Dual Coating & Welding Inspector
$50.49 per hourE2 Consulting Engineers
US-IL ID
IL-6262 Category
Inspectors Type
Full Time Work Location
Onsite About the Organization
E2 Consulting Engineers, LP (E2) is a professional services firm established in 1988 specializing in a full spectrum of engineering services including, project engineering and design, federal base operations and infrastructure support services, gas pipeline construction and inspection services, environmental consulting and remediation, and information technology services. At E2, we value safety, innovation and collaboration, and we are dedicated to excellence.
OverviewE2 Consulting Engineers is seeking a qualified Dual Coating & Welding Inspector to support Nicor Gas natural gas pipeline construction projects across Illinois. This specialized dual-certified role combines expertise in both welding inspection and field-applied coating inspection to ensure the highest standards of quality, safety, and compliance on pipeline construction and integrity projects.
The Dual Coating & Welding Inspector plays a critical role in verifying welder qualifications, welding procedures, weld quality, and coating application. This position requires strong technical knowledge of welding codes (API 1104, ASME B31.8) and coating standards, along with the ability to perform comprehensive field inspections across both disciplines.
Responsibilities Welding Inspection & Quality Assurance- Verify that welding procedures are properly qualified and utilized on the project.
- Confirm that all welders are qualified for the work they are performing and that qualifications are current.
- Monitor weld quality to ensure sound welds are produced at all joints in accordance with applicable codes and Company specifications.
- Verify that repairs made to correct weld defects properly address the issue and meet code and specification requirements.
- Ensure all welding materials are of the proper type and quality, stored correctly, and that damaged materials are not used.
- Maintain detailed weld mapping, as-built documentation, and proper material traceability (MTRs).
- Inspect field-applied coatings on pipe, fittings, valves, and joints to verify compliance with Company procedures and manufacturer instructions.
- Perform coating inspections including holiday detection (jeeping), mil thickness verification, and hardness testing.
- Witness all HDD pull-throughs to verify coating protection and examine the leading edge for coating damage.
- Complete all required pre-backfill, pre-pull, and post-HDD coating verification checks.
- Inspect Other Contractors' work for compliance with permit and one-call requirements.
- Verify proper material usage, equipment, and safety measures on the jobsite.
- Complete Daily Inspection Reports, coating inspection forms, safety forms, and other required documentation accurately and thoroughly.
- Witness hydrostatic testing and verify equipment calibration documentation.
- Maintain proactive communication with the Chief Inspector regarding daily issues, anticipated problems, and resource needs.
- AWS Certified Welding Inspector (AWS CWI, SCWI, or CPWI accepted).
- NACE CIP Level 1 (or current AMPP equivalent).
- Minimum of 3-5 years of pipeline construction and/or inspection experience (combination of welding and coating experience preferred).
- Strong knowledge of welding techniques, procedures, consumables, and weld preparation.
- Ability to read and interpret construction drawings, alignment sheets, and valve maps.
- Familiarity with DOT 192 and OSHA regulations.
- Knowledge of applicable codes and standards: API 1104, ASME B31.8, NACE, and SSPC.
- Proficient in Microsoft Word and Excel.
- Strong attention to detail with the ability to maintain accurate weld mapping and documentation.
Preferred
- Experience on urban natural gas transmission pipeline projects.
- Additional NDT certifications (e.g., MT or PT Level 1).
- AMPP CIP Level 2 or higher.
- Experience with horizontal directional drilling (HDD) coating inspection.
E2 Consulting Engineers, LP offers an excellent benefits package including health, dental, vision, and life insurance, 401(k) with employer match.
Wage Data Per State RequirementsThis role will pay $50.49 an hour depending on experience.
Work Environment/Physical Demands- Construction Sites and/or Client Right-of-Way (R.O.W.)
- Client testing facility (occasionally)
- Corporate office (occasionally)
- Reports to the Chief Inspector, based locally with respect to the projects.
- May require extensive driving to reach job sites and/or client/E2 offices.
- Frequent ascending and descending of ladders, stairs, scaffolding, ramps, poles, and the like, using feet and legs and/or hands and arms up in and out of pipeline bell-hole / trench / excavation.
- Maintaining body equilibrium to prevent falling and walking, standing, or crouching on narrow, slippery, or erratically moving surfaces.
- Lifting objects in excess of 50 pounds from a lower to a higher position or moving objects horizontally from position to position
- Ability to perform visual inspection of construction crew quality of work; using measuring devices; and/or assembly of fabrication parts at distances close to the eyes.
