Marine Technician

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process. Full time Fort Lauderdale, FL, US 30+ days ago Requisition ID: 1052 Salary Range: $24.00 To $45.00 Annually Position Summary: Performs diesel engine service and repair including preventive maintenance, removal, installation, disassemble, assemble, recondition, testing, adjusting, technical analysis, troubleshooting, diagnostics, failure analysis, and commissioning (optional). Essential Duties and Responsibilities include the following. Other duties may be assigned as necessary. Disassembles, assembles, removes, and installs components on Diesel engines as directed by the Marine Technical Support Analyst Performs testing and adjustments on specific engine components as needed Appropriately prepares vessel and workplace to prevent cosmetic or other damage to vessel and the surrounding environment during the work process Remains in contact with Service Advisor and Field Service Supervisor during work process to apprise them of job progress Directs all customer technical, and other inquiries related to work being performed, to Marine Technical Support Analyst Completes, maintains and processes pertinent paperwork and records Processes repair parts cores in accordance with service department procedures Completes, maintains and processes pertinent paperwork and records in A/X Processes repair parts cores in accordance with service department procedures Customer Authorization Form on CAT Inspect app Diagnostics and troubleshooting Review application and installation requirements for Marine engines Failure analysis on Marine Engine components Startup and commissioning of Marine Engine systems Using the CAT Inspect app, properly use the Pantropic Power Contamination Control Inspection Form Using the CAT Inspect app, properly use the Pantropic Power Safety Inspection checklist V1.1 Using the CAT Inspect app, properly use the Pantropic Power Service Truck inspection: Safety and Maintenance Using the CAT Inspect app, properly use the Pantropic Power TA1 Marine Engine Inspection Form Using the CAT Inspect app, properly use the Pantropic Power Work Authorization V1.4 Foundational Skill Level (2&3) The individual will: Knowledge Discuss terminology, concepts, principles, issues, applications, and implications of changes to processes, policies, and procedures of the following: Air intake and exhaust systems Lubrication systems Cooling systems Emissions systems Component reuse and salvage Basic Cat electric power Generator systems Skills Perform the following diesel engine-related tasks: 2001 Explain the fundamental operating principles of diesel engines. 2002 Identify components, explain the purpose and describe the basic operation of the Lubrication System. 2003 Identify components, explain the purpose and describe the basic operation of the Cooling System. 2004 Identify components, explain the purpose and describe the basic operation of the Air Intake & Exhaust System. 2005 Identify components, explain the purpose and describe the basic operation of the Auxiliary raw water system HEX / Keel Cooled 2006 Identify components, explain the purpose and describe the basic operation of the Mechanical Unit Injector (MUI) fuel system. 2007 Identify components, explain the purpose and describe the basic operation of the Electronic Unit Injector (EUI) fuel system. 2008 Identify components, explain the purpose and describe the basic operation of the Hydraulic Electronic Unit Injector (HEUI) fuel system. 2009 Identify components, explain the purpose and describe the basic operation of the Common Rail Fuel System. 2010 Identify components, explain the purpose and describe the basic operation of a small engine Fuel System. 2011 Describe the general service procedures (preventive maintenance) of diesel engine systems. 2013 Describe the procedures for removing and reinstalling diesel engines and their components. 2014 Perform remove and install diesel engine and its components. 