Welder - Manufacturing
DEPARTMENT OF THE NAVY HEADQUARTERS
Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in the Structural Shop (Shop 26). Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help
Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard : ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
- You will perform reviews of documents associated with completed work and trade processes.
- You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.
- You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.
- You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.
- You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.
- You will serve as an Expert Welder leading a group to ensure work assignments are completed.
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- This is a bargaining unit position.
- You will be required to successfully complete a pre-appointment physical examination.
- This position requires the ability to lift and carry items weighing 50 pounds.
- Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
- Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.
- This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
- This position requires rotating shift work.
- Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.
- Must maintain visual inspection qualifications per VT-271.
Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard : ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Vacancy posted 4 days ago
Similar jobs that could be interesting for youBased on the Welder - Manufacturing in Willingboro, NJ vacancy
- ...Summary You will serve as a WELDER LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance...SuggestedPermanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
- ...Welder (2nd Shift)Pay: $33-37.50/hr.Shift: 3:30pm to 12am (Mon-Fri)DescriptionCannonball Recruiting is seeking experienced Welders... ...NJ.RequirementsMinimum of 4+ years of welding experience in a manufacturing environmentMust attain the ability to weld manual, semi-automatic...SuggestedShift workAfternoon shift
- ...related to welding, including basic trouble shooting and maintaining welding equipment to assure a safe and efficient operation Welder must proficiently demonstrate welding ability through performance, and testing as determined by vessel project and classification...SuggestedFull timeWork experience placementFlexible hours
- Welding PositionStitch weld, full weld components and assemblies with GMAW process. Knowledge of oxy/acetylene and plasma cutter use a plus. Must be able to read tape measure and basic print reading. Will also use basic hand tools and grinder at times.This position reports...SuggestedFull timeRemote work
$25 - $35 per hour
...Welder (2nd Shift) Pay: $25-35/hr (depends on experience level) ~$2/hr shift differential for 2nd shift hours worked 2nd Shift: Mon-Thu (3p-3a); optional OT on Fri (3p-9p) Description: ~ Cannonball Recruiting is seeking a highly skilled and...SuggestedWeekly payTemporary workShift workAfternoon shift- ...Overview: 2nd Shift Welder: 3 PM - 12:30 AM Join our dynamic team as a Welder and bring precision, skill, and craftsmanship to essential construction and manufacturing projects. In this role, you will be responsible for fabricating, assembling, and installing metal...Afternoon shift
- ...or to fill holes, indentations, or seams of fabricated metal products. Qualifications Demonstrated experience as a professional welder. Ability to strictly adhere to all safety standards. Demonstrated ability to accept and follow instructions from others. Willingness...Work at office
- Overview DC Fabricators (DCF) is seeking a talented Welder to join our team. This is an on-site position reporting to our manufacturing facility in Florence, NJ. Shifts may vary depending on company needs. At DCF, you’ll be part of a skilled team that delivers high-quality...Work at officeFlexible hoursShift work
- Summary You will serve as a PIPEFITTER LEADER (EXPERT) in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. ...Permanent employmentFull timeTemporary workPart timeInterim roleCasual workWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shiftRotating shift
- MCR Services, Inc. seeks a skilled welder to join our shop team. You will use hand-welding or flame-cutting equipment to weld or join metal components and fill holes, indentations, or seams in fabricated metal products. The role requires adherence to safety standards,...
- Job Description Job Description Description Reporting to the Director of Construction and field supervisor as applicable, this role will install industrial refrigeration systems at various locations around the country. Key Responsibilities Maintain a positive...Temporary workApprenticeshipFlexible hours
- Job Description Job Description Description What You’ll Do There’s no such thing as a dull day when you are installing industrial refrigeration systems. Under the direction of the Field Supervisor, you’ll be consulting blueprints, work orders, and schematics...Weekly payTemporary workFlexible hours
- ...department per IIAR piping standards. This person will report to the Director of Construction and manage and support other pipefitters and welders on the crew to install systems. Job Type Full-time Key Responsibilities Consult blueprints, work orders, schematics, or...Full timeTemporary workFor subcontractorFlexible hours
- ...Fabricators (DCF) is seeking a talented Fitter/Fabricator (2nd Shift) to join our team. This is an on-site position reporting to our manufacturing facility in Florence, NJ. The hours for this position are 3:30 PM - 12:00 AM. At DCF, you’ll be part of a skilled team that...Work at officeFlexible hoursAfternoon shift
- ...Job Description Job Description Responsible for the manufacture of hydraulic machinery from drawings. Must be capable of performing the following duties: Read hydraulic and electrical circuit and general arrangement drawings. Understand a bill of material and...
- ...Job Description Job Description We are currently seeking qualified Mechanics and Welders for a busy metals recycling facility. Candidates must have prior experience in the skilled trades industry and be comfortable working in a fast?paced environment. Schedule •...Monday to FridayShift work
$23 - $28 per hour
Bentley Truck Services, Inc. Bentley Truck Services, Inc. has been family owned and operated since 1991. Starting as a small 2 bay shop in Philadelphia, we now span the entire eastern seaboard with 11 state of the art locations offering commercial truck sales, commercial...Contract workLocal area$28 - $34 per hour
Bentley Truck Services Bentley Truck Services, Inc. has been family owned and operated since 1991. Starting as a small 2 bay shop in Philadelphia, we now span the entire eastern seaboard with 11 state of the art locations offering commercial truck sales, commercial ...Contract workLocal area- Job Description Job Description Description What You’ll Do As an experienced Pipefitter and Field Supervisor you have a pretty good feel for what a day in the life is like. You’ll be consulting blueprints, work orders, and schematics to install industrial refrigeration...Weekly payTemporary workFor subcontractorFlexible hours
- Job Description Job Description NOW HIRING — AUTO & TRUCK BODY REPAIR TECHNICIAN / FABRICATOR Scrappy’s Auto Service is expanding our team and looking for an experienced Auto & Truck Body Repair Technician / Fabricator to join our growing operation in Langhorne...Immediate start
- DC Fabricators is seeking a skilled Fitter/Fabricator for the 2nd shift (3:30 PM - 12:00 AM) at our Florence, NJ facility. This on-site role requires at least three years of fabrication experience, ability to read blueprints, and proficiency with welding and fabrication...Afternoon shift
- ...PA 19020: Relocate before starting work (Required) Policy Must be drug free. Why TC Millwork Join a large store fixture manufacturer where your craft is valued and your voice matters. As an employee-owner, you help shape our quality, our culture, and our future...Full timeRelocation
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Welder - Manufacturing. Be the first to apply!
Related searches
- tool manufacturing Willingboro, NJ
- manufacturing lead Willingboro, NJ
- quality manufacturing Willingboro, NJ
- fabrication technician Willingboro, NJ
- manufacturing team lead Willingboro, NJ
- custom fabrication Willingboro, NJ
- medical manufacturing Willingboro, NJ
- manufacturing production Willingboro, NJ
- industrial manufacturing Willingboro, NJ
- manufacturing Willingboro, NJ