- Able to perform in both inside and outside environmental conditions in all four seasons throughout the continental United States - extreme cold (temperatures below 32 degrees Fahrenheit) and/or extreme heat (temperatures above 100 degrees Fahrenheit) for periods of more than one hour.
- May require extensive driving to reach job sites and/or client/E2 offices.
E2 Consulting Engineers, LP is a Drug Free Workplace. After accepting an offer of employment, applicants may be required to undergo background checks, drug testing, and/or fit-for-duty physical examination. Drug screens will include, but not be limited to, Amphetamines, Cocaine Metabolites, Marijuana Metabolites (THC), Opiates, and Phencyclidine (PCP). As a federal contractor, E2 cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician.
SolicitationPlease no solicitation of any kind from agencies, staffing, or recruiting firms.
EEO StatementAll qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
$57.33k - $78.76k
Foundry Production Supervisor Mueller, the nation's leading manufacturer of flow control devices for the water and gas distribution industries, has an immediate opening in our Decatur, Illinois manufacturing plant for a Foundry Production Supervisor. The Decatur Operations...SuggestedFull timeTemporary workWork at officeLocal areaImmediate startShift work- ...you take pride in meeting ASME Section VIII, Division 1 standards and enjoy collaborating directly with inspectors, this role is for you. What you’ll do Weld to customer specifications, applicable code, and recognized industry practices Run FCAW with confident...SuggestedFull timeMonday to FridayShift work
- ...specifications, drawings or isometricsPass a bend test on a 2-inch schedule 160 carbon steel pipe in 6G position using gas tungsten arc welding (GTAW, TIG, Heliarc) root and hot pass and shielded metal arc welding (SMAW, stick) fill and cap to become certifiedComplete work...SuggestedFlexible hours
$125k - $150k
Join Our Team at voestalpine Railway Systems Nortrak! Embark on a rewarding career journey with voestalpine Railway Systems Nortrak, North America's premier designer and manufacturer of special trackwork. With a legacy spanning 160 years, we lead the industry in shaping...SuggestedWorldwideShift work$75k - $90k
...maintain consistent mold quality while reviewing system trends and implementing corrective actions to eliminate variation. Review welding‑repair procedures for manganese castings, support welders with proper preheat, interpass‑temperature control, and filler‑metal...SuggestedWorldwideShift work- ...specifications, drawings or isometricsPass a bend test on a 2-inch schedule 160 carbon steel pipe in 6G position using gas tungsten arc welding (GTAW, TIG, Heliarc) root and hot pass and shielded metal arc welding (SMAW, stick) fill and cap to become certifiedComplete work...Flexible hours
- ...Schedule: Monday–Friday Team Environment: Work alongside skilled welders, craftsmen, installers, and foremen Responsibilities Weld steel components for docks, boat lifts, and other marine structures Assist in fabrication and assembly of custom dock sections,...Permanent employmentFull timeMonday to Friday
- Job DescriptionRegional Quality and Food Safety Manager Can be located at any Ag Services - ADM U.S. facilityThis is an exempt position.Position Summary:The Regional Manager, Quality & Food Safety is responsible for a unified approach for quality, food safety and standard...Hourly payLocal areaWorldwideRelocation packageFlexible hours
- ...hot/cold, inside/outside). Candidate will use a variety of hand and power tools, such as impacts, wrenches, as well as equipment for welding, brazing, and cutting. Responsibilities and Duties Ensures proper operation of large industrial equipment such as power generators,...For contractorsImmediate startShift work
- Job Title Mechanical Technician Work Year 260 days Department MSD Decatur Township Schools Operations Reports To Assistant Director of Facilities SUMMARY The Mechanical Technician will perform duties for Decatur Township throughout the assigned working location of MSD...Immediate startShift work
$30 - $40 per hour
Industrial / Manufacturing Engineer – CNC Tube BendingThis position seeks an Industrial / Manufacturing Engineer with strong expertise in CNC tube bending to design, develop, and optimize metal tube forming processes. The role focuses heavily on advanced tube-bending applications...Contract workTemporary workWork at office$112.71k - $169.06k
...footprint, with responsibility spanning structural fabrication, welding, machining, assembly, and inspection. You will collaborate with... ..., or a related technical discipline.AWS Certified Welding Inspector (CWI) certification or equivalent welding qualification.Experience...Full timePart timeWorldwideRelocationRelocation packageFlexible hours- Job DescriptionProcess Safety Engineer - Decatur, ILAs the Process Safety Engineer, you'll be at the forefront of leading change. Your role will be to own the implementation of progressive ADM Process Safety Management (PSM) systems, not just to meet, but to exceed, corporate...Hourly payFor contractorsLocal areaWorldwideLong distanceFlexible hours
- Manufacturing Engineer || Decatur, Illinois (100% onsite) Job Summary: • MBOM creation using Vismockup. • Standard work updates • Station Layout updates and Optimization • Material layout and Material flow optimization • Read and interpret Engineering drawings...
