Calibration Technician (Regulated Industry)
Mentor Technical Group
Mentor Technical Group (MTG) provides a comprehensive portfolio of technical support and solutions for the FDA-regulated industry. As a world leader in life science engineering and technical solutions, MTG has the knowledge and experience to ensure compliance with pharmaceutical, biotechnology, and medical device safety and efficacy guidelines. With offices in Caguas, PR, Boston, MA & San Francisco, CA and we serve life sciences clients in six global markets: United States, Puerto Rico, Dominican Republic, Mexico, Germany, Canada, and South America.
Job Responsibilities:
- Experience performing calibrations in Pharmaceutical Industry Environment. Biotechnology preferred.
- Strong Knowledge of tolerance calculation
- Experience in Calibration system assessment
- Strong knowledge of process tolerance evaluation.
- Process Instrumentation/ Calibration to manage the calibration program.
- Experience performing calibrations to Bioreactors, Utilities, Formulation, and Aseptic Areas.
- Experience in Blue Mountain (RAM), Calman, or Procal Software is highly preferred.
Must possess experience in:
- Temperature
- Technologies
- Pressure
- Humidity
- Flow
- Mass
- PH
- Conductivity
- Dimension and Electrical
- Knowledge in cGMP
- Associate degree in Instrumentation Engineering
Mentor Technical Group es un empleador que ofrece igualdad de oportunidades y todos los solicitantes calificados recibirán consideración para el empleo sin importar raza, color, religión, sexo, orientación sexual, identidad de género, información genética, origen nacional, estado de veterano protegido, estado de discapacidad o cualquier otro grupo protegido por ley.
Mentor Technical Group is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, protected veteran status, disability status, or any other characteristic protected by law.
- ...Technical GroupMentor Technical Group (MTG) provides a comprehensive portfolio of technical support and solutions for the FDA-regulated industry. As a world leader in life science engineering and technical solutions, MTG has the knowledge and experience to ensure...Suggested
- ...Measurement equipment who are looking for a calibration technician. Position Summary The Calibration... ...functions properly and meets industry standards. Key Responsibilities Inspect... ...experience in calibration or working in regulated industries requiring precision measurement...SuggestedFull timeWork at office
- ...optimizing both preventive maintenance (PM) and calibration procedures to maximize asset... ...Education: Bachelor’s Degree in Engineering, Industrial Maintenance, Mechatronics, or a related... ...automated manufacturing equipment in a regulated industry (Biotech, Pharma, or Medical...SuggestedFlexible hoursShift work
$24 - $26 per hour
...for a Quality Engineering Technician Location: Carlsbad,... ...environment. Experience calibrating machine shop gauges and precision... ...in cGMP and/or ISO-regulated environments required.... ...to support a wide variety of industries and occupations. The...SuggestedHourly payWeekly payWork at officeImmediate startShift workDay shift$31 - $40 per hour
...uptime, and maintenance excellence within a regulated manufacturing environment. This role is... ..., preventive maintenance programs, calibration activities, and managing spare parts.... ...s degree in Engineering, Mechatronics, Industrial Maintenance, or related field. Experience...SuggestedContract workTemporary workDay shift$26 - $30 per hour
...Job Title: Quality Technician (2nd Shift) Job Description The Quality Technician (2nd Shift... ...with all procedures, rules, and regulations. Complete all required paperwork and... ...rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek...Weekly payContract workTemporary workWork at officeFlexible hoursAfternoon shift- ...and maintenance • Strong understanding of electrical standards and codes applicable to the pharmaceutical industry • Demonstrated ability to work in GMP-regulated environments • Excellent problem-solving and troubleshooting skills • Strong communication skills with the...Full time
- ...unparalleled 5-Star experience unmatched in the Smart Security industry.As an EHP, you'll play a pivotal role in what matters most to... ...Highest sales commission opportunities in the industry with our technicians earning on average 25% commission - UNCAPPED!More than 30% of...Local areaRemote work
$30 per hour
...Electronics Repair Technician (2M) A government contract requires that this position be... ...light receptacles, rectifiers, generators/regulators, air cleaner blower motors, traverse... ...state driver's license. Able to work in industrial, field, and office environments....Permanent employmentFull timeContract workTemporary workWork at officeLocal areaFlexible hoursNight shift$45 - $60 per hour
...Job Description Job Description Experienced Elevator Repair Technician / Adjuster Position Overview Advantage Elevator is seeking... ...for a seasoned elevator professional with 10+ years of industry experience who is highly skilled in troubleshooting, repair,...Hourly payTemporary workFor contractorsWork at officeRelocationRelocation package$135k - $165k
...trust both you and the system. Desired Skills ~ A degree in Industrial Engineering, Systems Engineering, Operations Research, or a... ...Bonus Points Prior work in defense, government, or other regulated environments — or military service yourself. Cloud (AWS or...Live inVisa sponsorship$83.3k - $133.28k
At ABB, we help industries run leaner and cleaner—and every person here makes that happen. You’ll be empowered to lead, supported to grow, and proud of the impact we create together. Join us and help run what runs the world.This position reports to:Technical Consulting...Full timeRemote workHome officeMonday to Friday$80.5k - $149.5k
