Stringless Controls Technician
Bettis Companies
Job Description
Job Description
The Stringless Controls Technician position will begin in Topeka, KS, and then require extended travel and work throughout the Midwest (e.g. Oklahoma, Kansas, Arkansas, Nebraska).
Daily overtime after 8 hours Per Diem Benefits Primary Function:
The Stringless Controls Technician position is responsible for setting stringless controls equipment to effectively communicate with paving equipment and other machinery. This position will work on highway construction projects and may operate a variety of hand and power tools, air hammers, and measuring equipment. Typical Duties:
Independently setting stringline and concrete forms.
Setting up stringless controls equipment to effectively communicate with machinery.
May lift, carry and hold materials, tools and supplies.
May assist in the placement, moving and dismantling of signs, barricades, cones and other traffic control devices.
May perform other duties as assigned.
Must be able to follow directions.
Must be able work outdoors in extreme temperatures, both hot and cold.
Must be able to lift and carry up to 75 lbs.
Must be able to climb, stoop, bend, and squat as required for various duties.
Must adhere to safety requirements as outline in the Employee Handbook.
Must be able to work in a team environment and assist co-workers and supervisors with other duties as required.
Working Conditions:
Move joint baskets weighing up to 70 lbs. from knee to chest height, place basket on ground, and secure by hammering retain clips into the ground.
Insert L-bar 2 ft. into concrete slab every 2 ft, roughly 1,500 daily.
Shovel excess concrete from paved surfaces and carry 75 lbs. up to 150 ft.
Walk along paver on hard surface that can be periodically uneven for 10-14 hours per day.
Clean concrete and other materials from pavers and equipment.
Pick up, carry, and set large signs and traffic control devices.
Required Qualifications: Must be at least 18 years of age.
Must be able to complete a pre-employment drug screen with a "Negative" result.
Must be able to complete a post-offer physical with a "Capable" result.
Koss Construction Company is an Equal Opportunity Employer and Drug Free Workplace. Women, Minorities, and Veterans are encouraged to apply. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.
- DescriptionJOB TITLE: Power Plant Controls Engineer - Generation Development REQUISITION: DEV0005DEPARTMENT: Generation DevelopmentLOCATION: Topeka, KS / Kansas City, MO / Wichita, KSPAY RANGE: Engineer II - $66,300 - $82,900 Staff Engineer: $90,500 - $113,100 Sr Engineer...SuggestedContract workFor contractorsWork at officeNight shiftWeekend work
- ...a full-time job (not a contract position). Principal Duties and Responsibilities Maintain and troubleshoot Programmable Logic Controllers (PLCs) including Allen Bradley ControlLogix and GuardLogix, Wonderware based Human Machine Interfaces (HMI) or Panelview. Maintain...SuggestedFull timeContract workFlexible hoursShift work
$62k - $79k
...comprised primarily of Fortune 500 companies and large system integrators. Job Description Athenpollo Inc is looking for a Controls Technician to support a world-class manufacturing company. This is a full-time position in Topeka, KS. Security, Satisfaction, flexible...SuggestedPermanent employmentFull timeRelocationFlexible hours$85k - $120k
...manufacturing combined with category-leading brands in compression, controls, software and monitoring solutions result in next-generation... ...today! Job Description: If you are a Field Service Technician professional looking for an opportunity to?grow, Copeland has...SuggestedFull timeTemporary workFor contractorsFor subcontractorStart working todayLocal areaRemote workFlexible hoursWeekend workAfternoon shift$42.81k - $43.95k
...Summary & Responsibilities: Position Summary: This Electronic Technician Senior position is located in Topeka, at the Planning Shop, and... ...and validate data, and assist with coordination with traffic control and utility companies. The Electronic Technician Senior will also...SuggestedHourly payPermanent employmentFull timeTemporary workPart timeWork at officeMonday to Friday- ...hand tools; procedures for training, supply, maintenance data collection, be familiar with heavy equipment, production, and materiel control; facility requirements; and support equipment. Desirable experience with US Air Force technical data, including block, schematic,...
