Process Engineer
EV Group
Job Title: Process Engineer I
Reports to: Director of Technology North America
Classification: Exempt
Summary:
This position entails appropriately applying fundamental engineering principles and concepts. Must be able to draw solutions from both formal training and experience. Under general direction, the Process Engineer I must plan and perform engineering duties for part of a major project or for projects of moderate complexity. They may provide work direction to Technicians and less experienced Process Engineers. Work is primarily involved with the development or improvement of actual products or designs. The typical cycle includes conceptualizing, developing prototypes, testing, and perfecting designs.
Essential Duties and Responsibilities:
To perform this job successfully, individual must be able to perform each of the primary duties satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required:
- Presents EVG technology to prospective customers.
- Organizes and performs equipment and process demonstrations for and with prospective customers.
- Provides process support to customers (remotely and onsite), sales and service staff.
- Organizes and performs contract services for and with customers.
- Creates technical reports.
- Must be able to travel domestically and internationally overnight, as needed, up to 50% of the time. Must possess a valid passport.
- This position requires the use of EVG hired vehicles on EVG business. Individuals must be physically capable of operating the vehicles safely, possess a valid drivers license and have acceptable driving privileges.
- Other duties, as assigned.
Additional Duties and Responsibilities:
- Ability to work well under minimal supervision as well as with a team.
- Works with Technology Administrator to learn policies and procedures within the Technology Department.
- Complies with EVG and ASU-MTW lab policies.
- Maintains EVGs cleanroom and equipment. Tracks consumable usage and reorders supplies as necessary.
- Ensures OSHA compliance in lab.
Qualifications / Education / Skills and Experience:
- Individual must have a four-year engineering degree. Chemical, Mechanical or Materials Science and Engineering degrees are preferred.
- Applicant should have up to two (2) years of process engineering experience.
- Excellent oral and written communication skills with the ability to effectively present information to factory employees and engineers.
- Strong computer skills including proficiency with MS Office software.
- Ability to work in cleanrooms.
Physical Demands:
- While performing duties of this job, individual is regularly required to stand, sit, reach with hand and arms, stoop, kneel, crouch, crawl and lift/move up to 50 pounds. Visual acuity required. Individual is required to use hands to finger, handle or feel objects, tools, or controls frequently and be able to reach with hand and arms above shoulder level occasionally.
- Ability to wear proper cleanroom attire and work inside the fab/cleanroom up to 75% of the time.
This job description in no way states or implies that these are the only duties to be performed by the employee in this position. Employee will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.
A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements
may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.
PIf629e56ebc92-26289-40993389
- ...Join to apply for the Process Engineer IV role at Curia Process Engineer IV – Albuquerque, NM Build your future at Curia, where our work has the power to save lives. Curia is a global contract development and manufacturing organization (CDMO) with over 30 years of experience...SuggestedFull timeContract workWork at officeShift work
- ...Job Title This role is ideal for an engineer who enjoys working directly with tools, running experiments, solving problems quickly... ...sustaining support related to manufacturing. Evaluate and improve processes in manufacturing systems through disciplined problem-solving...SuggestedPermanent employmentContract work
$117.8k - $176.8k
...the world’s leading integrated design practice. Our architects, engineers, interior designers, consultants, sustainability specialists,... ...us and design your place with Stantec. Your Opportunity The Sr. Process Engineer will be responsible for managing projects across the Advanced...SuggestedFull timeTemporary workPart timeCasual workWork at officeLocal areaFlexible hours- ...security missions worldwide. Job Description This position is contingent upon award of contract SOSi is seeking a Business Process Engineer to support mission requirements for a structured approach to further develop, integrate, and sustain a scalable, federated...SuggestedContract workPart timeRemote workWorldwide
$120.86k - $170.63k
Job Details: Job Description: The Role and Impact As a Process Integration and Yield Engineer, you will play a pivotal role in driving Intel's mission to deliver world-class semiconductor solutions. This role offers an exciting opportunity to define and execute technology...SuggestedFull timeInternshipLocal areaImmediate startShift work- ...Job Description Job Description Salary: Job/Position Summary The Senior Process Engineer Electroless Copper is responsible for the development, optimization, qualification, and control of electroless copper deposition processes used in glass panel semiconductor...Relocation
- ...Job Description Job Description Salary: Job/Position Summary The Senior Process Engineer DFR Developer & Stripper is responsible for the development, optimization, qualification, and control of dry film resist (DFR) developing and stripping processes used in...Relocation
- ...Job Description Job Description Pulsed Power Engineer (Junior to Senior Level) I-Pulse Albuquerque LLC We are seeking innovative pulsed-power engineers with a focus on commercial applications. Candidates should have a background in electrical engineering, physics...Work at office
- ...Job Description Job Description Salary: Job/Position Summary The Senior Process Engineer Cleaning Processes is responsible for the development, optimization, qualification, and control of advanced cleaning processes used in glass panel semiconductor manufacturing...Relocation
$70.8k - $123.6k
...is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are... ...(IWTO) team is seeking a mid-level Industrial Water Process Engineer with 5+ years of consulting engineering experience to...Full timePart time$117.3k - $226.9k
...Electrical Power Engineer (Engineering Specialist - Electrical Engineering) The Aerospace Corporation is the trusted partner to the... ...Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits...Full timeImmediate startRemote workRelocation packageFlexible hours$86.8k - $165.2k
...the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead... ...signal circuit design or analysis and / or digital signal processing. Experience with analog laboratory equipment such as waveform...Temporary workWork experience placementInterim roleWork at officeRemote workRelocationFlexible hours- ...of the boldest and most ambitious space missions EQUIPMENT ENGINEER, LEAD Based out of Rocket Lab's site in Albuquerque, New Mexico... ...a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at...Permanent employmentLocal area
- ...Description Salary: Job/Position Summary The Head of Equipment Engineering & Tool Installation will lead the specification review,... ..., qualification, maintenance setup, and ramp readiness of process and metrology tools for the companys advanced substrate manufacturing...Temporary workFor contractorsLocal area
- ## Manufacturing Engineer 2Applylocations: Albuquerque, UStime type: Full timeposted on: Posted Yesterdayjob requisition id: JR6491It's... ...sustaining production. As the ME, you will define the assembly process, product flow, materials, methods, and tools necessary to bring...
