CNC Milling Operator 2
ERA Industries
Position Summary The CNC Milling Operator 2 is a mid-level CNC milling operator capable of running established milling jobs with moderate independence. This position requires intermediate inspection ability, general GD&T understanding, and the ability to make tool wear offsets. This role is for operators who can maintain production, monitor part quality, and assist with basic tooling or process issues on proven jobs. Key Responsibilities Operate CNC milling machines (3 axis, 4 axis, 4 axis horizontal, and 5 axis) on established jobs with limited supervision. Load and unload parts. Follow documented work instructions, inspection plans, and traveler requirements. Perform basic part cleaning, deburring, and packaging as required. Intermediate understanding of precision measurement tools and techniques as instructed including but not limited to calipers, micrometers, go/no-go gauges, etc. Make basic wear-offset adjustments as required and perform routine tooling changes as outlined by procedures. Identify worn or broken tooling and notify supervisor. Identify process variation and notify setup machinists or supervision before producing nonconforming parts. Identify and elevate to supervisor obvious part defects, tool issues, machine alarms, or process abnormalities. Accurately record job data and labor in the ERP system and required paperwork, including but not limited to proper part counts, lot control, labor time, and quality data. Independently keep work area clean, organized, and safe. Maintain production efficiency and quality standards. Adhere to company policies and procedures including but not limited to guidelines related to safety, quality, ethics, and attendance. Physical Requirements Prolonged periods of performing repetitive actions that entail using fine and gross motor skills, bending, and stooping. Ability to stand for extended periods. Ability to lift parts/materials with a minimum of 50 pounds at a time. Visual acuity to read instructions, operate machines, and inspect parts produced. Decision Authority Will operate established jobs independently. Must make approved wear-offset adjustments within documented limits. Must replace simple tooling when trained and authorized. Will not perform full independent setups. Will not make program edits. Education and Experience High school diploma, equivalent diploma, or GED required. This position involves access to export-controlled information and/or items. To be eligible, applicants must be legally authorized to work in the United States and must be able to perform all job duties in compliance with U.S. export control laws and regulations without current or future employer-sponsored export authorization. Requirements Minimum 1 – 3 years of precision CNC milling machining experience preferred. Intermediate mechanical aptitude and hand tool abilities. Intermediate blueprint knowledge required and basic GD&T interpretation. Demonstrated proficiency with a variety of precision measurement tools and methods. Willingness to train precision CNC milling operations, shop math, and inspection methods. Ability to recognize tool wear, poor finish, chatter, burrs, and obvious dimensional drift. Strong written and verbal communication skills with setup machinists, leads, quality, and supervision. #J-18808-Ljbffr
- ...Job Description Job Description CNC Lathe Machinist – Large Aerospace Components | 1st & 2nd Shift Joined Alloys | Phoenix, AZ... ...: Evening/Night Shift About Joined Alloys Joined Alloys, operated by Leading Edge Manufacturing LLC and part of TASE Global, has a...SuggestedTemporary workLocal areaImmediate startShift workNight shiftDay shiftAfternoon shift
$28 - $38 per hour
...CNC Lathe MachinistLegacy Talent Search is currently seeking candidates for a CNC Lathe... ...manufacturing process.Key Responsibilities:Set up, operate, and monitor CNC lathe machines to produce... ...in machining preferred.Minimum of 2 years of CNC lathe machining experience preferred...SuggestedHourly payAfternoon shift$32 - $38 per hour
...CNC Machinist Legacy Talent Search is currently seeking candidates for a CNC Machinist... ...Key Responsibilities: Set up, operate, and monitor CNC mills and/or lathes to produce precision... ...certification is a plus. Minimum of 2+ years of CNC machining experience in...SuggestedHourly payShift work$28 - $40 per hour
