CNC Lathe Machinist
$28 - $35 per hourMASON ELECTRIC CO
CNC Lathe Machinist Mason welcomes people who share our determination and high standards to join us in doing work that moves the world forward. We design, manufacture, and market highly engineered products and systems principally for the aerospace and defense markets. Mason, a wholly-owned subsidiary of Transdigm, offers world-class control devices and subsystems - such as control grips, throttles, HaWC controllers, and communications interfaces - for today's advanced cockpits, military vehicles, and other specialized applications. Our solutions fall into two broad categories: control products and components. Title:
Machinist
Job Family:
Operations
Reports to:
Production Manager
FLSA Status
Non Exempt
EEOC Class:
Craft Worker Summary
Sets up, Operates and inspects CNC Lathes (Star Swiss) Inspects and measures work to assure conformance to prescribed tolerances and standards. Use shop math including trigonometry as required. Ability to trouble shoot. adjust/ modify programs will also be required. Running up to three machines at a time (5+axes) Position Duties
Essential functions of the position include, but are not limited to:
College or technical training or equivalent in experience. Physical Demands
This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a US person as: any individual who is granted U.S. citizenship; or. any individual who is granted U.S. permanent residence ("Green Card" holder); or. any individual who is granted status as a "protected person" under 8 U.S.C 1324b(a)(3).
Mason prohibits discrimination or harassment based on the following categories: race, color, religion, religious creed (including religious dress and grooming practices), national origin, ancestry, citizenship, physical or mental disability, medical condition (including cancer and genetic characteristics), genetic information, marital status, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender, gender identity, gender expression, age (40 years and over), sexual orientation, veteran and/or military status, protected medical leaves (requesting or approved for leave under the Family and Medical Leave Act or the California Family Rights Act), domestic violence victim status, political affiliation, and any other status protected by state or federal law.
Machinist
Job Family:
Operations
Reports to:
Production Manager
FLSA Status
Non Exempt
EEOC Class:
Craft Worker Summary
Sets up, Operates and inspects CNC Lathes (Star Swiss) Inspects and measures work to assure conformance to prescribed tolerances and standards. Use shop math including trigonometry as required. Ability to trouble shoot. adjust/ modify programs will also be required. Running up to three machines at a time (5+axes) Position Duties
Essential functions of the position include, but are not limited to:
- Perform work assigned by department lead or supervisor.
- Studies blueprints, drawings, sketches or sample part to determine dimensions and tolerances of finished part, sequence of operations and set up requirements.
- Perform the work described on bill of operations for your department and/ or section.
- Performs multiple set ups and operations to produce parts on a production basis.
- Perform all work shown on the drawing and described in the notes that is applicable to your section and/or department. If the work order is unclear, refer to the detailed manufacturing instructions for visual purposes.
- Selects, aligns, and secures holding fixtures, cutting tools, attachments, materials and accessories on machining equipment. Calculates and sets controls to regulate machining operations.
- All work performed must meet the blueprint specifications. Verifies finished parts for conformance to specifications.
- Maintain the highest ethical standards, even when challenged from above
- Understand and live by Mason's ethics and business conduct policies
- Other duties may be assigned
- Read and interpret blueprints and drawings.
- Setup mills and lathes Experience
- basic programming experience
- Must have basic knowledge of fixture use.
- Experience establishing speeds and feed rates
- 5 plus years of experience in a manufacturing environment.
College or technical training or equivalent in experience. Physical Demands
- While performing the duties of this Job, the employee is regularly required to sit for long periods and stand to perform work.
- The employee is required to reach with hands and arms and talk or hear.
- The employee must be able to lift, push, pull or move up to fifty (50) pounds or more with assistance.
- Specific vision abilities required by this job include close vision, color vision, peripheral vision and ability to adjust focus.
- Safety glasses, shop coat/apron, proper shoes.
- Occasional exposure to shop element such as noise, dust, odors and fumes.
This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a US person as: any individual who is granted U.S. citizenship; or. any individual who is granted U.S. permanent residence ("Green Card" holder); or. any individual who is granted status as a "protected person" under 8 U.S.C 1324b(a)(3).
Mason prohibits discrimination or harassment based on the following categories: race, color, religion, religious creed (including religious dress and grooming practices), national origin, ancestry, citizenship, physical or mental disability, medical condition (including cancer and genetic characteristics), genetic information, marital status, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender, gender identity, gender expression, age (40 years and over), sexual orientation, veteran and/or military status, protected medical leaves (requesting or approved for leave under the Family and Medical Leave Act or the California Family Rights Act), domestic violence victim status, political affiliation, and any other status protected by state or federal law.
