CNC Machinist III
$45 - $55 per hourJohnson Service Group (IL)
Job Description Pay Rate: $45-$55/hr
1st shift As a Machinist III, you will independently set up and operate advanced 3-, 4-, and 5-axis CNC machining centers to manufacture complex, mission-critical aerospace hardware. You will own machining execution from setup through dimensional verification, frequently working on one-of-one and low-volume components manufactured from difficult and high-value materials. This position requires advanced machining judgment, strong troubleshooting capabilities, and the ability to work collaboratively with Programming, Engineering, and Quality. The Machinist III reports to the Machine Shop Foreman and provides technical guidance to less-experienced machinists.
Responsibilities
This position requires access to information and/or hardware subject to U.S. export-control regulations, including the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). Candidates must qualify as a U.S. person as defined by applicable U.S. export-control regulations. JSG offers medical, dental, vision, life insurance options, short-term disability, 401(k), weekly pay, and more. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law. #D500
1st shift As a Machinist III, you will independently set up and operate advanced 3-, 4-, and 5-axis CNC machining centers to manufacture complex, mission-critical aerospace hardware. You will own machining execution from setup through dimensional verification, frequently working on one-of-one and low-volume components manufactured from difficult and high-value materials. This position requires advanced machining judgment, strong troubleshooting capabilities, and the ability to work collaboratively with Programming, Engineering, and Quality. The Machinist III reports to the Machine Shop Foreman and provides technical guidance to less-experienced machinists.
Responsibilities
- Independently set up and operate complex 3-, 4-, and 5-axis CNC machining centers.
- Prove out setups for new or unproven components in collaboration with Programming and Engineering.
- Machine one-of-one, prototype, and low-volume flight hardware using Inconel, titanium, stainless steel, copper, and other exotic alloys.
- Perform conversational programming and controller-level G-code and M-code edits using Fanuc and/or Siemens controls.
- Install and qualify fixtures, workholding, cutting tools, probes, machine datums, and related setup components.
- Interpret engineering drawings, models, setup documentation, and Geometric Dimensioning and Tolerancing (GD&T) requirements.
- Perform first-piece and in-process dimensional verification while monitoring tool wear, machining conditions, and process stability.
- Independently troubleshoot machining, tooling, setup, and dimensional issues in partnership with Programming, Engineering, and Quality.
- Exercise stop-work authority when conditions may place personnel, equipment, or hardware at risk.
- Provide technical guidance and mentorship to less-experienced machinists.
- High school diploma or equivalent.
- 5+ years of CNC machining experience in a precision manufacturing environment.
- Demonstrated ability to independently set up and operate complex 3-, 4-, and 5-axis CNC machining centers with minimal supervision.
- Experience machining one-of-one, prototype, or low-volume, high-value components.
- Experience machining Inconel, titanium, stainless steel, copper, and/or other exotic alloys.
- Conversational programming experience using Fanuc and/or Siemens controls.
- Basic CAM experience using Mastercam, ESPRIT, CATIA, or comparable software.
- Experience working within an AS9100 or equivalent quality management system.
- Strong blueprint-reading skills and practical knowledge of GD&T.
- Strong knowledge of cutting tools, workholding, fixturing, probing, feeds, and speeds.
- Proficiency using precision measuring and inspection equipment.
- Ability to exercise sound judgment and maintain composure while machining one-of-one and high-value aerospace hardware.
- Strong verbal and written communication skills.
- Experience with large-format 5-axis machining.
- Experience machining additively manufactured components.
- Previous experience mentoring or providing technical guidance to less-experienced machinists.
- Advanced experience troubleshooting complex machining, tooling, dimensional, and process-related issues.
