QA/QC Inspector - Oxford, AL

Epsilon is a leader in the Off-Site Construction (OSC) industry, delivering mechanical/electrical-centric systems in a modular, prefabricated form, optimized for a streamlined on‑site completion by us or others. Job: QA/QC Inspector Reports to: Quality Manager Job Summary The QA/QC Inspector performs in-process and final inspections of fabricated, welded, structural, and piping assemblies. This position ensures work complies with applicable codes, approved drawings, customer specifications, project requirements, internal procedures, and Epsilon Industries’ Quality Management System (“QMS”). The QA/QC Inspector works closely with Production, Welding, Engineering, Project Management, and Quality personnel to identify and resolve quality concerns, maintain accurate inspection records, and promote continuous improvement. This is a fully on‑site position. The employee will complete a minimum 90-day on‑site training period at Epsilon Industries’ Tuscaloosa, Alabama facility and will receive a per diem of $500 per week during the training period. Upon completion of training, the position will transfer to and remain fully on‑site at Epsilon Industries’ Oxford, Alabama facility. Job Duties & Responsibilities Perform receiving, in-process, hold-point, and final inspections. Inspect structural steel, piping, mechanical assemblies, welded components, materials, and workmanship. Verify compliance with current approved drawings, specifications, AWS D1.1, applicable ASME requirements, and customer/project requirements. Inspect weld fit-up, joint preparation, alignment, dimensions, tolerances, and completed welds. Verify material identification, certifications, and traceability. Verify required inspections, pressure tests, NDT, and other testing activities where applicable. Read and interpret shop drawings, piping isometrics, weld symbols, weld maps, and fabrication details. Perform and document inspections electronically using company‑issued tablets and approved inspection software. Record inspection results, measurements, photographs, deficiencies, and supporting documentation at the time of inspection. Maintain complete and accurate electronic inspection records to support traceability, NCRs, quality reporting, and project turnover. Identify and document nonconforming conditions and initiate or support Nonconformance Reports (NCRs). Verify completed repairs, rework, and approved dispositions where assigned. Participate in root cause and Corrective Action activities when required. Support customer, third‑party, and internal audits and inspections. Support implementation and continual improvement of the Epsilon QMS at the Oxford facility. Work directly with Production and Engineering to resolve quality concerns while maintaining inspection independence and objectivity. Communicate significant quality or compliance concerns to the Quality & Process Manager. Qualifications High School Diploma or equivalent required. Previous QA/QC inspection experience in manufacturing, fabrication, construction, or a related environment. Ability to read and interpret fabrication drawings, piping isometrics, weld symbols, and technical specifications. Knowledge of welding, weld fit-up, visual inspection, and common weld discontinuities. Experience using dimensional measuring and inspection equipment.Understanding of material identification, traceability, and inspection documentation. Basic computer and tablet skills with the ability to learn and use Epsilon’s QMS, ERP, electronic inspection, and document‑management systems. Strong communication, organization, attention to detail, and problem‑solving skills. Preferred Qualifications AWS Certified Welding Inspector (CWI). ASNT Level II certification or NDT training in VT, MT, PT, or UT. Familiarity with AWS D1.1 and applicable ASME piping requirements. Structural steel, piping, mechanical, or modular fabrication experience. NCR and Corrective Action experience. Experience with material traceability and project turnover documentation. Experience supporting customer or third‑party inspections. Experience working within an ISO 9001‑based Quality Management System. Education & Experience High School Diploma or equivalent required. Technical school, trade‑school, welding, fabrication, or quality‑control training preferred. Experience inspecting fabricated and welded products in a manufacturing, fabrication, or construction environment required. Hands‑on experience applying AWS D1.1 requirements. Working knowledge of applicable ASME piping codes. An equivalent combination of education, training, certification, and relevant experience may be considered. Technical Qualifications Ability to read and interpret shop drawings, piping isometrics, weld symbols, weld maps, and fabrication details. Knowledge of welding processes, weld fit‑up, joint preparation, visual weld inspection, and common weld discontinuities. Ability to use measuring and inspection equipment accurately. Understanding of material identification, traceability, inspection records, and document control. Ability to document inspection results, NCRs, corrective actions, and supporting evidence clearly. Familiarity with VT, MT, PT, and UT methods and reports. Basic computer skills, including Microsoft Outlook, Word, Excel, and Teams. Ability to learn and use company QMS, ERP, and document‑management systems. Professional Skills Strong attention to detail and commitment to quality. Strong observation, documentation, and problem‑solving skills. Effective verbal and written communication skills. Ability to communicate quality concerns respectfully and objectively. Ability to work independently while collaborating with production and technical teams. Ability to interpret and consistently apply codes, specifications, and procedures. Strong organization, time‑management, and follow‑through skills. Ability to manage multiple inspection priorities and project deadlines. Sound professional judgment, integrity, and accountability. Ability to attend work regularly and dependably. Preferred Qualifications AWS Certified Welding Inspector (“CWI”) certification. ASNT Visual Testing Level I or Level II certification. Additional NDT training or certification in MT, PT, or UT. Experience with structural‑steel and piping fabrication. Experience preparing or managing NCRs and CAPAs. Experience with material traceability and project turnover documentation. Experience supporting customer or third‑party inspections. Exposure to Lean manufacturing or continuous‑improvement programs. Core Competencies: Welding and Fabrication Inspection Code and Specification Compliance Drawing Interpretation Quality Documentation NDT Support Attention to Detail Problem‑Solving Communication Objectivity and Integrity Teamwork Accountability Continuous Improvement Contacts: Internal Quality Manager, Quality personnel, Production supervisors, Welders, Fitters, Engineering, Project Management, Supply Chain, and Safety. External customers, suppliers, third‑party inspectors, NDT providers, certification representatives, and auditors as authorized. Effort (Physical & Sensory): Regular standing, walking, bending, crouching, kneeling, reaching, and climbing. Ability to access fabricated assemblies, piping systems, modular units, ladders, platforms, and limited‑access areas. Ability to lift and carry inspection equipment or materials weighing up to 50 pounds. Frequent use of measuring tools, cameras, inspection instruments, and computers. Ability to distinguish weld profiles, surface conditions, material markings, and visual indications. Ability to read drawings, specifications, labels, measurements, and computer displays. Ability to wear required personal protective equipment. Working Conditions: Work is performed primarily in manufacturing, fabrication, welding, warehouse, yard, and construction environments. Fully on‑site position in Tuscaloosa, Alabama. Regular exposure to noise, dust, fumes, welding operations, machinery, moving equipment, and varying temperatures. Work may require inspection of elevated, confined, or limited‑access areas when properly trained and authorized. Required use of personal protective equipment in designated areas. Occasional travel may be required. Overtime, alternate shifts, or weekend work may be required based on production and project schedules. Epsilon is an equal opportunity employer. We are committed to a workplace of diversity and inclusion. Epsilon encourages applications from all candidates that represent the full range of communities across USA. All qualified applicants will be considered for employment without discrimination on the basis of race, colour, age, religion, sexual orientation, gender identity, disability, national or ethnic origin or any other factors prohibited by law. Accommodations are available upon request, for all aspects of the recruiting process and thereafter. #J-18808-Ljbffr