...CNC Lathe Setup MachinistWell-established and busy precision machining company in Tempe... ...process control. This is not an entry-level CNC operator position and is not intended for someone... ...-On Bonus | No Mandatory OvertimeTempe, Arizona | Monday–Friday | 6:00 AM–2:30 PM...SuggestedHourly payRelocation packageMonday to Friday- ...CNC Mill Machinist / Setup 2nd SHIFT in North Phoenix area. (3:30PM- 2:00AM) MON-THU As a Machinist / Computer Numerical Control (CNC) Mill Technician you will shape... ...and set up the correct sequence of machine operations in accordance with blueprints, layouts or other...SuggestedPermanent employmentLocal areaAfternoon shift
$20 - $35 per hour
...Job Description Job Description CNC Mill & Lathe Machinists Hiring Immediately for various... ...: CNC Mill & Lathe Machinists (Set-Up & Operate) Join a company that recognizes... ...workspace. What We’re Looking For: ~2+ years of experience operating CNC Mills...Weekly payFull timeContract workImmediate startFlexible hoursShift workNight shiftWeekend work$56.16k - $83.2k
...Job Title: CNC Machinist Job Description This role focuses on setting up, programming, and operating CNC lathes and mills to produce precision components with minimal supervision. You will... ...CNC machining experience for Level 2 CNC roles. ~5 or more years of demonstrated...Weekly payPermanent employmentFull timeShift workWeekend work3 days per week- ...CNC Mill Machinist (2nd & Weekend Shift) Location: Phoenix, AZ Hours: 3:30 PM - 2:00 AM (Monday - Thursday) 6:00am - 6:30pm (Fri-Sun) 6:00am-10:00am Monday Training... ...execute the correct sequence of machine operations based on blueprints, layouts, or other...Permanent employmentLocal areaWeekend workDay shiftAfternoon shift
$38 per hour
...and 2nd DESCRIPTION: The CNC Machinist will perform accurate... ...timely set-ups utilizing CNC mill or lathe machining centers. Proficient... ...DUTIES: Setup and operate CNC lathe or mill for... ...manufacturing environment; OR, ~2 years CNC experience in a manufacturing...Temporary workFlexible hoursShift workAfternoon shift$38 per hour
...Job Description Job Description CNC Machinist I-IV Phoenix, AZ | 2635 E. Magnolia... ...What You'll Do Set up and operate CNC mills and/or lathes Perform machine changeovers... ...inspections Level II CNC Machinist ~2+ years of CNC machining experience ~ Ability...Temporary workMonday to FridayFlexible hoursShift workDay shiftAfternoon shift- ...CNC - 2nd ShiftMachine ShopReports To: Machine Shop SupervisorDuties... ...may be assigned.Setup and operate all CNC machining centers.Observes... ...and operates CNC Lathes and CNC Mills under minimal supervision,... ...shop using similar equipment. 0-2 years of demonstrated experience...Afternoon shift
$30 per hour
...Job Position: CNC Operator Location: PHOENIX, AZ 85027 Pay Rate: $30.00/hr Shift: 2nd... ...Experience CNC Operators Needed CNC Lathe and Milling Machinist in the NORTH Valley... ...Proven experience as a CNC operator • 2 years set up and operation of CNC equipment...Shift workDay shiftAfternoon shift- ...CNC Machinist positions - Experience required! (Aerospace & Defense... ...20.15. RESPONSIBILITIES: Operate CNC machines without oversight... ...(inserts, boring bars, end mills, drills, etc.) Ability to read... ...clocking in and out of jobs, etc. ~2 - 5 years of experience...Permanent employmentFor subcontractorShift workNight shiftDay shift
$30 - $35 per hour
...Your Job As a CNC Machinist in our CNC manufacturing... ...role supports seamless machine operation, vigilant quality checks, and... ...to 3:40pm Monday - Thursday 2 nd Shift: 3:30pm to 2am Monday... ...Experience working with CNC milling machinery Experience reading...Hourly payFlexible hoursShift workWeekend workAfternoon shift- ...Positions We are seeking seasoned CNC Machinists with at least 5... ...-Time (Saturday & Sunday 6am-2:30pm) Day Shift Night... ...The CNC Machinist sets up and operates computer numerically controlled... ...are met. CNC Lathe or CNC Mill Positions: Operate CNC Mill...Permanent employmentFull timePart timeFor subcontractorShift workNight shiftWeekend workDay shift
- ...Description Looking for a journeyman machinist who can operate most machines located in a job shop environment. Lathes, Mills, CNC Tooling Centers (Hurco), and CNC Lathes. We... ...over 30 years of manufacturing. Hours are 6am -2:30pm, Mon-Fri. A low stress work...