This position requires access to information and/or hardware subject to U.S. export-control regulations, including the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). Candidates must qualify as a U.S. person as defined by applicable U.S. export-control regulations. JSG offers medical, dental, vision, life insurance options, short-term disability, 401(k), weekly pay, and more. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law. #D500
Vacancy posted 5 days ago
Similar jobs that could be interesting for youBased on the CNC Machinist III in Arlington, WA vacancy
- ...Aerotek - JobID: JP-005853376 [Production Operator / Machinist] As a CNC Machine Operator at Aerotek, you'll: Operate machinery; Perform maintenance and monitor the output of machinery; Visually inspect production for flaw; Sort, organize, and prepare output for shipment...SuggestedImmediate start
- ...develop and optimize complex multi-axis machining work, mentor machinists, ensure alignment with production priorities, and help maintain... ...Develops, proves out, and optimizes Computer Numerical Control (CNC) programs for 3-, 4-, and 5-axis machining using Mastercam....SuggestedPermanent employmentFor contractorsWork experience placementMonday to FridayDay shift
$25 - $45 per hour
...Job Description Job Description CNC Machinists – Arlington, WA Pay: $25–$45/hr. | 3 or 4 Day Work Week | Openings on All Shifts Newell Corporation is growing and we're hiring CNC Machinists to help drive our next phase of growth. With newly expanded manufacturing...SuggestedCurrently hiringLocal areaAll shiftsShift workWeekend workDay shiftAfternoon shift3 days per week$40 - $50 per hour
...Job Title: Machinist III Job Description The Machinist III independently sets up and operates advanced 3-, 4-, and 5-axis CNC machining centers to produce complex, mission-critical aerospace hardware. This role owns the machining process from initial setup through...SuggestedWeekly payContract workTemporary workWork at officeLocal area- ...looking for a career that offers high pay and outstanding benefits, we have a job opportunity for you! The successful candidate for CNC Programmer must have 2 years of experience developing programs and strategy to design data and produce machined parts from mills and...SuggestedPermanent employment
$45 - $65 per hour
...Pay Rate: $45-$65/hr 1st shift A CNC Programmer, you develop, implement, and support machining processes for advanced precision... ...machining strategies, validate processes, and collaborate closely with machinists, engineering, and quality teams. Your work directly supports...Weekly payPermanent employmentTemporary workDay shift- ...engineers, production personnel, programmers, or others to resolve machining or assembly problems Trains and assists lower-level machinists Other duties may be assigned Education and Experience: To perform this job successfully, an individual must be able to...Permanent employment
$23.75 - $27.75 per hour
...structures, wing components, engine pylons, and other critical aerospace parts. We're hiring dependable Machine Operators with machining, CNC, manufacturing, or production experience who are looking for long-term career growth. What You'll Do Operate CNC machines,...Weekly payFull timeContract workTemporary workImmediate startShift workNight shiftWeekend workDay shift$40 - $48 per hour
...meet precise dimensional requirements. You partner closely with machinists and quality personnel to inspect first‑article and production... ...Preferred Qualifications Certification in Computer Numerical Control (CNC) machining technology, equivalent trade school or military...Hourly payTemporary workFor contractorsLocal areaFlexible hoursDay shift$40 - $48 per hour
...develop effective inspection approaches. Collaborates with machinists to verify first article and production part compliance. Performs... ...Qualifications Certification in Computer Numerical Control (CNC) machining technology, equivalent trade school or military...Hourly payPermanent employmentTemporary workFor contractorsLocal areaFlexible hours- ...primarily plastics and rubbers. Operate, monitor, and perform routine setup adjustments on semi-automated manufacturing equipment, including CNC production lathes. Make routine adjustments and tooling changes to maintain product quality and process efficiency. Conduct...Full time
$25 - $32 per hour
...re hiring a Quality Inspector to help drive our next phase of growth. With newly expanded manufacturing operations, including doubled CNC machining capacity and 20,000 additional square feet of production space, there's never been a better time to join our Arlington, WA...Local areaImmediate start$23 - $30 per hour
...Aerospace Deburr Technician to help drive our next phase of growth. With newly expanded manufacturing operations, including doubled CNC machining capacity and 20,000 additional square feet of production space, there's never been a better time to join our Arlington, WA...Local area- Repair And Tool TechnicianRepair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained. Technicians...
- Mobile Equipment OperatorStella-Jones is a leading manufacturer of essential infrastructure products focused on serving utilities and railroads, as well as supplying big box home improvement stores across North America. Headquartered in Montreal, Canada and publicly traded...
