Ironworker
Commercial Steel Erection, Inc.
Ironworker (Full Time) Location: Madison Heights Department: Steel Erection Summary Works as member of crew to raise, place, and unite beams, columns, and other structural steel members to form completed structures or structure frameworks in a safe and consistent manner by performing the following duties. Essential Duties and Responsibilities Include the following. Other duties may be assigned. 1. Has practical knowledge of Regulatory Compliance with local, state, and federal Occupational Safety and Health Administration (OSHA), CSE, Inc. Rules and Regulations and Site-Specific Rules and Regulations. a. Understands OSHA standards relating to Steel Erection; understands and complies with CSE, Inc. Safety Program, rules, regulations and updates. b. Works within AISC Certification Procedures. c. Trained to safely operate forklifts, JLG type man-lifts, scissor-lifts and similar equipment. d. Observes 100% of tie-offs. 2. Follows directions and assumes responsibility of job essentials by: a. Assisting with inspecting and identifying hazards associated with operations. b. Assuming control of tools and equipment operated. c. Setting up hoisting equipment for raising and placing structural steel members. d. Fastening steel members to cable of hoist with wire rope or nylon slings. e. Unloading incoming steel, shakes out members and placing in lay down area. f. Knowing OSHA signals and if assigned, signals worker operating hoisting equipment to lift and place steel member. g. Assisting in set-up and knock-down of cranes. h. Bolting up structural steel members, welding, and otherwise assembling. i. Placing and securing metal deck components. j. When working above ground uses safety harness, lanyard, and beamer for proper tie-off. Supervisory Responsibilities None. Qualifications To perform this job successfully, an individual must be able to perform each essential duty safely and satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. US CITIZENSHIP AND A FEDERAL BACKGROUND CHECK IR REQUIRED. Education and/or Experience One - two years experience. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Mathematical Skills Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using units of American money and weight measurement, volume, and distance. Reasoning Ability Ability to apply common sense understanding to carry out instructions in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations Valid driver's license. Other Qualifications Must be able to travel. Must be able to pass a pre-employment drug screen. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee must regularly lift and /or move up to 50 pounds, frequently lift and/or move up to 100 pounds and occasionally lift and/or move more than 100 pounds. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles and outside weather conditions. The employee is occasionally exposed to vibration. The noise level in the work environment is usually loud. The employee is usually exposed to significant heights and small ledges. Benefits CSE offers competitive wages, vacation/personal time, medical, dental, vision, and other competitive benefits, including a 401k plan.
INTENT AND FUNCTION OF JOB DESCRIPTIONS
Job descriptions assist organizations in ensuring that the hiring process is fairly administered and that qualified employees are selected.They are also essential to an effective appraisal system and related promotion, transfer, layoff, and termination decisions.Well-constructed job descriptions are an integral part of any effective compensation system. All descriptions have been reviewed to ensure that only essential functions and basic duties have been included.Peripheral tasks, only incidentally related to each position, have been excluded.Requirements, skills, and abilities included have been determined to be the minimal standards required to successfully perform the positions.In no instance, however, should the duties, responsibilities, and requirements delineated be interpreted as all inclusive.Additional functions and requirements may be assigned by supervisors as deemed appropriate. In accordance with the Americans with Disabilities Act, it is possible that requirements may be modified to reasonably accommodate disabled individuals.However, no accommodations will be made which may pose serious health or safety risks to the employee or others or which impose undue hardships on the organization. Job descriptions are not intended as and do not create employment contracts.The organization maintains its status as an at-will employer.Employees can be terminated for any reason not prohibited by law. #J-18808-Ljbffr Commercial Steel Erection, Inc.- Berger Steel Corp. seeks an Experienced Field Foreman Ironworker/Welder to lead welding on structural iron and steel erection projects. Most work is in the San Francisco Bay Area and Sacramento Region. Full-time permanent role with overtime; must be within commuting distance...SuggestedDaily paidPermanent employmentFull time