2015 Identify the steps in performing a TA1 Visual Walk-Around Inspection 2016 Demonstrate Use of S.I.S. (Service Information System). 2017 Demonstrate Use of TMI (Technical Marketing Information System). 2018 Demonstrate Use of a Digital Multimeter, Using the Voltage, Resistance, and Diode Switch Positions. 2019 Demonstrate Use of AX time entry and order placing 2020 Identify components, explain the purpose, and describe the basic operation of the Separate Circuit Aftercooler System 2021 Explain the fundamental concepts, properties, and interrelationships of DC theory as they relate to EP 2022 Using Ohm’s Law calculate voltage, current, or resistance 2223 Using ohm’s Law and Kirchhoff’s Laws, calculate voltage, current, and resistance in a series circuit, parallel circuit, and series / parallel circuit. 2224 Describe the theory, concepts, and terminology of Alternating Current (AC) that relate to Electric Power 2225 Explain the different kinds of power related to generators 2226 Explain the operating theory of a generator 2227 Identify generator excitation systems, components, and their functions 3001 Describe the operation of a basic electrical circuit 3002 Interpret basic electrical schematics 3003 Identify electrical measurements using a digital multimeter 3004 Identify faults in an electrical circuit 3005 Identify soldering techniques on electrical equipment 3006 Perform wire maintenance task on electric & electronic circuit 3007 Perform electrical measurements using a digital multimeter 3008 diagnose and repair faults of a basic electrical circuit 3009 Identify components and explain the operation of various gauges and warning lights 3010 Identify the type and explain the purpose and operation of semiconductors, diodes, and transistor 3011 Explain the function, construction, and principles of operation of lead-acid batteries 3012 Explain the construction and characteristics of different types of batteries 3013 Determine the serviceability of a lead-acid battery 3014 Explain preventive maintenance procedures and charge a lead-acid battery 3015 Demonstrate visual inspection of Crankshaft as per Media Number -SEBF8039 3016 Demonstrate visual inspection of Connecting Rods as per Media Number -SEBF8063 3017 Demonstrate visual inspection of Pistons as per Media Number -SEBF8049 3018 Demonstrate visual inspection of Valves, Valve Springs, and Valve Bridges as per Media Number -SEBF8002 3019 Demonstrate visual inspection of Camshafts as per Media Number -SEBF8146 3020 Demonstrate visual inspection of Cylinder Liners as per Media Number -SEBF8068 3021 Demonstrate visual inspection of Critical fasteners as per Media Number -SEBF8301 3022 Demonstrate visual inspections of Turbochargers as per Media Number -SEBF8018 3023 Demonstrate visual inspections of Slipper Followers and Roller Lifters as per Media Number -SEBF8067 3024 Demonstrate visual inspections of Main Bearings and Connecting Rod Bearings as per Media Number -SEBF8009 Behaviors Value the importance of safe operation and proper maintenance Follow maintenance interval recommendations Marine Learning Solutions – Foundational Basic TA1 Walk-Around Inspection: Commercial Engine Family (English) Engine Fundamentals - Customer Education - (English) Engine Fundamentals - (English) Preventive Maintenance & Walkaround Inspection (TA1) ILT Basics of Electricity for Electric Power Cat Electric Power I - Course 1 - Introduction and DC Theory (English) Cat Electric Power I - Course 2 - Circuits (English) Cat Electric Power I - Course 3 - Alternating Current (English) Cat Electric Power I - Course 4 - Power (English) Cat Electric Power I - Course 5 - Generators (English) Cat Electric Power I - Course 6 - Electric Power Products and Information (English) Cat Electric Power I - Course 7 - Calculations for EPG (English) RDLC - Cat Electric Power I Required Tools 3/8" drive 12 points 1/4"-3/4" socket set 3/8 drive 12 points 10mm-19mm socket set 3/8" drive 6" extension 3/8" drive 3" extension 1/2" drive 12pt 7/16"-1 1/8" socket set 1/2" drive 24" breaker bar 1/2" drive 10" extension 1/2" drive universal