CNC Set-up Machinist

Billet Industries

Main Job Duties
Setup & operate CNC Mills/Lathes to fabricate metallic and nonmetallic parts.

Key Objectives

Setup and operate CNC Mills/Lathes - Utilize knowledge of working properties and machining processes for a wide variety of materials such as stainless steel, Monel, Hastalloy, other nickel alloys, cast iron, carbon steel, bronze, aluminum, plastics, etc.
Manufacture components within the allotted time estimates provided on job travelers.
Ensure customer satisfaction with products and service.
Make process recommendations for improved efficiency and works with the CNC Programmer to optimize processes, programs and cutting tools.
Take a proactive approach to continuous improvement including productivity, quality, safety, environmental and ergonomics.

Essential Job Functions

Setup, and operate various CNC equipment with minimal supervision.
Must have Proficient Knowledge of a variety of controls (Mazak, Fanuc, etc) with the ability to perform manual CNC program edits as required to complete job work scope.
Read and interpret customer drawings with an understanding of Geometric Dimensioning and Tolerances per ANSI Y-14.5.
Inspect work produced (1st piece and in-process inspection) using precision measuring equipment including: micrometers, bore gauges, dial calipers, or other measuring instruments to verify conformance to specifications. Maintain tolerances as close as 0.002" over 55" diameter.
Where required, document inspection results on supplied IDS Sheets and/or Inspection Prints.
Keep equipment (machine, gauging, tooling, etc) clean and well maintained and maintain a clean and orderly work area.
Follow preventative maintenance procedures on equipment as prescribed by supervisor and report operating difficulties of equipment.
Document daily activities to assure performance in accordance with job standards.
Work effectively with peers and management in a team-oriented environment, assisting/training other employees as required.
Willing to work overtime when needed to satisfy customer requirements.
Employee may be required to operate forklifts and have the ability to safely rig and handle product up to 2 tons.
Must be able to stand, twist, bend, and repeatedly lift up to 50 lbs. Must be able to use hands and vision to complete coordinated actions.
Work practices to be in accordance with Company Policies including, but not limited to attendance, confidentiality, safety and substance abuse.
The employee may be required to follow other job-related instructions and to perform other job related tasks as required, subject to applicable state and federal law.

Additional Qualifications
The following skills and qualifications are a plus but are not required for this position.

Mastercam Programming experience.
Experience working in an ISO-9001 or AS9100 Quality Environment.

Apply

Vacancy posted 2 days ago

Similar jobs that could be interesting for youBased on the CNC Set-up Machinist in York, PA vacancy

