Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Electronics Technician Level (Electronic Assembly)

$32 - $41 per hour

Crane Company

Crane Aerospace & Electronics – Electronics Technician II or III Crane Aerospace & Electronics supplies critical systems and components to the aerospace and defense markets. They operate in environments ranging from engines to landing gear, satellites, medical implants, missiles, and unmanned aerial systems. The Burbank, CA facility focuses on brake control systems and premium cabin actuation solutions. Job Summary The Technician performs calibration and functional tests on electronic subassemblies and end items of moderate complexity in accordance with established procedures. The Technician I also performs more complicated testing under close direction in support of high-volume production test operations. Essential Functions Perform assigned testing operations within the assigned functional area. Create non-conformance reports including detailed description of testing performed, resulting failure and initial root‑cause investigation results. Interpret and work in accordance with work orders, drawings and schematics, functional and acceptance test procedures, failure reports, manuals and all other applicable engineering and production specifications. Calibrate or otherwise adjust assigned units by means such as component selection, potentiometer adjustment, clocking or other positioning, shimming, tension or coil adjustments, bearing and gear adjustments, as appropriate for specific unit; make required mathematical calculations for voltage, resistance, current, impedance, amplification, flow rate and mass, mechanical dimensions and adjustments. Perform automated testing and performance testing using a variety of automated testing equipment and special test console to simulate in-service specifications, including but not limited to vibe, burn‑in, thermal cycle and leak test. Perform manual testing involving setup, adjustment, operation and interpretation of results from standard and special purpose test equipment applicable to assigned product area, such as differential and multimeters, signal generators, power supplies, bridges, oscilloscopes, altitude chamber, flow meter and hi‑pot. Test units in other programs not normally worked on and units of greater complexity under close supervision. Practice safe work habits as established by OSHA and Crane policy. Support Crane Business System (CBS) initiatives including 5S, KPI, Standard Work, Problem Solving, and other initiatives as they arise. Flexible and willing to work overtime as necessary. Any other task assigned by supervisor or management. Minimum Qualifications Experience: 2 to 5+ years in a highly regulated manufacturing environment, or equivalent educational background. Knowledge: Familiarity with product flow through a manufacturing or repair environment; working knowledge of computer systems. Skills: Good oral expression and comprehension; good written expression and comprehension; proactive problem solving. Abilities: Ability to learn new test software and equipment and identify non-conforming conditions; manual and finger dexterity; ability to make precisely coordinated movements; ability to work in multiple software systems; analytical thinking and providing constructive feedback. Education/Certification: High School diploma or equivalent. Employment Eligibility Requirement: Position may require access to Controlled Data or Information. Where necessary only US persons will be considered. As a US Department of Defense contractor, we are bound by International Traffic in Arms Regulations (ITAR). Preferred Qualifications Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. AA degree in Electronic or Mechanical Technology, or equivalent knowledge through experience or other recognized educational institution. Working Conditions Working conditions are normal for a manufacturing environment. Manufacturing operations may require the use of safety equipment, including eye safety glasses, gowning, masks, hearing protectors, heel/wrist straps and any other required PPE. May be exposed to unusual environmental conditions such as loud noises, cold temperatures, confined spaces, dust or fumes. May require occasional travel to support customer. Flexible and willing to work overtime if necessary. Standing: approximately 20% of work time. Sitting: approximately 80% of work time. Lifting (in pounds): up to 35 pounds. Pushing (in pounds): up to 100 pounds. Mental/Visual: use of microscope and computer. Workspace: clean bench. Top Benefits As a team member at Crane Aerospace and Electronics, you’ll enjoy: Benefits: Health care, dental, vision, life and disability insurance starting the first day of the month following your start date. Time Off: 15 days of paid time off that start accruing the first day at Crane plus 12 paid holidays per year. 401(k) Retirement Plan: 401(k) plan with company match. Education Reimbursement: eligible after 6 months of employment. Salary Ranges for Electronics Technician Level II and III Electronics Technician Level II – $32.00 /hourly to $41.00 /hourly Electronics Technician Level III – $36.00 /hourly to $53.00 /hourly This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to be a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Crane Company is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status. #J-18808-Ljbffr Crane Company