- ...HVAC Service Technician Central Mechanical Construction is seeking an experienced, full-time HVAC Service Technician to perform preventative... ...Verifying proper function of all operational and safety controls Diagnose and repair airflow and ducting issues. Perform...Full timeWork at officeFlexible hours
- ...mixers, and scales; and kitchen exhaust, ventilation, and pollution control systems. ITW FEG has the largest service network in this industry to support our global customers, with highly specialized technicians and best-in‑class supply chain procedures. The company was...Contract workWork experience placementWork at officeLocal areaNight shiftAfternoon shiftEarly shift
- ...Position Summary: The Construction Materials Field Technician (CMT) will be responsible for conducting on-site testing of concrete... ...assessment duties under general supervision and/or from detailed controlled procedures. Operates testing equipment and conducts testing...For contractorsWork at office
- ...aligned with our clients' goals.As a Commercial Hvac Service Technician, you will be responsible for servicing, troubleshooting, and cleaning... ...systems, package units, make up air and exhaust systems, controls). You will also be responsible for new installations including...Full timeContract workApprenticeshipLocal areaWork visa
- ...other integrated technology solutions.Position SummaryThe Service Technician – Fire Alarm is responsible for inspecting, troubleshooting,... ...fire alarm system components as needed.Work with fire alarm control panels, initiating devices, notification appliances, power supplies...Local area
$46 per hour
...customers. Perform duties in Power Delivery & Electrification - Execute work in Power Delivery, Medium & Low Voltage Electrification, and Control Systems. Champion safety and compliance - Uphold ABB's safety culture, lead HSE practices, report hazards, and ensure proper PPE...Hourly payTemporary workFor subcontractorLive inMonday to Friday$20 - $30 per hour
...tasks needed to keep the equipment operational. The maintenance technician will work closely with operational and management personnel to... ...of maintenance functions. Detailed knowledge of Electrical, Controls, is desired, PLCs and/or HVAC troubleshooting is a plus. Ability...Hourly paySummer work- ...spreadsheets, database management, etc.Demonstrated proficiency with work order management software, inventory management software, fuel control management software, etc.Demonstrated ability to supervise, direct, and engage personnel in carrying out multiple work assignments....Work at officeLocal area
$1,000 - $3,000 per month
...the candidate has been assessed and the level of Maintenance Technician is determined for the candidate to be hired into) Benefits and... ...recording work performed and work needed. 13. Maintain control of MRO inventory. 14. Perform additional duties as assigned...Full timeRelocation packageFlexible hoursShift workWeekend workDay shift$20 - $30 per hour
...Maintenance Technician***POSITION LOCATED IN EMPORIA***This position is responsible for performing daily preventive maintenance tasks... ...knowledge of maintenance functions. Detailed knowledge of Electrical, Controls, is desired, PLCs and/or HVAC troubleshooting is a plus....Hourly paySummer work$20 per hour
...Mobile Service TechnicianThe Mobile Service Technician is responsible for maintaining the fleet for clients and to handle service calls... ...inspections are performed and documented as assigned.Manage inventory control on the service truck and for keeping the vehicle properly...- ...drive everything we do. Summary/Objective An Automotive Technician will perform repair work and maintenance for cars, trucks, and... ...industry standards for quality and safety. Perform quality control checks and test-drive vehicles to verify repairs and diagnose...Full timeApprenticeshipLocal areaImmediate startFlexible hoursNight shiftWeekend work
- ...assigned.Applicants should possess the following qualifications:Industrial electrician (480V systems to include motors and controls)Process controls technician (3-15 psi and 4-20 mA controls)Experience with variable speed drives, instrumentation, and control systemsPLC...Flexible hoursShift workNight shiftRotating shift3 days per week
- ...decline to our use of Google Analytics below.Electrical Instrument Technician page is loaded## Electrical Instrument Technicianremote type:... ..., and installation of electrical instrumentation, and control devices or systems of IFF Danisco USA Inc. As well as providing...Shift work
$20 - $27 per hour
...Field Service Technician | No Experience Needed – We'll Train You!At Culligan Water, we deliver better water and better lives. We're looking for motivated individuals who want more than a job — they want a career. If you bring the right attitude, curiosity, and drive,...Hourly payImmediate start- ...can decrease the property’s energy consumption. The Mobile Technician also effortlessly performs routine building maintenance,... ...HVAC systems (including, pumps, motors, air handlers, automation/controls systems, and associated electrical systems) using industry standard...Daily paidFor contractorsWork at office
- ...your career.**Omya is seeking a skilled **Mechanical/Electrical Technician** to troubleshoot, repair, and maintain critical plant... ...preventive maintenance.* Support process instrumentation, drives, and control systems.* Document maintenance activities and maintain...WorldwideNight shift
$20.49 - $30.21 per hour
...mechanical systems function adequately to minimize downtime. The technician must adhere to SOPs, cGMPs, and plant quality, safety, and... ...systems, vision systems, barcode verification equipment, and line control management. Troubleshoot and repair electrical, mechanical,...Hourly pay- ...equipment history files as work is performed on equipment. Responsible for noting on Maintenance bluelines, electrical wiring diagrams, control schematics or P & ID drawings, any changes, modifications made to the process systems. Maintain accurate spare parts usage log....Rotating shift
- ...engines, turbine engines, automatic and non automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems. Make repairs and...
$10k
...quality repairs the first time by conducting test drives; adjusting controls and systems as required Ensures that customer vehicles are... ...available Tool allowance Safety glasses/shoes reimbursement Technician onboarding program Mentorship program - support for new technicians...Shift work- ...Mechanic. The role of the Diesel Service Journeyman / Mechanic performs all functions of a fully qualified heavy-duty truck repair Technician under minimal supervision. Performs skilled and complicated mechanical work on heavy-duty truck equipment and related...Temporary workApprenticeshipFlexible hours
- Responsibilities Follow Safety and Security Procedures when working on ATMs. You will learn this on Day 1. Complete NCR Atleos specific trainings and certifications on our training website. Diagnose problems based on the error logs from the ATM and information provided ...
- ...maintenance services on-site or in our well-equipped shop. Berry Tractor & Equipment is looking for an experienced Field Service Diesel Technician to join our amazing team of technicians! If you are a confident, experienced heavy equipment mechanic, and have a clean driving...Temporary workLocal areaMonday to FridayFlexible hoursDay shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Stringless Controls Technician. Be the first to apply!
- data entry technician Topeka, KS
- configuration technician Topeka, KS
- mold technician Topeka, KS
- data center operations technician Topeka, KS
- project technician Topeka, KS
- accessioning technician Topeka, KS
- safety technician Topeka, KS
- er technician Topeka, KS
- control systems technician Topeka, KS
- data center technician Topeka, KS