Job Shop Manual Machinist
...Job Description Manual Machinist (Manual Lathe / Manual Mill) - Hydraulic Repair Murphy... .... What You'll Be Doing Set upand operate manual engine lathes and... ...Job Is NOT For You If: Youonly want CNC button-pushing Youstruggle with measuring...
CNC
Hourly pay
Permanent employment
Full time
Murphy's Family Staffing
York, PA
5 days ago
Manual Machinist
...substrates. Job description: Bell-Mark Technologies is looking for a full-time manual mill machinist. Must have experience with set-up, print reading, gage set-up, some CNC experience is helpful. Competitive wages with benefits based on prior experience and education...
CNC
Full time
Shift work
Day shift
BELL-MARK Corp
Dover, PA
3 days ago
Machinist Journeyman, 2nd Shift
$45.31 per hour
....31 per hour (includes shift differential) We are seeking a CNC Machinist (Journeyman)to join our federal team at ourYork, PAlocation.We... ...Use precision measuring instruments, gauges, hand tools, tool setting equipment, appropriate material handling equipment. Required...
CNC
Hourly pay
Monday to Friday
Shift work
Afternoon shift
Johnson Controls Federal Systems
York, PA
3 days ago
Swiss Set-Up Operator
...Job Description Job Description Are you looking for a CNC Swiss Operator position with great benefits and pay? Looking for a challenge... ...machines. Operations consists of Putting tools in machine, setting tool positions, adjusting tool offsets, replacing inserts and...
CNC
The Manufacturers' Association
York, PA
24 days ago
Machinist 2nd and 3rd shift-$2,000 sign on bonus
...GENERAL JOB SUMMARY: To set-up, operate or program various types of machines (HAAS, FADAL... ...Will be required to set-up and operate CNC machining centers. Performs operations... ...supervisory responsibilities. Keyword: Machinist; CNC; Operator; Machine; Shelter Required...
CNC
Full time
Relocation package
Night shift
Afternoon shift
Kratos Defense
Dallastown, PA
more than 2 months ago
Material Coordinator, 2nd shift
$23.19 - $27.39 per hour
...7.39 + ($1.50 Shift Premium) \n \n BASIC FUNCTION \n \n Sets up and operates metal fabricating machines such as brakes, shears... ...situations. \n \n \n COMPUTER SKILLS \n \n Knowledge of CNC software and the ability to use a PC. The need for these skills...
CNC
Hourly pay
Shift work
Afternoon shift
Johnson Controls
York, PA
4 days ago
CNC Programmers - Manufacturing
...CNC Machine Operator Position Overview: Are you looking for a hands-on role where you can put your CNC skills to work in a friendly... ...operating CNC machines in a manufacturing or production setting. Familiarity with basic machine functions and tool changes. Experience...
CNC
Shift work
Nations Photo Lab
York, PA
1 day ago
Manual Machinist - 1st Shift
$30 - $32 per hour
...Manual Machinist - 1st Shift Pay: $30-32/hr. Shift: 7am-3pm (Mon-Fri) Job Summary: We are looking for a skilled Manual Engine... ...and stand for long periods. Key Responsibilities: Set up and operate manual engine lathes to fabricate hydraulic components...
Flexible hours
Shift work
Day shift
Cannonball Recruiting LLC
York, PA
1 day ago
CNC Programmers - Manufacturing
...Cnc Operator Consider joining the Pennex family as a CNC Operator at our York, PA location. The CNC Operator is responsible for CNC... ...Operates CNC equipment within the fabrication shop. Performs set-up of CNC equipment. Advises supervisor of any new tooling needed...
CNC
Flexible hours
Afternoon shift
Pennex
York, PA
5 days ago
CNC Machinist
$28 - $32 per hour
...Now Hiring CNC Machinist - Direct Hire Location: Birdsboro, PA Pay Rate: $28.00 - $32.00 per hour Blueprints. Microns... ..., specific to mill and lathe machining Proven experience setting up CNC machines Familiarity with CAD/CAM systems is...
CNC
Hourly pay
Immediate start
Shift work
Staffmark
York, PA
2 days ago
CNC Programmers, 1st and 2nd shifts
$20 - $25 per hour
...CNC Machine Operator Job Description Pay: $20-25/hr. Shifts: ~1st Shift Mon-Fri ~2nd Shift Mon-Fri or Mon-Thu... ...equivalent; technical training a plus. Key Responsibilities: Set up, operate, and monitor CNC machines (beam line, press brake,...
CNC
Weekly pay
Shift work
Day shift
Afternoon shift
Cannonball Recruiting LLC
York, PA
1 day ago
CNC Machinist 1st shift weekend shift
$24 - $28 per hour
...CNC Machinist (Weekends) Pay: ~$24-$28/hr. (Work 36, paid for 40) Shift: 5am-5pm, Friday-Sunday Required Skills / Experience... ...program G/M-code, including zero and reference points. Sets-up mills and/or lathes by selecting, installing, indicating...
CNC
Shift work
Weekend work
Day shift
Cannonball Recruiting LLC
York, PA
5 days ago
CNC Machine Operator
$23 per hour
...CNC Machine Operator Location: York, PA Job Type: Contract to Hire Shift: 1st and 2nd Shift available Rate: Starts at $... ...structural steel fabrication team on 2nd shift. In this role, you will set up and operate CNC equipment, including plasma cutters, beam...
CNC
Contract work
Shift work
Day shift
Afternoon shift
Qualdoc
York, PA
3 days ago
CNC Machinist: Temp-Perm, First Shift
$35 per hour
...CNC Set-Up Machinist The CNC Set-Up Machinist will take charge of setting up CNC Lathes and Mills within the Machine Shop. This role demands a high level of expertise in operating CNC Machines of various axis and styles. The machinist will be responsible for transforming...
CNC
Permanent employment
Contract work
Temporary work
Shift work
Day shift
Early shift
Aerotek
York, PA
1 day ago
Assembler I
$21 - $26 per hour
...check out \n \n Performs other duties as assigned. \n \n \n CNC Plasma Cutting Equipment and Quickmill Machining Center \n \n... .... Final offers are based on various factors, including skill set, experience, location, qualifications, and other job-related reasons...
CNC
Hourly pay
Worldwide
Flexible hours
GEA
York, PA
3 days ago
CNC Machinist
$20 - $30 per hour