Vacancy posted 21 hours ago
Similar jobs that could be interesting for youBased on the Electronics Technician Level (Electronic Assembly) in Burbank, CA vacancy
  •  ...Electronics Repair Technician Radwell International LLC | Production Full-Time | Hourly | On-site...  ...Key Responsibilities • Perform bench-level electronic and electro-mechanical repairs...  ...repair, electro-mechanical assembly, or industrial maintenance preferred... 
    Suggested
    Hourly pay
    Full time
    Temporary work
    Monday to Friday

    Radwell International

    Glendale, CA
    4 days ago
  • $25 - $28 per hour

     ...Junior Electronics Repair Technician Radwell International is seeking electronically inclined individuals...  ...Responsibilities Perform bench-level electronic repairs using...  ...electronics repair, PCB repair, electronics assembly, testing, quality, or related technical... 
    Suggested
    Hourly pay
    Full time
    Temporary work
    Immediate start
    Monday to Friday

    Radwell International

    Glendale, CA
    4 days ago
  • $30 - $53 per hour

     ...Salary ranges are determined by role, level, and location. The range displayed...  ...training. JOB DESCRIPTION As an Electronic Fabrication Technician III, you will be supporting the...  ...setup, printed wiring board electronic assembly, hand soldering, connector pin... 
    Suggested
    Full time
    Contract work
    For contractors
    Local area

    Columbus Technologies and Services Inc

    Pasadena, CA
    1 day ago
  • $26 - $34 per hour

     ...Established organization is seeking multiple Electronics Quality Technicians for levels I, II, and III on a direct hire basis in the greater West Los...  ...RESPONSIBILITIES Perform visual and functional inspection of PCB assemblies under magnification per IPC-J-STD 001 standards.... 
    Suggested
    Permanent employment
    Local area

    Ultimate Staffing

    Los Angeles, CA
    1 day ago
  • $22.85 - $67.33 per hour

     ...Job Description Job Description Electronic Fabrication Technician III in Pasadena, CA — $22.85–$67.33/hr DOE, 1st shift, temporary contract. Build high-reliability electronic assemblies for developmental and flight systems. THE BASICS Pay: $22.85–$67.33/hr, depending... 
    Suggested
    Weekly pay
    Full time
    Contract work
    Temporary work
    For contractors
    Local area
    Immediate start
    Shift work
    Day shift

    FLAG Solutions

    Pasadena, CA
    1 day ago
  •  ...Job Description Job Description Electronics Soldering Technician — PCB & LED Assemblies Based in Sun Valley/North Hollywood, CA, you’ll spend your days turning schematics into reliable hardware. Picture this: you start your shift by staging components, reviewing drawings... 
    Shift work

    Express Employment Professionals - North Hollywood

    Los Angeles, CA
    1 day ago
  •  ...Electronics Repair TechnicianETC, a global leader in innovative lighting and rigging technology...  ...a detail-oriented Electronics Repair Technician. This position is located in our Burbank...  ...to troubleshoot and repair from system-level to component-level. Our ideal candidate... 
    Work at office

    ETC

    Burbank, CA
    2 days ago
  • $32 - $53 per hour

    Crane Company is looking for an Electronics Technician II or III at their Burbank, CA facility. The role involves performing tests on electronic...  ...comprehensive benefits and salary ranges from $32 to $53 per hour based on expertise level. #J-18808-Ljbffr Crane Company
    Hourly pay

    Crane Company

    Burbank, CA
    21 hours ago
  • $35.2 - $37.4 per hour

     ...Basic manufacturing failure troubleshooting, understanding of electronic schematics, repair, and root cause analysis. Initial diagnosis...  ...support: building custom cables, electronics assemblies, and test fixtures. Production test station support: equipment... 
    Hourly pay
    Permanent employment

    Silvus Technologies

    Los Angeles, CA
    1 day ago
  • $29.12 - $31.2 per hour

     ...Keeping Our Heroes Connected THE OPPORTUNITY The Electronics Quality Technician-II reports to the Quality Supervisor on the Operations...  ...root cause analysis. Build and repair custom cable assemblies wiring harnesses and test fixtures. Maintain and calibrate... 
    Hourly pay
    Permanent employment
    Full time
    Relocation
    Monday to Friday
    Day shift

    Motorola Solutions

    Los Angeles, CA
    2 days ago
  • NEOTech in Los Angeles assembles electronic components and subassemblies on a production line using drawings, diagrams, and specifications. Work is performed under a magnified lens with small hand tools, soldering irons, and related equipment to build PCBs. Required are... 