joint Combination wrench set 1/4"-1" Combination wrench set metric 10mm-19mm Adjustable wrench 8", 10" 12" Flathead screwdrivers Phillips head screwdrivers Diagonal cutters Gasket scraper 2lb ball peen hammer 16" pry bar Hacksaw 12-24V voltage tester or multimeter Small punch/chisel set Magnetic retrieval tool (telescoping) Flashlight Seal pick Oil Filter Strap Wrench Tool Box - Chest and Cabinet Battery post/terminal brush Combination wrenches to 1 1/8"-1 1/2" 1/2 drive torque wrench 30-250 Ft./Lb 3/8" drive 12 points 3/8"-3/4" universal socket set 1/2" drive socket set 12mm-32mm 3/4 drive socket set 3/4" -2 1/8" 3/4 drive breaker bar or ratchet Socket Drive Adapters 1/4, 3/8, 1/2, 3/4 Pin Punch Set Drift Punch Set Chisel Set Pry Bar 24", 36" Dead Blow Hammer Heel bar medium 10-12" 1/4" drive 12 point socket set 1/4"-1/2" 3/8 drive hex driver set 1/8"-3/8" 3/8 drive hex driver set 4mm-17mm 3/8 drive torque wrench 100-250 In/Lb Large hammer 6 Lb or greater Metal file set (flat, round, half-round) A small mirror (telescoping) Drop light 12V Tubing cutter Tool Bag Combination wrench set 19mm-32mm Marine Learning Solutions – Foundational Basic TA1 Walk-Around Inspection: Commercial Engine Family (English) Engine Fundamentals - Customer Education - (English) Engine Fundamentals - (English) Preventive Maintenance & Walkaround Inspection (TA1) ILT Basics of Electricity for Electric Power Cat Electric Power I - Course 1 - Introduction and DC Theory (English) Cat Electric Power I - Course 2 - Circuits (English) Cat Electric Power I - Course 3 - Alternating Current (English) Cat Electric Power I - Course 4 - Power (English) Cat Electric Power I - Course 5 - Generators (English) Cat Electric Power I - Course 6 - Electric Power Products and Information (English) Cat Electric Power I - Course 7 - Calculations for EPG (English) RDLC - Cat Electric Power I Advanced Skill Level (4&5) The individual will: Knowledge Discuss terminology, concepts, principles, issues, applications, and implications of changes to processes, policies, and procedures of the following: Air intake and exhaust systems Lubrication systems Cooling systems Emissions systems Component reuse and salvage Cat electric power Generator systems Basic commissioning Skills Perform the following diesel engine-related tasks: 4001 Demonstrate the steps for Finding Top Center Compression Position for the No. 1 Piston 4002 Demonstrate the steps for performing a Valve Lash and Valve Bridge Adjustment on C7 thru C32 4003 Demonstrate the steps for performing a Valve Lash and Valve Bridge Adjustment on D3500 4004 Demonstrate the steps for performing a Cylinder Liner Projection 4005 Demonstrate the steps for performing a Flywheel face and bore runout 4006 Demonstrate the steps for performing a Fuel Injector Adjustment on EUI Engines 4007 Demonstrate the steps for performing a Fuel Injector Adjustment on MUI Engines 4008 Demonstrate the steps for performing a Camshaft Timing on D3500 4009 Demonstrate the steps for performing a Fuel Injector Synchronization on a D3500 MUI 4010 Demonstrate the steps for performing a Fuel Setting adjustment on a D3500 MUI 5001 Demonstrate the steps for performing a Communication issue with CAT ET 5002 Demonstrate the steps for performing a Communication Issue with the ECM 5003 Demonstrate the steps for performing an ECM Flash and Configuration Set-up 5004 Demonstrate the steps for performing a Parameter Setting of the Engine Monitoring System 5005 Demonstrate the steps for performing an FMI-03 Voltage High Condition 5006 Demonstrate the steps for performing an FMI-04 Voltage Low Condition 5007 Demonstrate the steps for performing a Sensor Supply Fault 5008 Explain the difference between a diagnostic and an Event 5009 Demonstrate the steps for performing an Engine Cranks but Does Not Start Issue 5010 Demonstrate proficiency using an interactive Electrical Schematic 5011 Demonstrate the steps for performing an Injector Trim File Install 5012 Demonstrate the steps for performing an Electronic Timing Calibration 5013 