- ...community. Our team of intellectually curious and highly motivated engineers, scientists and business professionals engages with our clients... ...with the community. Strata-G is seeking an experienced Sr. Process Engineers with the following: Summary: ~ Sr. Process...Full timeContract workRemote workWork visa
$42.34k - $72.58k
...completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please fill out the accommodations form by clicking on this link Accommodation for disability form . If you're unable to complete...Permanent employmentWork at officeLocal areaImmediate startNight shift- ...Manufacturing Engineering Technician in Albuquerque, NM Build your future at Curia, where our work has the power to save lives Curia... ...personnel to support equipment readiness, manufacturing processes, troubleshooting efforts, personnel development, and continuous...Contract workWork at office
$136.85k - $185.15k
...future with us. Boeing Defense, Space and Security (BDS) is looking for a Lead or Senior Verification and Validation Systems Engineer to join our team in Albuquerque, NM developing new advanced concepts on a DOD propriety program. The position will be embedded...Permanent employmentCurrently hiringRelocationVisa sponsorshipWork visaFlexible hoursShift workDay shift- ...Job Description The TRISO Furnace Engineer will evaluate current manufacturing processes and identify opportunities to improve scale, quality, and throughput by assessing furnace architectures and features. This role partners with external vendors to translate process...
$140.83k - $198.82k
...Description Join Intel's dynamic supply chain team as a Supply Chain Engineer and play a pivotal role in shaping the future of semiconductor... ...Intel's roadmap, resolve market challenges, and optimize processes to enhance product quality, reliability, and efficiency. This...Local areaImmediate startShift work- ...This Opportunity We are seeking a RESIDENT ENGINEER to join our Construction Management Team in the Albuquerque, NM area. Be involved in projects with our Construction Management Team Team and be a part of a growing team that meets our client’s objectives and solves their...Contract workWork at office
- ...Career Opportunities with Calvary Albuquerque Inc The Senior Video Engineer is responsible for leading the video portion of the Production Team in their preparation and execution of live services. This position leads the technical production of the Calvary’s video needs...Full timeContract workRemote workWeekend work
- ...About the role The Senior Coating Engineer is responsible for the development, design, qualification, optimization, and transfer of... ...for optical coatings, thin film technologies, and deposition processes. Evaluate emerging coating technologies, materials, and equipment...Permanent employmentWork at officeLocal area
$21 - $28 per hour
...participate in E-Verify. About This Role FiberTel is seeking a Walkout Engineer for our Albuquerque, NM location. This role conducts site... ...accurate and detailed planning to support the construction process and involves permitting work in the Albuquerque area. Pay for this...Temporary workWork at officeLocal areaFlexible hours- ...throughout the life of the property. Position Description: The Office Engineer (OE) position supports the execution of work in the field with... ...partner employees involved in the submittal and shop drawing process. Perform detailed reviews and provide approvals of submittals,...Contract workFor contractorsInternshipWork at officeLocal area
- ...In-Office Position Engineers will be provided an opportunity to expand their technical knowledge of the distribution system. They will... ...closely with the project team throughout the design and construction process, adapting electrical plans according to budget constraints,...Contract workWork at office
$150k
...range: $150,000.00/yr - $150,000.00/yr. Direct message the job poster from {devlogic} Founder & Tech Recruiter | Building Software Engineering Teams $150k + equity Looking to join a founding team using AI to rethink healthcare? We’re hiring a Founding AI Engineer for a...Full timeWork at officeRelocation package- ...Resident Engineer We are seeking a RESIDENT ENGINEER to join our Construction Management Team in the Albuquerque, NM area. This role involves providing technical leadership, construction engineering, and construction management for a variety of projects such as roadway...Contract workWork at office
$150k - $200k
...every day. To learn more, please see . The AI Automation Engineer – Finance & Accounting applies AI to finance operations at Cengage... ...Automate accounts payable and accounts receivable processing including invoice capture, matching, and approval Build reconciliation...Live inLocal areaWorldwide
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Process Engineer. Be the first to apply!
- process improvement engineer Albuquerque, NM
- coating process engineer Albuquerque, NM
- process engineer injection moulding Albuquerque, NM
- warehouse process engineer Albuquerque, NM
- process engineer Albuquerque, NM
- foundry process engineer Albuquerque, NM
- senior manager process engineering Albuquerque, NM
- process engineer medical device
- assembly process engineer
- rubber process engineer


