Light Equipment Operator

Sheffield Precision Building Llc

Job Description

Position Summary

Sheffield Precision Building is seeking a dependable and motivated Light Equipment Operator to join our team. This position involves operating construction equipment, driving trucks and trailers, delivering materials and equipment, and assisting with site development for new residential construction projects.

Responsibilities

Operate skid steers, mini excavators, and excavators safely and efficiently.
Drive trucks and pull trailers to transport equipment and materials between job sites.
Deliver, place, move, and retrieve roll-off dumpsters as needed.
Clear and prepare lots for new home construction.
Perform grading and site preparation work.
Dig footers and foundations.
Install septic systems and related site utilities.
Conduct daily equipment inspections and maintain a clean, safe work environment.
Perform routine maintenance on trucks and equipment, including oil changes, brake service, greasing, and other preventative maintenance tasks.
Assist with general construction and site work as needed.

Qualifications

Previous experience operating skid steers and excavators required.
Experience driving trucks and pulling equipment trailers required.
Ability to safely load, transport, and unload construction equipment.
Mechanical aptitude and experience performing routine maintenance on diesel trucks and equipment preferred.
Knowledge of grading, excavation, septic installation, and site development is a plus.
Valid driver's license required; CDL is a plus but not required.
Ability to work outdoors in varying weather conditions.
Dependable, self-motivated, and able to work independently with minimal supervision.

Preferred Experience

Residential site development and land clearing.
Septic system installation.
Equipment maintenance and repair.
Diesel engine and hydraulic system knowledge.

Compensation: Highly Competitive pay based on experience

Company: Sheffield Precision Building
Location: Newton, NC

Join a growing company focused on quality residential construction and take pride in helping build homes from the ground up.

\nCompany Description

Sheffield Precision Building is a growing residential construction company serving Lincoln and Catawba Counties. We build quality single-family homes, including both custom homes and spec homes, with a strong commitment to craftsmanship and attention to detail in every project.

Company Description

Apply

Vacancy posted 20 days ago

Similar jobs that could be interesting for youBased on the Light Equipment Operator in Maiden, NC vacancy

