Operator I
$38.91 per hourEssential Utilities
Operator I Pickering Creek/Upper Merion/Ingrams Mill Treatment Plants
Essential Duties:
It must be understood that the person awarded the position must accept. Position requires shift work and requires employee moving to permanent shift position as Plant openings occur. Pickering Creek and Ingrams Mill work 12-hour shifts. New employees accepting a position at this plant are required to abide by the new schedule when covering shift.
- The position is located at the Pickering Water Treatment Plant; however, applicant may also be required to report to either Ingrams or Upper Merion sites whenever necessary.
- The position requires the employee to obtain and maintain a Waterworks Operators Class A license with all associated subclasses required to operate the above plants. Employees have 3 years to obtain license. If after 3 years they have not obtained license, employee will be terminated.
- Waterworks license requirements will require passing written test, but actual license will not be required until experience requirements, i.e., years of actual work experience at the plant are met.
- Entry level employees will be required to have Associates Degree, or 2 years trade school or similar education. In lieu of that, two-years experience in waterworks field or similar field requiring use of mechanical, treatment, and/or mathematical skills.
- Position requires labor intensive work, including lifting requirements of 75 pounds.
- Position requires good mechanical skills as required in the repair/replacement of all plant equipment, including but not limited to pumps, instruments, chemical feed equipment, etc.
- Must be able to make mathematical calculations to determine chemical doses required for flow rates and proper treatment.
- Must be available for overtime as needed to maintain continuous plant operations.
- Applicants must have valid US driver's license. This job requires a Commercial Driver's License, Class C, with a Hazardous Material Endorsement and the candidate awarded the job must obtain a CDL within the required time period.
- Will be required to perform as a member of the Hazmat Response Team if a team is maintained.
- Required to meet and follow all Aqua safety requirements dealing with hazardous chemical handling and PPE requirements.
- A written test will be given.
The hourly rate of pay is $38.91.
All interested employees should apply during the posting period. Employees must be employed more than twelve (12) months in a Department to be eligible to apply for a job outside of the Department. If there are no applicants with more than the required twelve (12) months, employees with less than twelve (12) months' service shall be eligible.
- Within (60) days of award of job, the employee must pass the required knowledge testing and receive the required learner's permit.
- Within (120) additional days must have passed and secured a CDL with necessary endorsements.
- Failure to secure a CDL within (120) days will be cause for employee to leave job and secure job which does not require a CDL.
To the extent that PennDot delays the issue of the learner's permit this (60) days will be extended accordingly.
Waterworks license requirements are that employee passes tests, and that license will be contingent upon experience requirements.
The classification of "Operator I" is subject to the Federal Highway Administration Regulation 49 CFR Part 382 that stipulates that any employee who is required to obtain and hold a commercial driver's license is subject to the following:
- Random drug and alcohol testing
- Reasonable suspicion testing
- Post accident testing involving a loss of life and/or citation for a moving violation
- Return to duty testing
- Bi-annual medical certification (physical examination)
The United States Department of Transportation governing Physical Qualifications and Examinations, SUBPART E Article 391.41 states a person holding a Commercial Driver's License shall not drive a commercial motor vehicle unless he/she is physically qualified to do so. He/she will be required to successfully obtain a Medical Examiner's Certificate prior to starting in the position. Federal regulations mandate that the medical certificate must be in one's possession at all times.
Aqua, an Essential Utilities company is an Equal Opportunity / Affirmative Action employer. Equal employment opportunity is provided to all employees and applicants for employment without regard to the following legally protected characteristics: race, color, religion, sex, national origin, age, pregnancy (including childbirth and related medical conditions, including medical conditions related to lactation), physical or mental disability, covered-veteran status, genetic information (including testing and characteristics), sexual orientation, gender identity or expression or any other characteristic protected by applicable local, state or federal law. Aqua is committed to providing reasonable accommodation to individuals with disabilities. If you have a condition that may prevent you from applying for a job online or need to request an accommodation during the interview process, please call View phone number on click.appcast.io). To maintain the integrity of the recruitment process and to avoid real or perceived conflicts of interest due to employment and/or assignment of family members and personal referrals, specific guidelines apply to the hiring and assignment of these individuals including, but not limited to:
- Family members cannot result in a supervisor/subordinate reporting relationship
- Family members cannot work in the same department.