    NEOTech

    Los Angeles, CA
    4 days ago
  • $32 - $45 per hour

     ...Job Description Job Description Electronics Maintenance Technician – 100% Travel Location: 100% Travel – Projects typically require six weeks...  ...equipment and voice communication systems to the component level. Install sensors, wiring, cabling, computers, radios,... 
    Hourly pay
    Contract work
    For contractors
    Work at office
    Local area
    Shift work

    System One

    Pasadena, CA
    5 hours ago
  • $38.5 - $40.7 per hour

     ...”? THE OPPORTUNITY The Senior Electronics Quality Technician II reports to the Quality Supervisor...  ...failed units, including complex PCB assemblies and radio frequency components. Own...  ...technical guidance to junior and senior-level technicians. Assist with prototype... 
    Permanent employment
    For contractors
    Monday to Friday

    Silvus Technologies

    Los Angeles, CA
    1 day ago
  •  ...Electronic Technician IiThe Electronic Technician Ii is responsible for performance verification, repair, diagnostics or calibration of electronic equipment. Performs modular and component level repairs, upgrades and product modifications using schematics, diagnostic... 
    Permanent employment
    Full time
    Local area
    Immediate start

    Electro Rent

    Van Nuys, CA
    1 day ago
  • $27 per hour

     ...Manufacturing Technician   JOB-10048016   Anticipated Start Date December 1, 2...  ...seeking a skilled and detail-oriented Electronic Technician to perform the setup, calibration...  ..., instruments, and mechanical assemblies.   Job Description Set up, calibrate... 
    Hourly pay
    Full time
    Contract work
    Monday to Friday
    Day shift

    Dynamics ATS

    Market, CA
    6 days ago
  •  ...With over 9,000 employees, our capabilities span electrical, electronic security, telecommunications, life safety, automation and controls...  ...industries.   We are seeking an Electronics Technician 3 to join our Security and Electronic Systems (SES) business... 
    Apprenticeship
    Work at office
    Local area
    Relocation

    M.C. Dean, Inc

    Los Angeles, CA
    1 day ago
  • $32 - $34 per hour

     ...Keeping Our Heroes Connected THE OPPORTUNITY The Electronics Quality Technician-III reports to the Quality Supervisor on the Operations...  ...Lead inspection and repair activities for complex PCB assemblies. Conduct root cause analysis and failure diagnostics using... 
    Hourly pay
    Permanent employment
    Full time
    Relocation
    Monday to Friday
    Day shift

    Motorola Solutions

    Los Angeles, CA
    3 days ago
  • $23 - $27 per hour

     ...Electronic Manufacturing Technician   JOB-10047794   Anticipated Start Date October 26, 2026   Location Sugar Land, TX   Type...  ...operations by performing technical duties related to mechanical assemblies, equipment, testing, troubleshooting, and production... 
    Hourly pay
    Full time
    Contract work
    Monday to Friday

    Dynamics ATS

    Market, CA
    a month ago
  • $20 - $49 per hour

     ...Electronics Technician - Install/Dispo 100% Travel | United States | Full-Time Job Description Electronics Technician Crown is seeking...  ...basic electrical wiring and connections Install and assemble equipment racks, cable trays, and electrical conduit Ensure... 
    Hourly pay
    Full time
    For contractors
    Work at office
    Local area
    Monday to Friday

    Crown Consulting, Inc.

    Los Angeles, CA
    1 day ago
  • M.C. Dean is seeking an Electronics Technician 3 to join the Security and Electronic Systems (SES) unit. The role supports design, integration, operation, and maintenance of electronic security services across federal, local, and commercial clients. Field responsibilities... 
    Local area

    M.C. Dean, Inc.

