Ironworker(maintenance)
Central Gulf Industrial Alliance
SUMMARY Helpers (includes helpers 0 months- helper 42 months) - Preferred minimum of 6 months documented field experience in chosen craft discipline. Must have the ability to read and interpret instructions and documentation. The level and degree of job responsibilities and requirements vary depending on months of experience and assigned job step. Assembles, analyzes for defects, and repairs boilers, tanks, vats and pressure vessels, boiler auxiliaries and ancillaries according to blueprints specifications, using power tools and hand tools. RESPONSIBILITIES - Locates and marks reference points for columns or plates on foundation, sing master straight edge, squares, transit and measuring tape and applying knowledge of geometry.
- Attaches rigging or signals crane operator to lift components to specified position.
- Aligns structures or plates sections to assemble boiler frame, tanks or vats sing plumb bobs, levels, wedges, dogs or turnbuckles.
- Hammers, flame-cuts, files grinds irregular edges of sections or structural parts to facilitate fitting edges together.
- Bolts or arc-welds structures and sections together.
- Positions drums and headers into supports or bolts or welds supports to frame.
- Aligns water tubes, connects and expands ends to drums and headers using tube expander.
- Bolts or welds casing sections, uptakes, stacks, baffles and such fabricated parts as chutes, air heaters, fan stands, feeding tube, cat walks, ladders, coal hoppers and safety hatch to frame using wrenches
- Performs minor maintenance or cleaning activities with tools and equipment.
- Installs manholes, handholds, valves, gauges and feed water connection in drums to complete assembly of water tube boilers.
- Signals crane operator in lifting parts to specific positions.
- Assists in testing assembled vessels by pumping water or gas under specified pressure into vessels and observing instruments for evidence of leakage.
- Repairs boilers or tanks in field by unbolting or flame cutting defective sections or tubes, straightening plates using torch or jacks, installing new tubes, fitting and welding new sections and replacing worn lugs on bolts.
- May fasten and caulk sections of vessels, using pneumatic fasteners and caulking hammers.
- May line firebox with refractory brick and blocks.
- May fabricate parts such as, stacks, uptakes, and chutes to adapt boiler to premises in which it is installed.
- Flame cutting and knowledge of torch use.
- Responsible for observing and complying with all safety and project rules. Performs other duties as required.
JOB REQUIREMENTS
- Work within precise limits or standards of accuracy.- Apply shop mathematics to solve problems.
- Plan work and select proper tools.
- Compare and see differences in the size, shape and form of lines, figures and objects.
- Visualize objects in three dimensions from plans and drawings.
- Make decisions based on measurable criteria.
- Work at heights without fear.
- Work within precise limits or standards of accuracy.
- Apply shop mathematics to solve problems.
- Plan work and select proper tools.
- Compare and see differences in the size, shape and form of lines, figures and objects.
- Visualize objects in three dimensions from plans and drawings.
- Make decisions based on measurable criteria.
- Work at heights without fear.