- ...Equipment Operator Allan Myers is looking for a dedicated, hard-working equipment operator to join our team of professionals. Learn and grow within our company; we promote from within and provide great benefits. This non-exempt position operates one or more types...SuggestedContract workFor contractorsNight shift
- Are you an experienced Forklift Operator who thrives in a fast-paced, industrial environment? We are looking for skilled drivers to join our wood processing team. In this role, you won't just be moving pallets in a clean, quiet aisle—you will be handling large, heavy,...SuggestedWeekly payImmediate startShift work
- ...procedures, best practices, and tooling improvements. You will assure safety and housekeeping rules are followed. You will plan, operate, and troubleshoot various types of equipment utilized to manufacture and overhaul marine components from start to post-work review....SuggestedPermanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shiftRotating shift
- ...of various types of conventional and/or computer numerical control (CNC) machine tools and their attachments to perform machining operations in the repair and/or manufacture of parts from raw stock. You will determine work procedures, machine, tools, equipment, and...SuggestedPermanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
- ...have experience driving a Tri Axle Dump Truck. This role requires a strong understanding of various driving techniques, including operating manual transmission vehicles. Milling and Paving experience preferred. Must be available during the day (between 6 am - 4 pm)....SuggestedNight shift
- ...best, most qualified people to join our team. Pre-employment drug testing (EOE) Great Benefits offered! Experienced Excavator Operator US-PA-Pottstown Job ID: 2026-2991 Category: Quarry Pottstown Divison Overview Reading Site Contractors (...Full timeFor contractorsShift work
- ...Old Dominion - - Responsibilities: Operate tractor-trailer combinations over long distances; Meet DOT regulations and pass medical/drug tests; Perform pre-trip inspections of vehicles; Unsecure freight for delivery and unloads freight at drop-off location; Available for...Long distanceShift work
$107k
...Old Dominion Freight Line is seeking a dedicated Line Haul Driver to join our OD Family Culture. As a Line Haul Driver, you will operate various tractor-trailer combinations over long distances, playing a key role in delivering our customers' freight with precision and...Temporary workLong distanceShift workNight shift- ...Experienced Material Handlers / Forklift Operators Wanted – Join Our Team in Coatesville, PA! Are you an experienced Sit-Down Forklift Operator looking for a stable, full-time opportunity? If you're confident handling heavy loads in a fast-paced industrial environment...Weekly payFull timeShift work
- ...Grader & Stacker, you'll help sort, grade, and stack lumber in a dynamic sawmill environment while supporting safe and efficient operations. This is an entry-level opportunity with paid training and room to grow. Employees who demonstrate strong attendance, safety...Full timeImmediate startShift workWeekend work
- ...by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As an Production Operator, you'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions...Night shiftAfternoon shift
- ...Machine Operator Ampcus Inc. is a certified global provider of a broad range of Technology and Business consulting services. We are in search of a highly motivated candidate to join our talented team. Location(s): King of Prussia, PA Job Summary: 2-5 years...Work at officeShift workWeekend work
$16.5 - $18.5 per hour
...Machine Operator We are currently hiring Machine Operators for a Mail Sorting Warehouse in Oaks, PA! This role is crucial for ensuring the smooth and efficient operation of mail production machinery, contributing directly to daily output goals and operational efficiency...Weekly payFull timeTemporary workCurrently hiringShift workNight shiftDay shift$20 - $25 per hour
...wage rate depends on experience and skill level. Beginner - $20-$25/hr. Intermediate - $26-28/hr. Advanced - $32+/hr. A CNC Machine Operator will know or be taught: Read and understand blueprints and job instructions Understand raw stock identification and preparation...Hourly payTemporary workDay shift- ...Lamination to join our manufacturing team. This role requires high-level technical expertise in machining processes and flame lamination operations to produce high-quality bonded components. The successful candidate will leverage strong mechanical aptitude, blueprint reading...Shift work
- ...the best, most qualified people to join our team. Pre-employment drug testing (EOE) Great Benefits offered! Heavy Equipment Operator US-PA-Pottstown Job ID: 2026-2941 Category: Contracting Pottstown Divison Overview The Pottstown Division...Full timeFor contractors
- ...will have a strong background in transporting oversized and overweight loads safely and efficiently. Key Responsibilities: Safely operate heavy haul trucks to transport oversized and overweight loads. Plan and execute routes that comply with state and federal regulations...Full time
$23.61 per hour
Haul Unit Operator page is loaded## Haul Unit Operatorlocations: Plymouth Meeting, PAtime type: Temps pleinposted on: Offre publiée aujourd'huijob requisition id: JR10014988Line of Business: AggregatesHeidelberg Materials is one of the world's largest suppliers of building...Hourly payTemporary work- Heavy Equipment Operator The Pottstown Division of H&K Group, Inc. is currently seeking an experienced and motivated Heavy Equipment Operator to become a part of our team. This position entails the operation of heavy equipment in order to achieve daily production goals...