- Manufacturing EngineerWe are seeking an experienced Manufacturing Engineer to support production operations, new product introductions (NPI), and capital installations. The ideal candidate will have a strong background in Manufacturing or Industrial Engineering and be ...
- Manufacturing/Process EngineerThe customer is looking for a hands-on manufacturing/process engineer focused on factory layout, material flow, production efficiency, and manufacturing documentation. 5–10 years Manufacturing Engineer / Industrial Engineer experience + heavy...Local area
- Process Engineer Job Location: Decatur, Illinois/Lafayette, Indiana Remote/Onsite: Onsite Benefits: Medical, Dental, Vision, 401K plan, PTO Job Type: Full Time/Contract Duration: Long term Project Number of positions: 01 Hiring Timeline: 2-3 weeks Job Summary ...Full timeContract workFor contractorsLocal areaRemote work
- The Job The primary role of the process engineer is to develop, implement and ensure optimal, cost-effective manufacturing processes and methods in accordance with product specifications and quality standards. This also includes providing support for new or revised ...Full timeCasual workWork at officeMonday to FridayAfternoon shift
- Job DescriptionProcess Automation Engineer - Decatur, ILThis is a full time, exempt positionJob Description:The Process Automation Engineer will provide support for the industrial control systems across the ADM Decatur complex to maintain and improve operations through ...Hourly payFull timeFor contractorsWorldwideFlexible hoursWeekend work
- Job Description Job Description ALIGN PRODUCTION SYSTEMS Manufacturing Applications Engineer Reports To Plant Manager (day-to-day) | Dotted line to Director of Engineering Operations Location Decatur, Illinois — On-Site Required Type Full-Time...Full timeRemote work
$31.25 - $33 per hour
Job Description Job Description Job Title: Manufacturing Engineer Job Description The Manufacturing Engineer supports new manufacturing initiatives by driving manufacturing readiness for new products, processes, and technologies. This role collaborates closely...Contract workTemporary work- Overview A manufacturing engineer's activities in a factory paint shop are crucial for ensuring high-quality finishes, efficient operations, and continuous improvement. Responsibilities Process development and optimization Developing and implementing painting processes...
- ## Process Technology EngineerApplylocations: Decatur, ILtime type: Full timeposted on: Posted Todayjob requisition id: JREQ6836Process Technology Engineer | Primient# **About Primient**Primient is a century old company with an entrepreneurial spirit. We are a leading producer...Temporary work
- Process Control EngineerLocation- On-Site /IL-DecaturTypical task breakdown:Implementing product supply strategies aligned with the category management supply strategies that will create a competitive advantage for our customers by developing, optimizing, and integrating...InternshipImmediate start
$125k - $150k
Job Description Job Description Join Our Team at voestalpine Railway Systems Nortrak! Embark on a rewarding career journey with voestalpine Railway Systems Nortrak, North America's premier designer and manufacturer of special trackwork. With a legacy spanning...WorldwideShift work- Automation and Controls EngineerDecatur, Illinois Full Time Experience: 7 - 15 YearsPosition Summary:The Controls Engineer performs engineering design and installation services for automated process equipment, facility systems, and software systems. The incumbent performs...Full timeWork experience placementShift work
- Job Title The primary accountability of this position is to support the 24/7 Float Glass manufacturing production, scheduling, cutting, processing, closing and inventory of glass products to assure optimization of the supply chain to meet customer requirements. Provides...
- ...orders, schematics, or instructions; creates working procedure based on specifications.Gathers equipment and materials for the job.Welds, cuts, bends, threads, solders, and fits pipes.Attaches pipes and piping systems to walls using brackets, bracket systems, or clamps...For contractorsImmediate startShift work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Dual Coating & Welding Inspector. Be the first to apply!