$45 - $55 per hour
Experienced Field Foreman Ironworker/Welder Pay: $45.00 - $55.00 per hour Summary You will be responsible for leading all operations on welding on structural iron, steel erection, and completing the tasks in a timely, quality manner. All of our projects are typically...SuggestedHourly payDaily paidPermanent employmentFull timeNight shift- Commercial Steel Erection, Inc. seeks an Ironworker (Full Time) in Madison Heights. The role involves raising, placing, and joining structural steel members to complete building frameworks, while adhering to safety programs and site procedures. The position requires OSHA...SuggestedFull time
- Scaffold Technician II - WNS & Kuparuk - Mechanical Group ABOUT ASRC ENERGY: WINNER OF THE BEST PLACE TO WORK BY ALASKA BUSINESS MAGAZINE IN 2023, 2024 & 2025 ASRC Energy Services, LLC is part of the Alaska Native corporation, Arctic Slope Regional Corporation (ASRC) family...SuggestedTemporary workImmediate startRemote workWorldwideShift workNight shiftDay shift
- Mid-State Welding in Clinton, MS is seeking a Structural Steel Fitter to read shop drawings, lay out assemblies, and fit parts with precision in an indoor steel fabrication shop. You will work around cranes, welding, grinding, and cutting operations, and must follow safety...Suggested
$23 per hour
Impact Fire ServicesEstablished in 2009, Impact Fire Services was the vision of a group of experienced industry professionals that wanted to build a best-in-class fire protection and life safety company. Through superior customer service and technical expertise, we have...Temporary workApprenticeshipWork at office$23 per hour
Fire Sprinkler Technician Impact Fire Services is looking for a Fire Sprinkler Technician. Salary Range - $23.00 an hour to $35.00 an hour based on experience. Required Experience/Qualifications Minimum 3+ years' fire sprinkler inspection and service experience...- Choctaw Global seeks a Quality Assurance Technician to uphold strict quality standards across raw materials, in-process components, and finished products. You will use precision instruments to verify dimensional accuracy, document results, and support root-cause analysis...
$24 - $30 per hour
EXPERIENCED Combination Pipe Welder/Pipe Fitters for the Cade, LA, and surrounding area. Job Scope Pipe welders join and repair pipes, tubular components, and assemblies to specified standards. Pipe welders typically work on-site, often in cramped conditions and harsh...Hourly payWeekly payImmediate startMonday to FridayWeekend work- EMCOR Group is seeking a Fabricator for their Fire Fabrication Shop located in Kentucky. This role involves fabricating pipe for fire protection systems, requiring attention to detail and a strong work ethic. Qualified candidates should be dependable, able to communicate...
- Page Mechanical Group, Inc. is seeking an experienced Combination Pipe Welder/Pipe Fitter for the Cade, LA area. On-site work involves joining and repairing pipes and fittings, reading blueprints, and verifying dimensions with tape measures. The role requires welds in multiple...
- Tank And Specialty Vessel WelderResponsible for performing welding and grinding functions per job specifications. Selects equipment and plans layout and assembly of welding. Works closely and interacts with supervision. Works with precise limits and standards of accuracy...Full timeRelocation
$72.8k - $87.5k
About the Role The Building Systems Technician monitors, maintains, and troubleshoots abnormal conditions in building systems that support ZT’s 24x7 manufacturing environment, including major electrical, mechanical/HVAC systems, and a centralized chiller plant and generators...Permanent employmentFor contractorsLocal areaRemote work$72.8k - $87.5k
Building Systems TechnicianThe Building Systems Technician will monitor, maintain, and troubleshoot abnormal conditions in building systems that support ZT's 24x7 manufacturing environment, including major electrical systems, mechanical/HVAC systems, including a centralized...Permanent employmentFor contractorsWork at officeLocal areaRemote work$35 - $45 per hour
Overview: WHY COOLSYS? At CoolSys, we offer more than just a job?we provide stability, growth, and industry-leading benefits for our employees. No wonder Newsweek named CoolSys one of America?s Greatest Workplaces! As a large company serving diverse customers, we invest...Hourly payWork experience placementLocal areaRelocation package$28 - $38 per hour
