Pilot in Command (Fixed Wing) - Anchorage, Alaska

Fixed Wing Pilot In Command (Pic)Tyonek Services Group, Inc is seeking a Fixed Wing Pilot In Command (PIC) as part of the in-house flight department. This position with Tyonek will be in support of an operational mixed fleet of fixed-wing and rotor helicopters under 14 CFR Part 135 and Part 91 in support of executive transport, crew changes, surveillance, and offshore logistics.This position is based in Alaska.Duties:The Pilot-in-Command (PIC) is accountable for the safe conduct of assigned flights. The PIC is responsible for the operation, safety, and security of the aircraft and the safety of all crew members, passengers, and cargo on board. Specific duties and responsibilities include:Pre-flightPrior to initiating a flight or a series of flights, ensuring the aircraft is equipped with all required systems and components for its assigned operationsEnsuring the aircraft pre-flight inspection is completed as per the aircraft flight manual before each departureEnsuring safe operation of flight assignments in accordance with 14 CFR Regulations, this manual, Ops Specs, and Company SOP'sEnsuring that a flight will not commence if a flight crew member is incapacitated from performing duties by any cause such as injury, sickness, fatigue, or the effects of any psychoactive substanceEnsuring that the flight will not be continued beyond the nearest suitable aerodrome or heliport, when a flight crew member's capacity to perform functions is significantly reduced by impairment of faculties from causes such as fatigue, sickness, or lack of oxygenChecking and assessing weather and all applicable FAA NOTAMs when available. As soon as possible, report to the appropriate air traffic services (ATS) unit any hazardous weather or flight conditions encountered that are likely to affect the safety of other aircraftPromoting fundamental Crew Resource Management (CRM) when working with other pilots and station personnelParticipating in Operational Control tasksEnsures communication with maintenance regarding any discrepancies. If maintenance personnel are not immediately available a notification shall be made via phone to the Lead Mechanic or Director of MaintenanceMaintaining currency with certification and flight experience, (i.e., medical certificates, check rides, recency of experience, etc.)Maintains familiarity with Company Compliance DocumentsResponsible for registering in Pilot Record Database (PRD) and listing Grasshopper Aviation LLC as a current employer in accordance with 14 CFR §111.1(b)(8)Ensuring that the aircraft is airworthy, duly registered, and that the documentation and operational information are onboard the aircraftEnsuring that fueling and oil operations are supervised and meet requirementsEnsuring that all flight planning requirements have been metEnsuring that carriage of HazMat is packaged and stowed I/A/W 49 CFR 100-177 and accompanying paperwork is complete and signedBriefing the passengers in accordance with the requirements specified in FAR Part 135 and Keeping passengers informed of flight status whenever delays occurSafety of all passengers, cargo, aircraft, and assigned SIC's when executing a flight assignmentChecking in passengers and assisting with passenger comfortParticipating in the safety management systemSecurity of cargo and baggage loads and of the aircraft during its operationResponsibility for operational control as outlined in GOM 2.4Maintain communication with Logistics regarding scheduling, routing, passengers, and loads. Communication may be via phone, email, text, or radio,Operating the aircraft in accordance with Company SOP'sNotifying the nearest appropriate authority by the quickest available means of any accident involving the aircraft, resulting in serious injury or death of any person or substantial damage to the aircraft or propertySubmitting a report to the designated local authority following an act of unlawful interference;Post FlightKeeping all assigned documents and manuals up to dateConfirm accurate and signoff weight and balanceCompletion and maintenance of the aircraft flight and duty logbookEnsure that flight times are confirmed after each flight or at end of dayCompleting all post-flight duties as specified in the company operations manual, recording flight times and aircraft defectsOther duties may be assigned*Delegation of Duties: The PIC's duties are delegated to the Second in Command (SIC) only if the PIC becomes incapacitated during flight.Education/Experience Requirements:Must have a high school diploma or GEDBe qualified in accordance with 135.243Multi-engine ratingPossess a valid FAA ATP Certificate, A type rating, if requiredHold a valid FAA first class medical certificateTwin Otter experience preferredHave at least 3,000 hours flight time1,000 hours flight time as Turbine Pilot in CommandWe maintain a drug-free workplace and perform post offer, pre-employment substance abuse testingUS Citizenship is requiredPhysical Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills, and/or abilities required. Reasonable accommodation may be provided to enable individuals with disabilities to perform essential job functions.Must possess physical dexterity and coordination to qualify for Federal Aviation Administration Commercial Pilot CertificateMust be able to walk and stand on level and/or inclined surfaces for up to twelve (12) hours per day and sit for up to eight (8) hours per dayMust be able to perform non-rated crewmember duties during mission operationsMust be able to distinguish color and judge three-dimensional depthMust be able to climb stairsMust be able to read and interpret newspaper and typewritten print, maps, aeronautical charts, and weather chartsMust be able to grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shouldersMust be able to see aircraft in flight, read dials/gauges, identify small objects and hand toolsMust meet or exceed Federal Aviation Administration minimum visual acuity and hearing standards for first class medical certificate.Must be physically capable of climbing vertical ladders or built-in aircraft steps to heights of 10-12 feetMay be exposed to chemical mist, gas, vapors, ultra-violet, and infrared radiationMay be required to lift up to 70 pounds to a height of four (4) feet and be required to lift up to 20 pounds to a height of seven (7) feetMay be exposed to certain obstructions on the surface as well as ladders, stairs, etc.May be exposed to rapid or extreme temperature changesWork Schedule will be 7 days on and 7 days offWilling to travel up to 25%Equal Opportunity Employer / VEVRAA / ADATNC and its subsidiaries fall under ANCSA and are entitled under Federal Law to extend hiring preferences to its shareholders. ANCSA provides TNC the authority to give shareholder preference in hiring. TNC reaffirms its belief in equal employment opportunities for all employees and applicants for employment. Tyonek is an Equal Employment Opportunity Employer and a VEVRAA governed Federal Contractor who affords equal employment opportunity to protected veterans and people with disabilities. TNC provides all employees and job applicants equal employment opportunities in hiring and promotion without regard to age, sex, sexual orientation, marital status, race, religion, color, veteran status, genetic information, physical or mental disability, national origin or any other reason prohibited by law.