    Los Angeles, CA
    1 day ago
  • M.C. Dean is seeking an Electronics Technician 3 to join the Security and Electronic Systems (SES) unit. The role involves installing, maintaining, and testing electronic security systems for federal, local, and commercial customers, with opportunities to lead commissioning... 
    Local area

    M.C. Dean, Inc.

    Los Angeles, CA
    5 days ago
  • $35.2 - $37.4 per hour

    Silvus Technologies is seeking a Manufacturing Technician in Los Angeles, California. The ideal candidate will have at least 5-6 years of experience in an electronics work environment and skills in hand soldering SMT components. Responsibilities include troubleshooting... 
    Hourly pay

    Silvus Technologies

    Los Angeles, CA
    1 day ago
  •  ...weather radar, autopilot, compass systems, and accessories component level. Uses all mandated safety equipment and complies with all...  .... Test and troubleshoot instruments, components, and assemblies, using circuit testers, or voltmeters. Keep and maintain records... 
    Full time
    Temporary work
    Part time
    Local area
    Flexible hours
    Night shift
    3 days per week

    FEAM Aero

    Los Angeles, CA
    2 days ago
  • $27 - $32.5 per hour

     ...Avionics Technician Level I The Avionics Technician Level I assists with and while under supervision performs inspections, troubleshooting, repair, and installation of aircraft instrument and avionics components and systems in accordance with manufacturer specifications... 
    Hourly pay
    Temporary work
    Immediate start

    Vista America

    Van Nuys, CA
    2 days ago
  • $35 - $52 per hour

    Avionics Development Technician (Test Racks) Lead HITL test asset development...  ...flown, unlocking performance levels previously out of reach...  ...of load simulators Assemble production test racks for HITL...  ...assembling, integrating, and testing electronic hardware in the aerospace... 
    Hourly pay
    Permanent employment
    Shift work
    Weekend work

    K2 Space

    Los Angeles, CA
    5 days ago
  • $13.2 - $19.8 per hour

     ...Bridgestone Retail Operations (BSRO) is hiring a Maintenance Technician for Firestone Complete Auto Care. This entry-level role supports a high-performing team servicing vehicles, with full and part-time benefits from day one. Pay range is $13.20–$19.80 per hour, and... 
    Hourly pay
    Full time
    Part time

    Bridgestone Americas

    Glendale, CA
    3 days ago
  • $17 - $19 per hour

     ...Mid-Level Automotive Technician Make the Move to Advance Your Automotive Career! We Offer ASE Certification/Training & A Proven Path for Advancement! - Join our Team Today! Let's Connect Starting Pay:$17 -$19 Hourly (DOE) + Weekly Pay & Incentives We Welcome Walk In... 
    Hourly pay
    Weekly pay
    Immediate start
    Shift work

    Goodyear Tire & Rubber

    Glendale, CA
    2 days ago
  • $33 per hour

     ...Job Description Job Title: Electrical Technician III Location: Northridge CA 91325...  ...Job Description: Knowledge of basic electronic components and component functionality....  ...electronic schematics, engineering drawings (assembly, layout, and PCB artwork) and written... 

    Lancesoft INC

    Los Angeles, CA
    6 days ago
  • $75k - $90k

     ...Inc. is on the lookout for a Robotics Technician to join our growing team. In this role,...  ...US and Canada. RESPONSIBILITIES Assembling robotic systems and components according...  ...diagnostic skills with mechanical and electronic systems. Ability to read and interpret... 
    Flexible hours
    Shift work

    Sorting Robotics

    Los Angeles, CA
    1 day ago
  • $39 - $55 per hour

     ...teams design, manufacture, and assemble advanced systems for some of...  ...1pm Purpose The Robotic Technician is a core production role...  ...our pay range is based on the level of the job. For this role,...  ...E-Verify is a program that electronically confirms a candidate's eligibility... 
    Full time
    Temporary work
    Casual work
    Work at office
    Immediate start
    Shift work
    Night shift

    Divergent

    Los Angeles, CA
    1 day ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Electronics Technician Level (Electronic Assembly). Be the first to apply!