...or experience with VHDL, Verilog, Power, Analog, Antennas, Controls, RF, Modem, EDA, DSP, MATLAB, Communication Systems, Aerospace industry ~ Work and/or project experience in any of the following: Digital, Analog, or RF circuit design, Communications, Digital Signal...Local areaFlexible hours$97.5k - $138.3k
...Facilitates resolutions to problems or technical issues using common industry methods Uses oral and written communication skills,... ...in addition to locating specific requirements (such as rules, regulations, contracts, references) that apply to tasked work and applicable...Work at officeLocal areaImmediate startFlexible hoursShift work- ...world for diverse applications such as seawater desalination, industrial high-purity water, surface water treatment, wastewater... ...control circuitry on production equipment.Trans maintenance technicians on electronic control trouble-shooting equipment techniques.Models...For contractorsWork at office
$90k - $105k
...Electronics Test EngineerHunter Industries is seeking an Electronics Test Engineer who develops, implements, and executes test plans... ...- $105,000.The Company complies with all federal/local/state regulations in regard to pay. The above represents the expected hourly range...Hourly payWork experience placementLocal area- LGSTX Services is seeking an Industrial Maintenance Tech to perform preventive maintenance, troubleshooting, and repair of conveyor systems and material handling equipment across multiple facilities in the Carlsbad/San Diego region. The role involves traveling between...Remote job
$48.1k - $86.95k
Description Leidos is seeking an experienced Electro-Mechanical Technician to join our team at the Vista, CA facility, supporting the... ...agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers...$65k - $75k
...level ~ Associate Employment type ~ Full-time Job function ~ Engineering and Customer Service Industries ~ Semiconductor Manufacturing Referrals increase your chances of interviewing at Insight Global by 2x Inferred...Full timeMonday to FridayWeekend work- ...is preferred* Valid driver’s license is required* Minimum 8 years of progressively responsible experience maintaining commercial, industrial, manufacturing, or R&D facility infrastructure.* Minimum 5 years of advanced experience supporting complex HVAC and central plant...Hourly payPermanent employmentFor contractors
$80k - $115k
Hunter Industries is seeking an Electrical Manufacturing Engineer to join our Contract Manufacturing team! In this role you will identify... ...- $115,000The Company complies with all federal/local/state regulations in regard to pay. The above represents the expected salary...Full timeContract workWork at officeLocal areaWorldwideFlexible hours$115k - $140k
...systems for building power, i.e. normal, emergency, and standby power distribution systems for 208v, 480v, and medium voltage for industrial facilities.Take the lead in documenting all necessary calculations for the design such as short circuit, selective coordination,...Work experience placementLocal area- ...maintenance and automated manufacturing equipment. ~ Liquid handling, dispensing, plasma, or automated assembly equipment experience is a plus. ~ Regulated biotech, pharmaceutical, or medical device manufacturing experience preferred. Eastridge Workforce SolutionsDay shift
$45 - $60 per hour
...Overview: At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with: Competitive Compensation: Competitive pay from $45....ApprenticeshipLocal areaImmediate startRelocationRelocation package$31 - $40 per hour
...uptime, and maintenance excellence within a regulated manufacturing environment. This role is... ..., preventive maintenance programs, calibration activities, and managing spare parts.... ...s degree in Engineering, Mechatronics, Industrial Maintenance, or related field. Experience...Contract workTemporary workDay shift- ...federal agencies and other underwater industries for over 48 years. Amron is hiring... ...technical support for production test technicians and staff. Provides technical support... ...performing design work in a similarly regulated industry. Experience in digital audio signal...Full timeContract workImmediate start
$33 - $40 per hour
...the Role We’re seeking a highly skilled and motivated Avionics Technician specializing in depot-level modifications and new systems... ...level: Associate Employment type: Contract Job function: Other Industries: Aviation and Aerospace Component Manufacturing Benefits Medical...Contract workRelocation package$25 - $35 per hour
...Are you ready to start your career in a lucrative industry with a company that values its people and provides top-notch training? At... ...the highest quality services in the industry. We provide our technicians with cutting-edge training, exceptional support, and well-organized...Full time$20 - $23 per hour
...Marea Senior Living. As Medication Technician , you’ll play an essential role in enriching... ...different from other companies in this industry is our willingness to embrace change.... ...including CMS, Medicare, and Medicaid regulations, as well as state-specific licensing or...Full timePart timeLocal areaFlexible hours$20 - $30 per hour
...MRC are looking for experienced ammonia refrigeration service technicians who know the trade, take pride in their work, and can perform... ...are counting on them. This role is for skilled industrial refrigeration professionals with real ammonia field-service experience...Hourly payDaily paidApprenticeshipLocal area
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Calibration Technician (Regulated Industry). Be the first to apply!