- ...CNC Lathe Machinists Aerospace & Defense Manufacturing Location: 3617 E La Salle... ...5. RESPONSIBILITIES: Setup & operate to produce high precision aerospace components... ...independently and stay on task - operate 2 machines regularly Ability to problem...Permanent employmentFull timePart timeFor subcontractorShift workNight shiftWeekend workDay shift
$25 - $40 per hour
...CNC Lathe OperatorLocation: Phoenix AZ Pay: $25.00 - $40.00 per hour, DOE Schedule: Monday - Friday1st Shift: 6:00 AM - 2:30 PM2nd Shift: 2:00 PM - 10:30 PMAbout the CompanyWe are a leading... ...are seeking an experienced CNC Lathe Operator who is more than just a machine operator...Hourly payMonday to FridayShift work- ...machine. • At least 5-years’ experience working on CNC machines. Duties & expectations: • Operate CNC machine in a manner that is safe, producing... ...area clean and organized. • Change inserts, drills, mills and other tools. • Help set-up person in loading of...Immediate startAfternoon shift
- ...Job Description Job Description Multiple positions for CNC Lathe/Mill Set Up/Operator. Looking to hire ASAP This is a 1st shift position, working 40-50 hours per week with occasional Saturdays. Normal working hours are Mon-Fri 7 am to 3:30 pm. Hours could be adjusted...Immediate startShift workDay shift
- ...industries. Our mission is to provide superior quality through innovation, advanced CNC machining processes, and a relentless focus on continuous improvement. At Masterbilt, we operate in a collaborative, fast-paced environment where teamwork and innovation drive...Monday to FridayNight shiftAfternoon shift
- Aerotek - - Responsibilities: Set up and operate CNC lathes and mills; Generate and edit CNC programs using CAM software; Inspect parts with calipers and micrometers; Read blueprints and instructions in English; Maintain 5S, clean and safe workspace
$45.8k - $82.4k
....00 To $82,400.00 Annually Location: Phoenix, AZ Phone: (***) ***-**** Website: We are hiring a CNC Machinist with experience in setup, operation, and editing of CNC mills and/or lathes. The ideal candidate is comfortable working with tight tolerances, large parts, and...$25 - $30 per hour
...CNC Machine OperatorProCraft Cabinetry Phoenix is seeking a skilled and dependable CNC Machine Operator with experience operating edge banding machinery. The ideal candidate will understand... ...skills.Minimum Qualifications:2 + years of CNC machining/programming experience...Full timeMonday to FridayShift work$27 - $35 per day
...CNC Setup/ProgrammerPhoenix, Arizona, United StatesJob Title: CNC Mill & Lathe Setup/Operator/ProgrammerLocation: Phoenix, AZJob Type: Full-Time | Direct HireShift: Day/SwingPay: $27 -$35Job SummaryWe are seeking a skilled CNC Setup/Operator/Programmer with experience...Full time- ...Join our team as the CNC Programmer and take full ownership of developing safe, repeatable... .... Reporting to the engineering and operations leadership team, you will translate customer... ...who has experience in multi-axis milling or CNC turning within a precision, regulated...
- ...CNC Lathe Machinist Opportunity Come join a leading aerospace manufacturer in Phoenix! We have opportunities available across all shifts for CNC Lathe Machinists with machine operation and setup experience. Programming is not required. Responsibilities Load...All shifts
- ...support to clients. You will provide technical and operation training, test, adjust, trouble-shoot, repair, rebuild and install CNC (Computer Numerical Control) machining... ...improvement. What you will bring Minimum of 2-5 years’ working experience in a Machine Tool...Temporary workWork experience placementNight shift
- ...CNC Swiss Operator/Setup My client has an immediate 2nd shift CNC Swiss Operator/Setup position available. Job duties include but not limited to: Setting up CNC Swiss machines. Reading/interpreting specifications on work orders, drawings, and inspection...Immediate startAfternoon shift
- ...Job Description Job Description Produce machined parts by programming, setting up, and operating a computer numerical control (CNC) machine, knowledge of Haas vertical machining centers & controls is a plus; maintaining quality and safety standards; maintaining equipment...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to CNC Milling Operator 2. Be the first to apply!