Benefits: Tools Provided Uniforms Provided Overtime Potential Bonus Opportunities Up Closets, a leading provider of custom closet solutions, is seeking a skilled trim carpenter to join our team on a part-time basis. We are looking for someone...Hourly payPart timeFlexible hours$22 - $25 per hour
Join the kingdom! By raising the standard, we turn the ordinary into the extraordinary! With over 30+ years in the production industry, Drape Kings, a Quest Events Company, has cemented itself as the premier event services provider! We are excited to bring together the...Hourly payCasual workWork at officeFlexible hours- Job Description Job Description Accurate Specialty Metal Fabricators is seeking an experienced Welder / Metal Fabricator with strong TIG and MIG welding experience to fabricate high-end architectural metal systems for commercial construction projects. Union enrollment...Full timeFor contractorsLocal areaMonday to Friday
$44.51 per hour
JLL empowers you to shape a brighter way . Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented peopleand empowering...Hourly payDaily paidFor contractorsCasual workWork at officeLocal areaMonday to FridayShift work$22 - $26 per hour
Description ABOUT THE ROLE JFT is growing and hiring Welders at multiple skill levels in Loveland, CO. All applicants are encouraged to apply and will be considered based on their experience level, and welding test performance. Applications will be reviewed on a rolling...Hourly payPermanent employmentWork experience placementImmediate startVisa sponsorshipWork visa- Select how often (in days) to receive an alert: Create Alert Additional Locations: Requisition ID: 27708 Smeal, a REV Group brand, is recognized as a premier manufacturer, inventor, and innovator of custom fire apparatus. The company offers a full line of custom and commercial...Worldwide
$24 - $30 per hour
Description The Welder II is a full-time position that will operate out of the L&L Fabrication Greeley Weld Shop. This position will be expected to weld at a CODE level whether the project they are working on is Code or Non-Code, a common material or uncommon material. ...Full time$20 - $30 per hour
Job: Welder Location: Marietta, OH Job Type: Full-Time | Temp-to-Permanent Shift: Monday to Friday | 6:30 AM to 3:00 PM Department: Fabrication Pay: $20.00 to $30.00 per hour (based on experience and practical skills test) NOTE: This job is in Marietta, Ohio and is on site...Hourly payPermanent employmentFull timeTemporary workMonday to FridayShift workDay shift- The Welder position is responsible for the repair, modification, and fabrication of equipment, mining facilities, and other materials used in the operations of the company. Minimum Qualifications Prior welding experience in an industrial or shop environment Ability to...Monday to FridayWeekend workDay shift
- Company Description Job Description The New York City Department of Homeless Services (DHS) is the largest organization in the United States dedicated to preventing and addressing homelessness. In partnership with other City agencies and nonprofit organizations...Temporary workWork at office
- Overview ViaPath is looking for a Telecommunication Technician 3 (Site Admin Technician 3) to join the Field Services team. Under the direction of the Field Service Manager, but working largely independently without and/or limited direct supervision, provide remedial repair...Full timeTemporary workLocal areaFlexible hoursNight shift
- Group Worker - Summer Hourly Rate: $ 19.0962 Position Type: Hourly (Non-Exempt) Schedule: Monday–Friday, 11:00 AM – 6:00 PM (shifts vary) Program Dates: July 1 – August 14 Location: HANAC PS2, 21-15 75th Street, East Elhurst, NY 11370 About HANAC, Inc. ...Hourly payContract workSummer workMonday to FridayShift work
- Infinity Natural Resources (NYSE: INR), is an oil and gas exploration and production company deeply rooted in the Appalachian Basin. Headquartered in Morgantown, WV, we are committed to responsible energy development, operational excellence, and strong environmental stewardship...Work at officeRemote workFlexible hoursShift work
- Job Description The position requires leadership skills to manage a 4-man crew in plugging and abandonment of existing gas wells. Candidate must be experienced (10 years minium) in the following areas: Qualifications Well Control including killing wells with fluid, nippling...
$24 - $30 per hour
L&L Fabrication, Inc. in Colorado is seeking a Welder II to operate at a CODE level in our Greeley Weld Shop. The role requires agility to switch between welding, fitting, and team support while maintaining safety and quality on both Code and Non-Code projects. The position...Hourly pay
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Ironworker. Be the first to apply!