- ...Heritage Fence Company is looking for a Heavy Equipment Operator to join our growing team! This role is a great opportunity for a SAFETY CONSCIOUS individual(s) with a minimum of 5 years of experience. We are celebrating 53 years in the fencing industry! We are focused...Hourly payFull timeTemporary workWork at officeWork visaWeekend work
- ...CNC Machinist II Cadrex is searching for a CNC Machinist II who will play a pivotal role in our manufacturing operations by efficiently operating and maintaining CNC machinery. This position requires a solid understanding of CNC operations, the ability to perform complex...Full timeTemporary workLocal areaRemote workAfternoon shift
$30 - $40 per hour
...medical device, and nuclear. Equipment includes Haas, Okuma, Doosan, Mazak, and other name brands. Job Duties: Set up and operate various CNC machines: CNC Mill, lathe, grinder and multi-axis machines Interpret blueprints, manuals and GDT symbols Math skills...Temporary workShift work- EnerSys Advanced Systems (EAS) is a specialized division of EnerSys-a global leader in stored energy solutions for industrial applications. EAS focuses on cutting-edge energy solutions for the aerospace, defense, and medical industries . As we continue to grow, we're...Permanent employmentTemporary workLocal areaFlexible hours
- ...Production Operator/ Assembler Join our dynamic team in our Assembly department where we assemble lawn and garden equipment! Responsibilities include: Assembles fabricated metal components, subassemblies, products, or systems, as specified by work orders, diagrams...Flexible hours
- What to Expect The Tesla Collision Repair Program is looking for a Collision Shop Paint Prepper to work on one of the most progressive vehicle brands in the world. This position will involve supporting the Tesla Collision Repair Program in all aspects. What You'll ...Hourly payFull timeTemporary workFlexible hours
- ...Job Description Job Description Large recycling/trucking company is looking for experienced equipment operator for our operations located in Telford, PA facility. OT hours and a great benefits package. Experience with loaders, grinders, excavators a plus Minimum...Full time
- ...Morrison Healthcare + We are hiring immediately for a part time **NUTRITION OPERATOR** position. + **Location** : Phoenixville Hospital - 140 Nutt Road, Phoenixville, PA 19460. _Note: online applications accepted_ _only_ _._ + **Schedule** : Part time schedule; Days and...Full timePart timeLocal areaImmediate startRemote workFlexible hours
$40 - $45 per hour
...Job Description Job Title: Machinist Pay: $40-$45 Hours: 1st Shift 8am-4:30pm Monday-Friday Job Description Set up and operate various manual machinery for fabricating a wide variety of component parts. Perform advanced setups and adjustments on lathes,...Weekly payContract workTemporary workWork at officeMonday to FridayDay shift- ...opportunity employer. Training is available for any candidate with good experience and aptitude to learn. Responsibilities: Operate machine tools to produce precision parts and instruments Modify parts and materials to improve overall production Test...Full timeDay shift
- ...Join United Plastics Machinery LLC as a Machinist and be a vital part of our innovative team in Exton, PA. In this role, you will operate and maintain precision machinery to product machinery, contributing to our mission of excellence in manufacturing. Responsivities...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Operator I. Be the first to apply!