Vacancy posted 5 days ago
Similar jobs that could be interesting for youBased on the CNC Lathe Machinist in Sylmar, CA vacancy
$21 - $30 per hour
...CNC Lathe Machinist - Valencia, CA 2nd Shift (3:00 PM - 11:30 PM) | OT as needed $21-$30/hr DOE Overview: Seeking an experienced CNC Lathe Machinist to machine aerospace landing gear components. This role requires strong setup/operation skills, blueprint...SuggestedPermanent employmentAfternoon shiftKey Skilled Personnel
Santa Clarita, CA7 days ago$35 per hour
...leader in the aerospace & defense, outer space, and power generation industries. We have immediate openings for experienced CNC Lathe Machinists . Both 1st and 2nd shift schedules are available. To be considered CNC Machinists must have 5 or more years of Aerospace industry...SuggestedHourly payPermanent employmentImmediate startDay shiftAfternoon shiftPrinceton Tool
Santa Clarita, CA5 days ago- ...Hollywood! G&H Precision Inc. is a reputable manufacturing company located in North Hollywood, California. We are currently look for a CNC Lathe Programmer / SET UP MAN . We are looking for a strong candidate with significant experience who can handle close tolerances and...Suggested
G&H Precision Inc.
San Fernando, CA14 days ago $35 - $45 per hour
...certified and ITAR registered. We are seeking an experienced Senior CNC Machinist/Programmer to join our team on a full-time basis. Position:... ...Valencia, CA 91355 Responsibilities: • Set up and operate CNC lathes and mills (3, 4, and 5-axis) • Program parts from scratch...SuggestedHourly payFull timeMonday to FridayDay shiftH&H Machining
Santa Clarita, CA6 days ago$23 - $28 per hour
...Summary Responsible for all aspects of the CNC Lathe operation in the production of precision aerospace components. Job Duties and Responsibilities Other tasks and duties may be required as directed. Set-up, adjust and write programs for CNC Multi...SuggestedHourly payPermanent employmentFull timeFor subcontractorCasual workWork at officeFlexible hoursShift workNight shiftCrissair
Valencia, CA5 days ago$25 - $38 per hour
...Job Description Job Description Job Title: CNC Lathe Machinist Job Description This role focuses on operating and setting up CNC lathes to machine precision aerospace components, ensuring high-quality output and adherence to tight tolerances in a production environment...Weekly payContract workTemporary workWork at officeShift workDay shiftAfternoon shiftAerotek
Valencia, CA13 days ago- ...CNC Lathe Operator M.S. Aerospace Inc. (MSA) is an aerospace manufacturer of high strength specialty fasteners, including bolts, screws, studs, and pins. Our products are of the highest quality and very close tolerances. Our products support the US Government, including...Full timeMonday to FridayShift workDay shift
MS Aerospace
Sylmar, CA6 days ago $28 - $35 per hour
...Machinist - CNC Mills Machinist Mason welcomes people who share our determination and high standards to join us in doing work that moves... ...Sets up & operates on a production basis machines such as lathes, CNC mills, swiss, etc. Able to setup milling or lathe machines...Permanent employmentMASON ELECTRIC CO
Sylmar, CA5 days ago$20 - $40 per hour
...Job Description Job Description Hiring ASAP for CNC Machinists! Description: You will be setting up CNC mill or lathe machines to manufacture components for the aerospace & defense industry. Skills & Qualifications: ~ CNC machining experience ~5 - 10+ years...Weekly payContract workTemporary workWork at officeImmediate startAerotek
San Fernando, CA2 days ago$22 - $30 per hour
...Build your future with Volt! Volt is immediately hiring for a CNC Lathe Operator - 2nd Shift in the greater Valencia, CA area . As a CNC Lathe Operator, you will: Set up and operate CNC lathe machines to manufacture precision components to...Hourly payFull timeTemporary workWork experience placementImmediate startShift workDay shiftAfternoon shiftVolt
Valencia, CA4 days ago- ...Job Description Job Description A CNC Lathe Operator is responsible for setting up and operating computer numerical control (CNC) lathes to produce precision metal parts and components. This role requires interpreting technical drawings, conducting machine maintenance...
Sourcing HR Solutions
Valencia, CA8 days ago $24.87 - $31.74 per hour
...Set up and operate conventional (manual) lathes and milling machines Machine parts to blueprint... ...geometry, and basic trigonometry ---Why Machinists Like Working Here Machinists choose Crane... ...full benefits Opportunities to grow into CNC or advanced machining roles A culture...Hourly payFull timeMonday to FridayShift workAfternoon shiftCrane Aerospace & Electronics
Burbank, CA6 days ago- ...CNC Lathe Operator The CNC Machine Operator is responsible for setting up, operating, and maintaining CNC (Computer Numerical Control) machines to produce precision parts and components according to specifications. This role requires an individual with strong technical...Hourly payPermanent employmentTemporary workFor contractorsImmediate startFlexible hours
$34 - $40 per hour
...level three, without assistance level four machinists demonstrate the ability to set up, run and trouble shoot all specific CNC and conventional machines and machining processes... ...and set up CNC or conventional mills and lathes Inspect produced components per blueprint...Hourly payPermanent employmentFull timeWork at officeWorldwideDay shiftPrecision Castparts Corp
North Hollywood, CA3 days ago$22 - $32 per hour
...Job Description CNC Operator Location: Sylmar, CA Pay: $22-$32/hour (DOE) Position Summary: We are seeking... ...Responsibilities: Set up and operate CNC machines (mills, lathes, or routers) according to job specifications Interpret...Local areaUltimate LLC
Sylmar, CA6 days ago- ...is a full-time, on-site role for a Computer Numerical Control (CNC) Machinist located in Los Angeles, CA. The CNC Machinist will be... ...Machinery Experience in CNC Programming Experience with Lathe Machining and Programming Experience with HAAS and Fanuc controls...Full timeFlexible hours
FORMIDABLE ENGINEERING TECHNOLOGIES
North Hollywood, CA4 days ago $25 - $30 per hour
...Hydraulics International, Inc (HII) seeks a CNC Mill Machinist to work with both software and hardware, conduct tests and inspections of products... ...with the latest state-of-the-art equipment such as CNC lathes and mills, computerized tube bending, and automatic press brake...For contractorsWorldwideHydraulics International, Inc.
