledgeable in energy management systems, techniques and operations. Thorough knowledge in all building systems operations, maintenance and repair. Work Environment This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine Involves movement between departments, floors, and properties to facilitate work Ability to speak clearly so others can understand you Ability to read and understand information presented orally and in writing Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics Other Duties This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice. Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, as well as paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements. The company will not pay less than minimum wage for this role. The compensation for the position is: $25.13 - $29.57 Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated. In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at View phone number on click.appcast.io or email View email address on click.appcast.io. Please refer to the job title and job location when you contact us. #J-18808-Ljbffr Cushman & Wakefield
- ...materials, and support the overall Marietta Technical Publications operating environment. This hybrid role serves two distinct functional... ...’s degree in Computer Science, Information Technology, Engineering, Educational Technology, or a related field, or equivalent combination...SuggestedFull timeWork at officeRemote workRelocationShift work3 days per week
- ROLE Schnabel is seeking an Operating Engineer to assist with the building of specialty underground structures. Our goal is to find a Geotechnical Driller Operator or equipment operator with experience in the safe operation of tieback and micropile drills (Klemm, Comacchio...SuggestedFor contractorsFor subcontractorLocal areaShift work
- ...under the supervision of a surgeon to facilitate the safe and effective conduct of invasive surgical procedures, ensuring that the operating room environment is safe, that equipment functions properly, and that the surgical procedure is conducted under conditions that...SuggestedWork experience placementFlexible hoursShift workWeekend workWeekday work
- Ace Electric Electrical Construction Operations Manager - ATL Job Details Job Location: KENNESAW, Georgia Full time or Part time: Full... ...Team Experience: 5+ years in construction, electrical, or engineering; 3+ years in a leadership role Education: High school...SuggestedFull timePart timeFor subcontractor
- Ace Electric is seeking an Electrical Construction Operations Manager in Kennesaw, Georgia. This full-time role requires leading field... ...should have over 5 years of experience in construction or engineering and at least 3 years in a leadership role. Familiarity with MS...SuggestedFull time
- Vanderlande’s Controls Engineering Department is responsible for the design, programming, commissioning, and testing of material handling... ...) Write Controls Functional Specification / Description of Operations under direction of lead engineer Write, debug, and test PLC...For subcontractorWork at office
- Controls Support Engineer page is loaded## Controls Support Engineerlocations: Marietta, GA USAtime type: Full timeposted on: Posted... ...material handling systems for airports, warehouses, and parcel operations. Our innovative solutions help move millions of products and pieces...
- ...Services company , is seeking a Principal Network/ Systems Engineer to support KITS and our government customer in Carson, CA. This... ...that delivers Enterprise Solutions, Professional Services and Operational Management to Federal Government Agencies. As a wholly owned subsidiary...Contract workLocal areaFlexible hours
$60k - $80k
...in the Smyrna, GA area is looking for an experienced Service Engineer Hours : Monday-Friday 8-5 or 9-6 Salary :$60-80K (DOE) Benefits... ...skills Ability to read and understand documents, such as operating and maintenance instructions, procedure manuals, and electrical...Monday to Friday- ### Job TitleSenior Automation Support Engineer (Controls)### Job Description**Position Summary:**As an Automation Support Engineer (... ...fast recovery, and clear communication are critical to daily operations.You will work closely with the customer’s on‐site technical teams...Temporary workLocal areaRemote workFlexible hoursNight shift
$123.5k - $217.7k
...advanced air vehicle to designing aircraft that defies gravity, our engineers live on the cutting edge of technology. Never have the... ...installations and configurations necessary to obtain Authorizations to Operation (ATOs) in support of program schedules; and contribute to...Full timeContract workTemporary workWork experience placementWork at officeFlexible hours- Overview Seeking a Senior Electrical/Controls Engineer for our Atlanta, GA branch location. Will function as a hands‑on engineer providing... ...Support production start‑ups to ensure that they meet safe operational and functional requirements for the project. Food/Beverage/...Relocation packageWeekend work
- ...air vehicle to designing aircraft that defies gravity, our engineers live on the cutting edge of technology. Never have the opportunities... ...and configurations necessary to obtain Authorizations to Operation (ATOs) in support of program schedules; and contribute to...Full timeWork at officeRemote workRelocationFlexible hoursShift work3 days per week
$101k - $178.14k
...accomplish their missions. Seeking well-rounded experienced engineer with strong background in real-time and heterogeneous... ...and capability enhancements. Candidate will participate in operations and all project phases including proposal development, design...Full timeTemporary workWork experience placementInterim roleWork at officeFlexible hours- A leading private label food manufacturer seeks a Plant Engineer in Marietta, Georgia. The role involves managing capital projects to enhance operational efficiency, safety, and product quality across facilities. Ideal candidates will have a Bachelor's degree in Engineering...