- ...Initiates purchase order for parts and machines Repairs electrical equipment Troubleshoot and diagnose electrical systems, drives and CNC equipment. The ideal candidate will have 1-2 years of experience and have general knowledge of mechanical devices. Strong...Permanent employmentImmediate start
$17.13 - $25.2 per hour
Job Description Job Description PAPE’ MATERIAL HANDLING, INC. – ARLINGTON, WA YARD / UTILITY PERSON: Do you enjoy a variety of job duties? Are you mechanically inclined? Do you want the opportunity to grow in your career? Pape Material Handling, the premier ...Temporary workFlexible hours$27 - $30 per hour
Company Logo Overview Suncoast Post-Tension Ltd, a Keller Company, is an established post tension and rebar manufacturing company that has been in business for over 30 years. We supply construction related materials to builders from one of our eight manufacturing...Contract workWork experience placement- Electrical Engineering Technician We are looking for an experienced Electrical Engineering Technician with strong electronics fundamentals, excellent troubleshooting ability, and experience working with test equipment and electronic hardware to support electronics production...Permanent employmentFlexible hours
$23 - $28 per hour
Aerospace Manufacturing TechnicianArlington, WA | Temp-to-Hire | $23.00-$28.00/hr + Shift DifferentialsAre you mechanically inclined with experience in aerospace or manufacturing? We're hiring Aerospace Manufacturing Technicians for multiple temp-to-hire openings with ...Hourly payTemporary workLocal areaShift workNight shiftWeekday work- Interpret Construction PlansFraming carpenters read blueprints, sketches, and drawings for carpentry projects of all types.Prepare Building MaterialsFraming carpenters cut, shape, and install building materials to build frames for buildings and structures.Make RepairsFraming...
- ...repair and replace VAV box heaters, motors, and controls . Set-up of various types of production equipment (including: DMS & Thermwood CNC machine, Oil heaters, Dust collection system, Presses, etc.) Perform equipment and building maintenance PM’s. Perform business...Work at office
- A Day in the Life: As a Baker, no one day is ever the same. To truly be successful in the position, you will be passionate about baking breads, cookies, and pastries, as well as producing fancy desserts and decorating cakes. Our Bakers also have the
$17.13 - $22.65 per hour
Company Description Pay Rates Starting between: $17.13 - $22.65 / hour Are you passionate about team building, customer service, and meeting new people? Pilot Company offers a dynamic environment where no two days are the same. Team members have the opportunity to...Weekly payFull timeLocal areaFlexible hoursNight shiftWeekend workDay shift$168.1k - $227.4k
Amazon Leo is Amazon’s low Earth orbit satellite network. Our mission is to deliver fast, reliable internet connectivity to customers beyond the reach of existing networks. From individual households to schools, hospitals, businesses, and government agencies, Amazon Leo...Permanent employmentInternshipLocal areaFlexible hours$100k - $200k
Job Description Job Description Job Summary: Are you an experienced HVAC Service Technician who takes pride in delivering exceptional customer experiences and enjoys helping homeowners make informed decisions about their comfort systems? If so, we want you on our...Local areaRelocation package$32.5 per hour
Maintenance Technician II Mechanical & RoboticsLocation: Arlington, WAPay Rate: $32.50/hourPosition Type: Contract-to-HireShift: 1st Shift or 3rd Shift (Candidates must be flexible to work either shift)Position OverviewWe're seeking a skilled Maintenance Technician II ...Permanent employmentContract workTemporary workFlexible hoursNight shiftDay shift$32.5 per hour
Job Description Job Description Maintenance Technician II Mechanical & Robotics Location: Arlington, WA Pay Rate: $32.50/hour Position Type: Contract-to-Hire Shift: 1st Shift or 3rd Shift (Candidates must be flexible to work either shift Position...Weekly payPermanent employmentContract workTemporary workFlexible hoursShift workNight shiftDay shift$35 - $45 per hour
...parts for geometry acceptance and weld conformance; diagnose defects and recommend corrective actionsOperate manufacturing equipment (CNC mills, water jets, bandsaws) and precision tools (torque wrenches, micrometers, calipers)Operate cranes, forklifts, and other heavy...Permanent employmentWeekend workAfternoon shift- SeaCast, Inc. is seeking an experienced, safety-focused, and highly motivated Senior Vacuum Melt Operator / Supervisor to lead and optimize our precision investment casting operations. This role combines hands-on vacuum melt and casting responsibilities with technical...Shift work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to CNC Machinist III. Be the first to apply!