QUALIFICATIONS
May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager.PHYSICAL REQUIREMENTS
1. Strength: a. Standing 60% Walking 20% Sitting 20% b. Lifting 50 lb. Carrying 50 lb. Pushing 70 ft-lb. Pulling 70 ft-lb. 2. Climbing F Balancing F 3. Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering FEXPLANATION OF SYMBOLS
NP Not Present O Occasionally (0-33%)F Frequently (34-66%)C Constantly (67-100%) Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development. Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. What We Do Mission & Values Diversity, Equity, & Inclusion Employment Employer Privacy Policy EEO is the Law ADP Privacy Statement Artificial Intelligence Google Privacy Policy Google Terms of Service #J-18808-Ljbffr Central Gulf Industrial Alliance- Worley in Baytown, TX is seeking an entry-level helper to support the construction and maintenance crew on industrial projects. The role involves reading blueprints to determine scope, preparing tools, and assisting skilled workers on site. You will handle basic hand tools...Suggested
$100 per hour
Job Description Job Description MISTRAS Group has an immediate need for Rope Access Boilermaker/Mechanical Technicians for project based work to start as soon as possible. MAJOR RESPONSIBILITIES/ACTIVITIES: Ability to perform heavy industrial metal-working...SuggestedLocal areaImmediate start- ...equipment and supplies. May assist in lifting, positioning and securing of materials and work pieces during installation. Performs minor maintenance or cleaning activities of tools and equipment. Assists other mechanics as needed. Respiratory protection is common and may be...SuggestedLocal areaImmediate startFlexible hours
- Austin Industrial is seeking a Level I Rope Technician 5 to perform maintenance, inspections, and repairs in hard-to-reach areas using rope access techniques on a full-time, on-site basis in Channelview, TX. The role supports a safety-conscious team. Candidates should have...SuggestedFull time
- OPD, a Koch Engineered Solutions company, seeks an Ironworker for a Baytown, TX site. You will assemble and secure structural supports, install steel beams, operate lifting gear, and communicate with the rigging crew. Requirements include 1.5+ years as an ironworker, knowledge...SuggestedShift work
- The job site located in Baytown, TX. has an opening for an Ironworker . Our Team Optimized Process Designs, LLC (OPD) is an engineering/construction company headquartered in Katy, TX with an expertise in the natural gas, natural gas liquids, and petrochemical industries...Flexible hoursShift work
- OPD, a Koch Engineered Solutions company, seeks an Ironworker in Baytown, TX to assemble and secure structural supports and install steel structures. You will handle lifting, rigging, and signaling with crane teams on active job sites and must meet strict safety and endurance...
- A Level I Rope Technician 5 role at Austin Industrial in Channelview, TX focuses on safe rope-access work for inspections, maintenance, and repairs in hard-to-reach areas. You will work under supervision and follow strict safety procedures in industrial settings. The position...Hourly pay
- Austin Industrial is seeking a Level II Rope Tech to perform rope access maintenance, inspections, and repairs at heights across industrial sites. The role requires 4+ years of journeyman experience, ASNT Level II certification, NCCER credentials, a valid driver’s license...Full time
- Austin Industrial in Channelview, TX is seeking a Level II Rope Access Technician to perform maintenance, inspections, and repairs in hard‑to‑reach areas using rope access techniques. This role requires comfort working at heights on construction sites and in industrial...
- Arctic Testing & Inspection (ATI) is seeking a Level 1 Rope Access Technician to perform inspections, maintenance, and light mechanical work on structures, vessels, and equipment using rope access techniques in accordance with IRATA or SPRAT standards. The role requires...
- Ironworker Helper - Baytown II, Texas We are seeking an experienced Ironworker Helper to join our team on the Baytown II project. This role involves assisting skilled ironworkers in the assembly, erection, and rigging of structural steel components. What You Will Do...Flexible hoursShift work
- Koch is seeking an Ironworker Helper for the Baytown II project in Baytown, Texas. The role involves assisting skilled ironworkers with assembly, erection, and rigging of structural steel components on site. Responsibilities include reading drawings, using hand tools,...Remote workShift work
- ...tools and care of the toolsUse of hand electric power tools and pneumatic toolsQualificationsEntry LevelIndustrial construction/maintenance industry experience preferredKnowledge of applicable safety rulesKnowledge of fire protectionPhysical RequirementsClimbing, Balancing...
