CNC Swiss Operator
Smith & Richardson Manufacturing Co
Job Description
Job Description
Job Title:
Machine Operator
Reports to:
Production Manager
General Description:
General operation of the production machines such as SWISS and CNC Lathe when necessary. Responsible for first inspection and inspection during production.
Responsibilities: (50% Operating, 40% Inspecting, 10% Other)
- Use micrometers, calipers, pin gages, comparator and various other inspection equipment appropriately
- Turn on machine. Inspect for obvious problems. Inspect first part off at startup of machine.
- Check for Proper Material and Size before loading into Machine.
- Load Material into vises as required, making sure all chips have been cleaned out of clamping areas before tightly securing vise jaws
- Operate machine watching and listening for possible problems. (I.e. Loud noises, unusual sounds, broken or worn tooling etc.)
- Ability to understand and modify tool offsets
- Inspect and replace broken/worn tooling. Ability to touch off newly installed tooling
- Ability to meet or exceed production rates stated on work order
- Read, understand information in workmanship standards and part drawings
- Fill out appropriate sections of work order
- Perform and document S&R inspection procedures when appropriate (SPC charts, work orders, move tickets)
- Identify nonconforming product or material
- Wash tools and return to storage area
- Complete the preventative maintenance check list
- Know and follow safety standards
- Move parts to next operation
- Remove scrap
- Help with set-up operations
- Other duties as required
Physical and Visual Activities:
- Standing, walking, sitting, lifting, carrying, pushing, pulling, balancing, stooping, kneeling, crouching, crawling, reaching, handling, fingering, feeling, talking, hearing, visual acuity-far/near depth perception, field of vision and accommodation.
Physical Demands:
- Lift up to 75 pounds
Job Qualification Requirements:
- Knowledge
- High school graduate or equivalent; reading, basic math, blueprint reading
- Experience
- 1-2 year machine operating experience. Swiss CNC Experience Preferred, but CNC Lathe experience is also a plus.
- If no Experience then Training Period: 3 months to a year
- Information/Directions
- Written and verbal work instructions, workmanship standards book (engineer drawings), quality control documentation (work orders, move tickets)
Vacancy posted a month ago
Similar jobs that could be interesting for youBased on the CNC Swiss Operator in Geneva, IL vacancy
$36 - $50 per hour
...Description PERMANENT, FULL-TIME OPENINGS - HIRING 2 EXPERIENCED CNC SWISS PROGRAMMER / SETUP MACHINISTS Quantum Precision is... ...or seasonal roles. Join a growing precision manufacturing operation with a steady long-term workload, full benefits, and consistent...SuggestedHourly payPermanent employmentFull timeContract workSeasonal work- ...Job Description Job Description General Description: Set-up, operate, and trouble shoot a variety of machines including CNC, VMC, and SWISS machines. Responsible for first inspection and inspection during production, and responsible for updating and maintaining...SuggestedAfternoon shift
- ...Job Description Job Description FT Swiss CNC Machine Set-up Must know how to set-up Star Swiss CNC Machines Make Programming adjustments Check Parts using Measuring equipment. Set Tooling Benefits included - 401k, Health Insurance, Vacation Time, etc...Suggested
- ...CNC Swiss Programmer/Setup MachinistWe are working with a client company in the greater Chicago Metro region who is seeking a CNC Swiss... ...making necessary programming adjustments on CNC Swiss machines.Operate CNC Swiss machines to produce precision machined metal and plastic...Suggested
- ...CNC Swiss Programmer/Setup Machinist We are working with a client company in the greater Chicago Metro region who is seeking a CNC Swiss... ...necessary programming adjustments on CNC Swiss machines. Operate CNC Swiss machines to produce precision machined metal and plastic...Suggested
- ...Aegis is seeking a Swiss CNC Machinist to join our client's organization. This role is located in Glendale Heights, IL and is a 6 month... ...High school diploma or GED ~5+ years of hands-on experience operating CNC Swiss (sliding headstock) machines ~ Direct experience...Temporary workApprenticeship
$24 per hour
...JOB SUMMARY Prince Industries is looking for CNC Operators in our Turning / Swiss Department. We have openings on both first and second shifts. First Shift: 5:45am - 2:15pm, Monday through Friday. ESSENTIAL DUTIES AND RESPONSIBILITIES Operates production...Permanent employmentFull timeTemporary workApprenticeshipImmediate startRelocation packageMonday to FridayShift workDay shift- ...CNC Machine OperatorSouth Elgin, Illinois, United StatesWe are hiring a CNC Machine Operator to run Swiss (Citizen) and/or Eurotech multi-axis lathes in a precision machining environment. This role focuses on safe operation, quality parts, and meeting production goals....
$27 - $35 per hour
...Job Description Job Description Machinist I – Production CNC Set-up and Operator (Direct Hire | 1st Shift | On-site) If you take pride in dialing in CNC setups and turning complex prints into quality parts, this role puts you at the center of production—supporting...Hourly payTemporary workFlexible hoursDay shift- ...Title: CNC Machinist Location: West Chicago, IL Duration: 6+ months (Possible extension/conversion based on performance and budget)... ...supports the Specialty Tooling Department by safely setting up, operating, and supporting CNC and manual milling equipment used to manufacture...Hourly pay
- ...CNC ProgrammerSix month assignment with the possibility of extension based on needs Shift: Monday to Friday 7:00 am to 3:30 pmPosition... ...for creating accurate CNC programs, supporting machining operations, reviewing design data, selecting appropriate tooling, and helping...Monday to FridayShift work
$18 - $20 per hour
...30 minutes Overtime: Always optional. Job Summary Tomenson Machine Works is hiring dependable, detail-oriented CNC Machine Operators for our second-shift manufacturing team. In this position, you will operate CNC machining centers producing precision aluminum...Hourly payPermanent employmentFull timeMonday to FridayShift workAfternoon shift- Job Description Job Description Description: Run and inspect parts per blueprints and inspection sheets Maintain tooling in machine by following setup sheets. Monitor tool life and make tool changes and offsets as needed. Update work instructions. Clean...