Chatsworth, CA6 hours ago- ...Machinist-Programmer At WET (Design), we don't just machine parts—we build experiences that are admired around the globe. As the... ...of programming, setup, and operation of state-of-the-art CNC mills, lathes, and multi-axis machines. You'll work primarily with Haas and...Shift work
WET Design
Sun Valley, CA5 days ago $27 - $33 per hour
...CNC Machinist Level I Contract to long-term hire 1st Shift 630 AM Start Time Pay is $27-$33/hour Job Summary: The CNC Machinist... ...assigned machining tasks prior to operating Haas milling machines or Lathes. This role requires attention to detail, precision, and a...Contract workDay shiftCalTek Staffing , Inc.
Valencia, CA4 days ago$34 - $46 per hour
...CNC Machinist II/III Are you looking for an opportunity for a long-term career where you can continue to grow your skill set? This full... ...DART mission, and more. If you have previous CNC Mill or CNC Lathe set-up and operation experience, and a drive to learn and grow...Full timeLocal areaMonday to FridayShift workDay shiftAfternoon shiftTERRA Staffing Group
Burbank, CA6 days ago$53k - $83k
...CNC Machinist Salary: $53-$83K Location: Valencia, California 91355 Industry: Aerospace Job Summary The Tool Room Machinist... ...wide range of machining equipment, including HAAS CNC machines, lathes, EDM systems, and other precision tools. The machinist ensures...Amtec Staffing
Santa Clarita, CA4 days ago$20 - $50 per hour
...Job Description Job Description CNC Machinist Description: If you have CNC Mill or Lathe Experience and you're looking for a new position ASAP, then this is the position for you! A popular aerospace company in Valencia who manufactures various Aerospace...Weekly payContract workTemporary workWork at officeImmediate startShift workAerotek
Valencia, CA15 days ago- 1st Shift Lathe Machinist Level 4 This position is focused on the production of high-quality machined parts. The role involves operating lathes and ensuring precision in machining operations. Responsibilities include setting up and operating machinery, maintaining equipment...Day shift
$24 - $29 per hour
...Cnc Set-Up Machinist I 2nd Shift This job will provide you with an opportunity to further your career alongside some of the best and most... ...part of the team you would set up, operate and monitor CNC lathes and milling machining centers to meet job specifications....Hourly payPermanent employmentFull timeLocal areaImmediate startWorldwideWork visaAfternoon shift$21 - $35 per hour
...operations on raw material including those used for aerospace bushings. May run one or more machines on a regular basis. Each machinist is responsible for ensuring that machine work meets dimensional tolerances as noted on shop planning and that defects are removed...$33 per hour
...Now Hiring Machinist Burbank, CA Pay Rate: Up to $33.00 per hour Shift: Days... ..., we've got work waiting in Burbank. Run CNC and manual machines, hit tight tolerances... ...8 years running manual or CNC machines, lathes, or mills (Haas, Mazak, Okuma a plus)....Hourly payWeekly payImmediate startFlexible hoursShift workStaffmark
Mission Hills, CA5 days ago- ...Sr. CNC Machinist (CNC Mills + CNC Lathes) WET Design Sun Valley, California WET has established itself as a visionary design company. Our designs blend form, material, patterns, acoustics and more to create spectacular places that visitors connect with. WET has...
- ...Job Description Job Description Position Summary We are seeking an experienced Aerospace CNC Mill/Lathe Machinist to set up, operate, and troubleshoot CNC machining centers and lathes in a fast-paced aerospace manufacturing environment. The ideal candidate will have...Temporary workDay shiftAfternoon shift
AppleOne
Valencia, CA7 days ago - ...off * Training & development * Wellness resources Senior Machinist - AS9100 Aerospace Machine Shop Location: Pacoima,... ...manufacturing processes. Responsibilities * Set up and operate CNC mills and lathes * Review engineering drawings and specifications * Work...Work experience placement
American Precision Tool & Engineering
Pacoima, CA6 days ago $23 - $27 per hour
...Job Description Job Description machinist-set-up lathe Overview The CNC Lathe Set Up sets up and operates with little supervision, working from traveler, blueprint with sequence operations. Hourly Rate: $23.00 - $27.00 Duties and Responsibilities CNC...Hourly payPermanent employment
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to CNC Lathe Machinist. Be the first to apply!