- ...Stainless Steel Tanker Maintenance Technician The Stainless Steel Tanker Maintenance Technician performs repairs, inspections, and welding on specialized equipment. The incumbent works on basic electrical components and welding/fabrication to maximize safe and productive...Contract workTemporary work
- ...USA Craft Full-Time Requisition #: COMBO035254 Description About Austin Industrial Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years,...Full timeWork visa
- ...Hybrid Mechanical Maintenance Technician/Welder Summary: The Hybrid Mechanical Maintenance Technician/Welder is responsible for troubleshooting, repairing, installing, maintaining, and improving manufacturing and packaging equipment in a fast-paced industrial environment...Temporary workWork at officeLocal areaMonday to FridayWeekend work
- ...form completed structuresAssist in lifting, positioning and securing materials and work pieces during installationPerform minor maintenance/cleaning of tools and equipmentAssist other craft workers as neededQualificationsPhysical: While performing the essential functions...For subcontractorWork at officeImmediate start
- Taurus Industrial Group is seeking an Ironworker for Baytown, TX to erect, align, and secure structural steel on industrial projects. You will read blueprints, interpret drawings, and connect components using bolts, welds, rivets, and other methods. Must pass screenings...Seasonal work
- ...complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process. Ironworker - Baytown, TX Field Infra. Seasonal Technical Deer Park, TX, US 3 days ago Requisition ID: 1656 Summary The Ironworker is...Seasonal work
- TALKE USA Inc. is seeking a Hybrid Mechanical Maintenance Technician/Welder to support maintenance, welding, fabrication, and repairs across our industrial facilities in Baytown, Texas. The role emphasizes equipment reliability, preventive maintenance, and safe, efficient...
- Optimized Process Designs (OPD) is hiring an Ironworker in Mont Belvieu, TX. The role involves assembling and securing structural supports, installing structural steel, and operating lifting equipment. You will work with rigging teams to move heavy loads and ensure safe...Remote workShift work
$100 per hour
Job Description Job Description MISTRAS Group is seeking Rope Access Level III Technicians willing to work projects and travel as needed. Either certified as a Level I, II, or III Rope Access Technician (SPRAT or IRATA), or individuals with an interest in obtaining...Work at officeLocal areaShift work- ...equipment and supplies. May assist in lifting, positioning and securing of materials and work pieces during installation. Performs minor maintenance or cleaning activities of tools and equipment. Assists other mechanics as needed. Respiratory protection is common and may be...Local areaImmediate startFlexible hours
- ...equipment and supplies. May assist in lifting, positioning and securing of materials and work pieces during installation. Performs minor maintenance or cleaning activities of tools and equipment. Assists other mechanics as needed. Respiratory protection is common and may be...
$36 - $38 per hour
If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process. Gulf Coast Full Time Skilled Labor Baytown, TX, US 3 days ago Requisition ID: 1125 Salary Range: $36.00 To $38.0...Hourly payFull timeApprenticeshipShift workWeekend work- ...equipment and supplies. May assist in lifting, positioning and securing of materials and work pieces during installation. Performs minor maintenance or cleaning activities of tools and equipment. Assists other mechanics as needed. Respiratory protection is common and may be...Local areaImmediate startFlexible hours
- ...process required (GMAW and/or SMAW). Exhibit knowledge of material identification, equipment utilization, welder equipment set-up and maintenance. Must be able to work with minimal supervision. Ability to work safely and accurately. We Expect All Field Employees To Actively...Flexible hoursShift work
- Brown & Root Industrial Services in Baytown, TX is seeking a skilled welder to lay out, align and weld fabricated components into structural forms such as machinery frames, tanks and pipes, following blueprints and metallurgy. You will work with arc welding processes and...
- Tank Welders HMT is looking for capable Tank Welders who will be responsible for cutting and joining metals and other materials at our facilities or construction sites, using appropriate equipment. Your job will be to provide safe foundation for strong infrastructure...Apprenticeship
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Ironworker(maintenance). Be the first to apply!
- planned maintenance Baytown, TX
- commercial maintenance Baytown, TX
- sap plant maintenance Baytown, TX
- plant maintenance Baytown, TX
- maintenance specialist Baytown, TX
- hvac maintenance Baytown, TX
- maintenance Baytown, TX
- rail maintenance Baytown, TX
- maintenance representative Baytown, TX
- track maintenance Baytown, TX