Yard Loader Operator
...The ideal individual will be safety conscious, dependable, and motivated. This individual will be responsible for safely and efficiently operating a Yard Loader and maintaining Loader, Loader Operator, Yard, Operator, Operations, Manufacturing, Construction, Equipment...
Suggested
Martin Marietta
Maiden, NC
2 days ago
Equipment Operator
$20.65 per hour
...is looking for dedicated individuals like you to join our team! The reach truck / high-level stock picker is responsible for operating equipment to move, locate, relocate, stack, and count merchandise. The Equipment Operator is accountable for the safe and efficient operation...
Suggested
Relocation
Relocation package
Night shift
Day shift
Arhaus Recruiting
Conover, NC
1 day ago
Sanitation Equipment Operator I
...Job Title To perform routine operation of large trucks and other automotive equipment in the municipal sanitation division of the Public Works and Utilities Department Job Description Employees in this class primarily operate large specialty trucks designed to...
Suggested
City of Newton
Newton, NC
3 days ago
Class A Dump Truck Driver
...suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with... ...Demonstrated ability to safely operate commercial vehicles and equipment. - Strong commitment to safety, compliance, and responsible driving...
Suggested
Weekly pay
Temporary work
Flexible hours
51920 - HM SEFA Transport LLC
Denver, NC
4 days ago
Short Haul Tractor Trailer Delivery Driver
...Driver will pick up and drop off customer tires and wheels while operating a 53' Tractor Trailer with a max capacity up to 80,000 pounds.... ...Support warehouse/service staff with tire handling and equipment use Communicate effectively with customers and management regarding...
Suggested
Temporary work
Monday to Friday
Night shift
Snider Fleet Solutions
Newton, NC
4 days ago
Long Haul Tractor Trailer Delivery Driver
...delivering and picking up Snider customer tires and wheels while operating a 53' Tractor Trailer with a max capacity up to 80,000 pounds.... ..., etc. Responsible for the cleanliness, maintenance, and equipment inventory levels on tractor-trailer and on person. Maintain...
Temporary work
Night shift
Snider Fleet Solutions
Newton, NC
4 days ago
Dye Jet Operator
$16 per hour
...Job Description Job Description Job Title: Dye Jet Operator Location: Maiden, NC Shifts Available: 3rd Shift: Monday – Friday... ...through careful monitoring, inspection, and maintenance of equipment. Core Duties and Responsibilities: · Prepare dyeing...
Hourly pay
Monday to Friday
Shift work
Night shift
Arthur Services, Inc.
Maiden, NC
3 days ago
CNC Router Operator
Job Title Use suction lift to move plywood sheets to milling board on table for inspection and prep prior to loading the router. Slide plywood sheet and milling board from roller table to router and fit into place. Load/Select work order on touch screen and initiate...
Full time
Temporary work
Part time
Flexible hours
Ethan Allen
Maiden, NC
1 day ago
Machine Operator
$18 - $19 per hour
...client, a leading manufacturing organization, is seeking a Machine Operator to join their team. As a Machine Operator, you will be part of... ...pm-7 am), 3/2/2/3 Work Schedule What's the Job? Operate equipment including winders, saws, core machines, start/stop winders,...
Permanent employment
Temporary work
Flexible hours
Shift work
Night shift
Manpower
Newton, NC
15 hours ago
Folder Gluer Operator
...Folder Gluer Operator Smurfit Westrock (NYSE:SW) is the go-to leader and partner of choice in sustainable packaging. We are dedicated... ...policies and procedures, i.e. SQF, safety, etc. Protective Equipment Required: Safety glasses, ear plugs, Appropriate Gloves,...
Full time
Temporary work
Immediate start
Shift work
Night shift
WestRock
Claremont, NC
2 days ago
Coating Operator - Weekend Shift
...rapidly and need top-notch technicians to work on state-of-the-art equipment and controls. We are building a world-class team of... ...and be a part of a winning team. Job Description Machine Operators to run coating machine on weekend shift - Shift Schedule will...
Shift work
Night shift
Weekend work
Day shift
Bosch Group Inc
Lincolnton, NC
2 days ago
Assistant Machine Operator - Night shift
$19 per hour
...Assistant Machine Operator - Night Shift $19.00/Hour | 7:00 PM - 7:00 AM | 2-2-3 Schedule Manufacturing doesn't stop when the... ...team. This role is ideal for someone who enjoys working with equipment, takes pride in producing quality work, and understands the importance...
Full time
Immediate start
Shift work
Night shift
Manpower
Newton, NC
2 days ago
Coating Operator - Weekend Shift
...Coating Operator - Weekend Shift Machine Operators to run coating machine on weekend shift - Shift Schedule will be two weekends of 6:30am to 6:30pm with the third weekend being a night shift 6:30pm to 6:30am schedule. Work 24 hours and get paid for 32. Hiring process...
Shift work
Night shift
Weekend work
Day shift
Bosch Group
Lincolnton, NC
2 days ago
Mill Operator
...Mill Operator At Mennel, we believe in doing right and bringing our best to our people who are helping to feed the world. We promote... ...with mill changes and daily operations. Assists with mill equipment repairs and routine maintenance, as needed/required....
Work at office
Shift work
Weekend work
The Mennel Milling Company
Newton, NC
5 days ago
Baler Operator
...Baler Operator Smurfit Westrock (NYSE:SW) is the go-to leader and partner of choice in sustainable packaging. We are dedicated to creating efficient and scalable paper and packaging solutions to help solve complex packaging challenges. Guided by our values of safety...
WestRock
Conover, NC
1 day ago
Crane Operator