- Job Description Performance Contracting seeks an experienced Project Engineer for its PCI Atlanta 101 operations, based in Fayetteville, GA. The Project Engineer will be responsible for the following: Perform labor control on assigned projects, including setup and maintenance...Work at officeLocal areaFlexible hours
- Systems Engineer Sage Integration Holdings, LLC protects the people, facilities, and reputation of enterprise clients by advancing the... ...terminate cabling, and complete infrastructure work as required Operate lifts and work safely at various heights Follow all customer...Night shift
- Job Purpose RF/Radar Systems Engineers work with a team to perform advanced system and algorithm development using established systems... ...algorithms and systems for design verification or to facilitate operational software development, the design of sensor modes that maximize...Work experience placement
- Schnabel is seeking an Operating Engineer in Marietta, Georgia to assist with building specialty underground structures. The ideal candidate will have experience operating drill rigs and will ensure compliance with safety regulations while maintaining a clean work environment...
- Senior Process Engineer: Polymer Profile Extrusions We are seeking a highly skilled Polymer Process Engineer with deep subject matter... ...In this role, you will be the technical lead for our extrusion operations, responsible for optimizing complex production lines—from...
- ...A company that cares about leading the way in construction, engineering, manufacturing and renewable energy, redefining how energy is... ...support commissioning, turnover, and work cooperatively with the operations side project manager. The Preconstruction Manager is the key...Full timeFor subcontractorMonday to Friday
$23.82 - $30.37 per hour
Traffic Signal Technician III (Engineering) Type: Full Time Salary/Pay Rate: Starting Pay Range: $23.82 - $30.37 per hour DOQ JOB SUMMARY... ...; assists with training and instructing co‑workers regarding operational procedures and proper use of equipment; assists with...Hourly payFull timeFor contractorsWork at office- Join our innovative team as an Embedded Systems Test Automation Engineer, where you’ll drive the quality and reliability of StreamLabs... ...Framework) Familiarity with TI RTOS or similar real-time operating systems (strongly preferred) Knowledge of CI/CD tools, processes...Local area
- ...(an Ardurra Company) is looking to hire an experienced Civil Engineering leader for our Energy, Power & Renewables practice based in... ...future energy demands on the utility provider's systems and operations, as well as requirements for continued maintenance of gas lines...For contractorsLocal areaWork from home
- The Junior Automated Test Engineer will support StreamLabs Water's Hardware & Operations team by developing, executing, and maintaining automated and manual test suites for IoT water monitoring products. This full-time position is onsite in Smyrna, GA, reporting directly...Full time
$65 - $75 per hour
...Job Description The Principal Software Engineer—AI Warehouse Systems will spearhead the design and development of advanced artificial... ...processes that enhance efficiency, adaptability, and operational excellence across supply chain environments. This role leads...Work at officeRemote work- A technology firm in Smyrna, GA is seeking a Junior Automated Test Engineer to support their Hardware & Operations team. The role involves developing and maintaining automated and manual test suites for IoT water monitoring products. Responsibilities include executing test...Full time
$55k - $75k
Technical Service Center (TSC) Engineer Location: Smyrna, GA Job Type: Full-Time | Onsite Travel: 10-20% (occasional customer site visits... ...Service Center (TSC) Engineer to support in‑house molding operations within a technical service environment. This role focuses on hands...Full time- ...) and hours per unit (HPU). Update the manufacturing plan. Perform manufacturing evaluations of engineering changes. Provide technical support for Production Operations (Mechanics, etc.) to assist with Product Flow. Create cost reduction initiatives. Other Manufacturing...Work at officeImmediate startRemote workFlexible hoursWeekend workAfternoon shift
$55k - $75k
Technical Service Center (TSC) Engineer - Injection Molding & Equipment Support We are seeking a motivated and technically driven Technical... ...Service Center (TSC) Engineer to support injection molding operations at a state‑of‑the‑art facility in Smyrna, GA. This is a hands‑...Hourly payWork at officeRelocation
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Operating Engineer. Be the first to apply!