Demonstrate the steps for performing a repair on a Deutsch HD and DT connectors 5014 Demonstrate the steps for performing a Performance Sea Trail as per – LEBM5081 Behaviors Value the importance of following the process and procedure Provide prompt feedback to the customer in a professional manner Fix issues correctly the first time Follow reuse and salvage guidelines Marine Learning Solutions – Advanced Engine System Level 2 Assessment Engine Performance Diagnostic Exercise 18B - (English) Engine Performance Diagnostic Exercise 20 - (English) Engine Performance Diagnostic Exercise 21 - (English) Engine Repair Diagnostic Exercise 16 - (English) Engine Repair Diagnostic Exercise 17 - (English) Cat 3406 and 3054 Engine Performance Course - (English) EP C01.5 - Cat 3406 and 3054 Fuel Injection Components - (English) EP C02 - Cat 3406 Air Management - (English) EP C04 - Cat C15 Engine Electronic Control System - (English) EP C05 - Cat C - 9 Engine Electronic Control System - (English) Marine Installation Considerations Part A (English) Marine Installation Considerations Part B (English) PM4 Maintenance Interval Schedule (MIS): Commercial Engine Family (English) Tier 4 Interim Exhaust Emissions Regulations for Electric Power Tier 4 Interim Solutions for Electric Power Tier 4 Interim/Stage IIIB Exhaust Emissions Regulations - Sales (English) C175 Engine Training D3500 Master Mechanic D3600 Master Mechanic Marine Control Systems - SERV1901 Marine Engine Systems - SERV1909 OJT - Advanced Engine Repair Required Tools Screw extractor (easy-out) set High speed or cobalt drill bit set 1/16"-3/8" Vernier or dial calipers Large pry-bar 24" or greater 3/8" drive universal socket set 10mm-19mm Fractional Ratcheting Wrench set 5/16 - 3/4 Scraper Large pipe wrench 18-24" Metric Ratcheting Wrench set 8mm - 19mm Angle Wrench Set 30 and 60 deg Offset 8mm - 19mm Angle Wrench Set 30 and 60 deg Offset 1/4 - 15/16 3/4" drive socket set 19mm-50mm 3/4" drive breaker bar or ratchet Socket Drive Adapters 1/4, 3/8, 1/2, 3/4 Pin Punch Set Drift Punch Set Chisel Set Pry Bar 24", 36" Dead Blow Hammer Heel bar medium 10-12" 1/4" drive 12 point socket set 1/4"-1/2" 3/8 drive hex driver set 1/8"-3/8" 3/8 drive hex driver set 4mm-17mm 3/8 drive torque wrench 100-250 In/Lb Large hammer 6 Lb or greater Metal file set (flat, round, half-round) A small mirror (telescoping) Drop light 12V Tubing cutter Tool Bag Combination wrench set 19mm-32mm Expert Skill Level (6&7) The individual will: Knowledge Describe core engine application and integration with other systems Diagnose and troubleshoot complex diesel engine issues Determine the proper approach to investigate core engine issues Explain and exhibit relevant elements of the commissioning process (e.g., mounting, alignment) for various engine applications Skills Perform the following diesel engine-related tasks: 6001 Demonstrate the steps for troubleshooting Coolant Temperature is to High 6002 Demonstrate the steps for troubleshooting Low Oil Pressure 6003 Demonstrate the steps for troubleshooting Air Inlet Temperature is to High 6004 Demonstrate the steps for troubleshooting Exhaust Temperature is to High 6005 Demonstrate the steps for troubleshooting Low Fuel Pressure 6006 Demonstrate the steps for troubleshooting Low Power Complaint 6007 Demonstrate the steps for troubleshooting Excessive Oil Consumption 6008 Demonstrate the steps for troubleshooting Excessive Black Smoke 6009 Demonstrate the steps for troubleshooting Excessive White Smoke 6010 Demonstrate the steps for troubleshooting a CAT Datalink issue 6011 Demonstrate the steps for troubleshooting a CAN Datalink issue 6012 Demonstrate the steps for troubleshooting Multi Station Control System Faults 6013 Demonstrate the steps for troubleshooting Marine Engine Electronic Displays 6014 Demonstrate the steps for troubleshooting DEIF Electronic Displays 6015 Demonstrate the steps for troubleshooting Auto-Maskin Electronic Displays 7001 Analyze and Interpret Sea Trial Data using CAT ET, CAMPAR, #J-18808-Ljbffr ADP, Inc.