...CNC Machinist/CNC Machine Operator Pay: $20-30/hr+ (depending on experience level) Description: ~ The CNC Machinist will play... ...in a team environment. US Citizen Job Duties: Set up and operate CNC machines to produce parts according to specifications...
CNC
Shift work
Cannonball Recruiting LLC
York, PA
4 days ago
CNC Machinist Journeyman (2nd shift)
$39.09 per hour
...Description Precision Custom Components (PCC) is seeking a talented CNC Machinist Journeyman (2nd shift) to join our team. This is an on-site... ...and horizontal CNC mills to machine parts to specification. Set up, run, and monitor CNC machining operations to meet...
CNC
Hourly pay
Work at office
Flexible hours
Shift work
Afternoon shift
Precision Custom Components, LLC
York, PA
21 days ago
CNC Machinist
...producers, and public and private utilities. Job Description Position Summary & Objective Machinist II is responsible for setting up, programming, operating, and maintaining CNC machines to produce high-precision components used in hydro turbines and complete turbine...
CNC
American Hydro Corporation
York, PA
1 day ago
CNC Machine Operator Navy Systems - EG
$34.08 per hour
...CNC Machine Operator Our Navy Systems team located in York, PA custom design, develop, manufactures, ships, installs, and maintains... ...that requires US Citizenship. Preferred ~ Experience with set-up and operation of CNC machines, preferably with Horizontal...
CNC
Hourly pay
Contract work
Relocation package
Monday to Friday
Shift work
Day shift
Afternoon shift
Johnson Controls International Plc
York, PA
5 days ago
CNC Programmers, 1st and 2nd shifts
$25 - $35 per hour
...Hiring Now: CNC Machinist - $25-$35/hr - York and Hanover, PA - Modern Shop, Steady Hours & Skilled Work Join a team where your machining... ...shift available - Start Date: ASAP Responsibilities - Set up and operate Mazak CNC lathes to produce precision components...
CNC
Permanent employment
Temporary work
Work at office
Local area
Immediate start
Weekend work
Day shift
Afternoon shift
PeopleShare Inc
York, PA
5 days ago
Field Service Engineer
...provided for cutting machines, equipment, and solutions beyond machines. The precision cutting technology rests on four main pillars:- Superior, industry-leading CNC cutting machines and eq Service Engineer, Field Service, Service Manager, Engineer, Field, Retail, Staffing...
CNC
Bradley-Morris
York, PA
2 days ago
CNC Operators
...the part when completed. Perform a visual quality inspection of the part. Notify the supervisor or lead of any issues # Operate all CNC Equipment (mills/lathes) # Complete necessary product quality inspections and documentation # Place completed parts in the...
CNC
Top Gun Staffing, Inc
York, PA
3 days ago
CNC Programmers - Manufacturing
$18.75 per hour
...Overview Consider joining the Pennex family as a CNC Operator at our York, PA location. The CNC Operator is responsible for CNC... ...Operates CNC equipment within the fabrication shop. Performs set-up of CNC equipment. Advises supervisor of any new tooling needed...
CNC
Daily paid
Local area
Flexible hours
Afternoon shift
Pennex Aluminum Co.
York, PA
3 days ago
CNC Programmers, 1st and 2nd shifts
$20 - $24 per hour
...CNC Machine Operator Pay: $20-24/hr. Shift: Mon-Fri (2:30pm to 11pm) - Must be able to train on 1st shift (6am start) Description: ~ The CNC Machine Operator will be running the the CNC burn table on the 2nd shift in a metal manufacturing environment...
CNC
Weekly pay
Shift work
Day shift
Afternoon shift
Cannonball Recruiting LLC
York, PA
4 days ago
Material Handler | 1st Shift | Weekly Pay | Manufacturing
$20 - $23 per hour
...CNC Machine Operator Pay: $20-23/hr. Shift: Mon-Fri (6am to 3:30pm) Description: ~ The CNC Machine Operator will be running the the CNC burn table on the 1st shift in a metal manufacturing environment. Requirements: Prior Blueprint...
CNC
Weekly pay
Shift work
Day shift
Cannonball Recruiting LLC
York, PA
2 days ago
Master Machinist
...Master Machinist As a Master Machinist at ASC - Columbia Plant, you will have the opportunity to work with your hands. You may be responsible... ...of parts Measuring and marking metal stock for machining Setting up machine tools such as drills, lathes, grinders, and milling...
Shift work
Night shift
Afternoon shift
ASC Engineered Solutions
Columbia, PA
3 days ago
CNC Machinist - 2nd Shift
$25 - $35 per hour
...CNC Machinist 2nd Shift Pay: $25-35/hr. (Depending on experience level and/or Journeyman papers) Shift: Monday-Friday (3pm to 11pm); voluntary OT may be available Qualifications: Candidate must have a high school diploma or GED Qualified applicants...
CNC
Immediate start
Monday to Friday
Shift work
Afternoon shift
Cannonball Recruiting LLC
West Manchester, PA
4 days ago
Manufacturing Engineer
.... This role is ideal for an engineer with hands‑on exposure to CNC machining, metalworking, or manufacturing environments who is ready... .... The Manufacturing Engineer will collaborate closely with machinists, quality, CNC programming, project management and engineering to...
CNC
Work at office
York Precision Machining and Hydraulics
York, PA
24 days ago
CNC Programmers - Manufacturing
$28 - $30 per hour
CNC Machinist Programmer Pay rate: Starts at $28.00-30.00per hour and up based on experience Shift:1st shift 6:45am-3:25pm Red Lion... ..., surface, and pedestal grinders, and various hand tools. Set controls to regulate machining factors such as speed, feed, coolant...
CNC
Shift work
Day shift
inSync Staffing
Red Lion, PA
1 day ago
CNC Machinist
$38.22 - $40.72 per hour
...CNC Machinist Location: Columbia, PA Schedule: First Shift | Second Shift | Weekend Shift Pay: $38.22/hr. – $40.72/hr. Position... ...engineering drawings. Configure machines by entering CNC programs, setting tool offsets, and zero points. Execute tool changes,...
CNC
Permanent employment
Full time
Temporary work
Shift work
Weekend work
Day shift
Afternoon shift
Staffmark
Columbia, PA
5 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to CNC Set-up Machinist. Be the first to apply!