- ...Job Description Job Description Manufacturing CNC Setup Operator Location: Wood Dale, IL 60191 Job Type: Full-Time – 1st shift... ...Machine Setup and Calibration Prepare CNC machines (such as Swiss lathes, Mills, and EDMs) for production by setting up tooling...Full timeShift workDay shift
- ...CNC Lathe Machine OperatorLocation: Batavia, IL Shift: 6:00 AM to 2:30 PM Pay: 23.00 per hourJob Overview: Operate CNC Lathe machines and a computer console to complete assigned work. Complex machine setups are handled by others. You will check parts using measurement...Temporary workShift work
$25 - $30 per hour
...Job Description Job Description CNC Lathe / Set Up / Operator Employment Type: Direct HIre Location: Batavia, IL Work Schedule: Onsite, Monday through Friday Pay Range: $25.00 - $30.00 per hour Build a long-term machining career with a team that will...Hourly payFull timeTemporary workMonday to FridayFlexible hours$32 - $40 per hour
...What Youll Do Set up and operate Citizen CNC Swiss Machines Interpret complex prints job travelers and setup sheets Select preset and install cutting tools; adjust feeds speeds and offsets as needed Perform precision machining to close and interrelated tolerances...Full timeShift workNight shift- ...Aerotek - - Responsibilities: Set up and operate Swiss CNC machinery to meet production requirements; Read blueprints and schematics to configure machines; Perform machine changeovers at the controller; Monitor machine operations and adjust settings for quality and efficiency...
- ...Kelly Services, Inc. - - Responsibilities: Set up and operate CNC milling machines, manual mills, and lathes; Read and interpret drawings and 3D models; Apply Mastercam and G-code to machining programs; Inspect parts with micrometers and calipers to verify quality; Adjust...
- ...CNC SetupSeeking an experienced CNC Setup Person to set up, operate, troubleshoot, and optimize a variety of CNC machining and fabrication equipment used in the production of precision components. This position works closely with engineering and production teams to ensure...
- ...Vertical Cnc Machinist (Swiss Machines)We are working with a client company seeking a Vertical CNC Machinist (Swiss Machines) for their company... ...at ****@*****.*** Responsibilities:Setup and Operation: Set up, calibrate, and operate Vertical Machining Centers...
$30 - $40 per hour
...Job Description Job Description Apply CNC Programmer Elmhurst, Illinois - Posted on November 18, 2026 Published By Matthew Norton CNC Swiss Programmer needed in Elmhurst, IL! Direct Hire! Our client is looking for an experienced CNC Swiss Programmer...Shift workNight shiftWeekend work- ...Job Description Job Description Position Summary The CNC Machine Set-Up II is responsible for setting up, operating, maintaining, troubleshooting, and optimizing CNC equipment to support safe, efficient, and high-quality manufacturing operations . This position...Shift workWeekend work
$18 - $22 per hour
...Job Description We are currently hiring an experienced OD Machine Operator for a precision grinding company in Addison, IL. The ideal candidate will have experience operating manual and/or CNC OD grinding machines , be comfortable reading blueprints, and have strong...Hourly payWeekly payTemporary workCurrently hiringMonday to FridayWeekend work- ...Job Description Job Description About the Role We are seeking a skilled Flatbed CNC Operator to produce high-quality acoustic panels and architectural components using PET felt and related composites. You'll be responsible for setup, programming, operation, quality...Afternoon shift
- ...Job Description Job Description General Description: General operation of the production machines such as SWISS or CNC Multi-Turret Lathes when necessary. Responsible for first inspection and inspection during production. **2nd Shift wage premium** Responsibilities...Afternoon shift
- ...Machine OperatorAs a Machine Operator you will run repeat proven parts with low to intermediate complexity. You will receive direction and will be overseen by the area Lead, Supervisor, or qualified area Machinist.Job ResponsibilitiesResponsible for utilizing shop paper...
- ...ask for an accommodation or an alternative application process. CNC Machinist 125 Human Resources Full Time Technical West Chicago,... ...industries. As we continue to grow, we remain dedicated to operational excellence, teamwork, and creating meaningful career opportunities...Full timeWork experience placement
- ...Job Description Job Description Looking for CNC Operators for 2nd Shift for our client in Elgin that works with medical components Hours: 3pm-11:30pm *must be able to work overtime if needed and some weekends* SUMMARY: Fabricates precision parts from metal...Weekend workAfternoon shift
$35.71 per hour
...CNC Operator/ProgrammerSturtevant Richmont, a division of Snap-on Incorporated, is seeking a CNC Operator/Programmer to set up and operate one or more computer numeric controlled machines, Puma Lathes, and VF CNC mills. The pay rate is $35.71 per hour.Responsibilities...Hourly pay
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to CNC Swiss Operator. Be the first to apply!