...Job Description: A Crane Operator is responsible for operating cranes to lift, move, position, and reposition loads safely and... ..., routine maintenance, and basic troubleshooting on crane equipment. • Interpret load charts and lift plans to determine crane capacity...
Shift work
Blythe Construction
Catawba, NC
2 days ago
Production Line Operators
$20 - $21.5 per hour
...Production Line Operators Lincolnton, NC Overview Looking for a stable, high-paying job with a clear path to a long-term career... ...parts for quality and conformity to specs Assist with equipment and product changeovers Maintain a clean and safe work environment...
Hourly pay
Weekly pay
Full time
Contract work
Temporary work
Shift work
Night shift
Afternoon shift
Onin Staffing
Lincolnton, NC
2 days ago
Press Operator - 2nd Shift
$18 - $21 per hour
...requirements, in accordance with Pregis policies and procedures. Press Operator Overview: Must have the technical ability to operate all types of full converting line and finishing equipment within Pregis standards for waste, quality, and productivity. Understands...
Hourly pay
Full time
Local area
Shift work
Afternoon shift
Pregis
Conover, NC
2 days ago
Carpenter
PC is seeking Carpenters to work in Newton, North Carolina. Candidates should be well-rounded, work as part of a team, complete work independently, be highly motivated, and be focused on excellence in all aspects of the work. Responsibilities include rough carpentry, doors...
For contractors
PC Construction
Newton, NC
2 days ago
Skilled Forklift Operators
...Skilled Forklift Operators Now Hiring Skilled Forklift Operators in Newton, NC! Hire Dynamics is partnered with a Client in Newton, NC looking to hire multiple forklift operators. Shift: Monday-Thursday | 5:30pm-4:00am Pay: $21 per hour, paid weekly! PIT Operators will...
Hourly pay
Weekly pay
Immediate start
Shift work
Hire Dynamics
Newton, NC
3 days ago
General Machine Operator
$17 per hour
...Position Summary We are seeking entry level Machine Operators for immediate hire in Huntersville, NC. This position is responsible for operating, monitoring, and maintaining production equipment to ensure efficient operations, product quality, and workplace safety...
Hourly pay
Full time
Temporary work
Immediate start
Night shift
NCW
Denver, NC
5 days ago
Grading Operator
$18 - $27 per hour
...Job Description Join JT Russell & Sons as a Full-Time Grading Operator and be part of a dynamic team that values innovation and... ...will have the opportunity to safely operate various pieces of equipment to achieve precise location and grading as outlined in the plans...
Full time
Temporary work
For contractors
Work at office
Flexible hours
JT Russell and Sons
Conover, NC
24 days ago
Machine Operator
$20 - $28 per hour
...Machine Operator (Print Production) 1st Shift | Monday-Friday | 7:00 AM - 3:30 PM Pay Rate: $20.00-$28.00/hr based on experience... ...accuracy and consistency Use laminators, cutters, and trimming equipment Troubleshoot minor machine issues and assist with basic...
Contract work
Temporary work
Monday to Friday
Shift work
Day shift
Aerotek
Lincolnton, NC
3 days ago
Machine Operator - Climate Controlled Environment! Starting Pay $17.50 - $22.75 / hr.
$17.5 - $22.75 per hour
...Machine Operator - Climate Controlled Environment Starting Pay $17.50 - $22.75 / hr. Location: Lincolnton, NC, US Company:... ...developing the skills required to manage material flow, monitor equipment operations, make necessary adjustments, and ensure product quality...
Local area
Shift work
Night shift
Day shift
AptarGroup
Lincolnton, NC
3 days ago
Carpenter
Responsibilities: Brasfield & Gorrie is currently accepting applications for a Carpenter . Below are the main responsibilities for this position. (This description may not include all duties required of this position) Build rough wooden structures, such as vertical...
Temporary work
Brasfield & Gorrie
Conover, NC
4 days ago
Machine Operator - 2ND SHIFT
...Machine Operator - 2ND SHIFT Bosch Location Lincolnton, NC Division Power Tools Work Mode On-Site Fields of work Manufacturing Join as Production & Warehouse Workers Contract Type Unlimited Working time Full-time Compensation According to agreement Your tasks...
Full time
Contract work
Work at office
Local area
Overseas
Shift work
Afternoon shift
Bosch Group
Lincolnton, NC
2 days ago
Slitter Operator
Job Title Job Description Produce 1st quality material with minimal waste and downtime in a safe and efficient manner while achieving key performance indicators (KPI). Maintain a clean and safe work environment. Calculate and coordinate the raw materials needed for...
MRINetwork
Lincolnton, NC
2 days ago
Carpenter
...interpreting blueprints under supervision. Maintaining tools and equipment to ensure efficiency and safety. Working collaboratively with... ...work adheres to building codes and quality standards. Operating and maintaining heavy-duty carpentry tools and equipment. Assisting...
Temporary work
Second job
SMITH ROWE, LLC
Catawba, NC
2 days ago
Production Line Operator
$18 per hour
...Production Operator (Production Line Inspector) At SARSTEDT, we develop, manufacture, and distribute high-quality devices and consumables for medicine and scientific applications. Known for reliability and performance, our solutions are designed with a focus on safety...
Hourly pay
Worldwide
Monday to Friday
Flexible hours
Shift work
Night shift
Day shift
Afternoon shift
SARSTEDT, Inc.
Newton, NC
3 days ago
Manual Cutter - Upholstery
...all areas of the business and are proud to be family-owned and operated since 1987. Together, we furnish life's best moments, from the... ...(hot/cold weather). This role routinely uses standard office equipment such as computers, phones and photocopiers. Other Duties...
Summer work
Work at office
Summer Classics
Claremont, NC
5 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Light Equipment Operator. Be the first to apply!