Power Plant Mechanic
WIN Waste Innovations
Maintenance Mechanic
WIN Waste Innovations is looking for a Maintenance Mechanic who will be responsible for the installation, troubleshooting, cleaning, inspecting and maintenance of mechanical equipment throughout the facility in a safe and professional manner.
Responsibilities:
- Initiates and completes work-orders and requisitions and documents all critical and or pertinent information on a routine basis.
- Ability to use and become proficient with Computer Maintenance software (Tabware)
- Respond and report to work during off hours when emergency repairs are required/ ability to be on call.
- Troubleshoot equipment, diagnose problems, and make necessary repairs.
- Operate mobile equipment including, but not limited to, industrial forklifts, manlifts, skid steer type loaders, and other mobile equipment.
- Perform routine maintenance and repairs around facility grounds
- Identify and repair potential safety hazards
- Housekeeping: Maintains work areas in a clean, orderly, and safe manner
- May be required to work overtime hours during both planned and un-planned maintenance
- Cover vacancies and callouts when needed to support plant operation
Preferred Requirements:
- Tech Schooling Experience
- Proven mechanical abilities in previous jobs
- Experience with Oxy-Acetylene torch usage
- Ability to read and record measurements with precision
- Welding, soldering, brazing, pipe fitting
Certificates and Licenses
- Licenses as required by Local, State, Federal, Environmental and/or Health/Safety Regulatory agencies.
Work Environment:
Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job.
- Noise in work environment
Physical Demand:
- Stand
- Sit for prolonged periods of time
- Walk
- Handle tools, equipment, fine motor skills
- Reach with hands and arms
- Climb and walk on heights often greater than 4 feet
- Stoop, kneel, bend, push, pull, crawl
- Ascend and descend stairs and stationary vertical ladders as part of normal work activity and emergency egress situations
- Lift 50 lbs.
- Move about all areas of the plant, including catwalks, deck grating, and uneven surfaces
- Close vision, distance vision, peripheral vision, depth perception, corrected or otherwise
- Operate a 1.5-inch fire hose operating at 125 psi line pressure to the extent required to extinguish fire
- Operate fire extinguishing equipment ranging from handheld extinguishers to 200 lb portable units
- Access confined spaces and pressure vessels through standard 12" by 16" manways
PPE Required:
Work in areas under adverse conditions that may require the donning and use of personal protective equipment including, but not limited to, the following with average fatigue:
- Negative pressure respirator
- Positive pressure respirator
- Self-contained breathing apparatus (steel or composite bottle)
- Hardhat
- Approved safety shoes
- Eye protection
- Rubber suit and gloves
- Chemical resistant suit
- Heat resistant outerwear
- Flame resistant outerwear
- Approved hearing protection
- Gloves
- Safety harness
What You'll Enjoy:
- Industry leading benefits
- Multiple and flexible medical plans
- Outstanding PTO program
- Floating Holidays
- Strong 401k program and company match
- Tuition reimbursement plan
- College loan reimbursement
- College scholarship program for dependents
- Parental Leave Program
- Inclusive culture
- Employee engagement events
- Employee resource groups
WIN Waste Innovations is a waste management company committed to delivering essential waste management solutions to customers and communities supported by our team of 2,300 employees. We believe in preserving our environment for future generations while providing for today's needs. WIN Waste Innovations is a vertically integrated business with a platform of 50 strategically located collection, transfer, and disposal assets. These include waste-to-energy facilities, transfer stations, ash monofills, landfills, and fleets of rail cars and collection vehicles. We process more than 11 million tons of waste annually, converting 6.7 million tons of waste into clean, renewable energy that powers 340,000 homes. We recycle more than 234,000 tons of plastic, paper, and metals from the waste stream.
At WIN Waste Innovations, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short-Term Disability. As well as Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled.
- ...Devon Power Station is seeking a skilled Maintenance Mechanic to support the safe, reliable, and efficient operation of a 379-MW dual-fuel (natural gas and... ...overhauling GE LM6000 gas turbines, generators, balance-of-plant equipment, and associated mechanical systems....SuggestedLocal area
$26.54 per hour
Company Overview Check out this video and find out why our team loves to work here! ( Join Us! CDM Smith – where amazing career journeys unfold. Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful...SuggestedH1bImmediate startFlexible hours- Tool And Die MakerUnder the direction of the supervisor, either directly or through the leadperson, the tool and die maker is responsible for the proper set-up and operation of various tool room equipment with minimal supervision in the manufacture, repair or maintenance...Suggested
- ...Key Responsibilities: Perform routine maintenance and repairs on industrial equipment and machinery, including electrical, mechanical, and hydraulic systems Troubleshoot and diagnose equipment malfunctions and make necessary repairs Communicate with team members...Suggested
- ...DescriptionJob SummaryYou will perform a series of operations to assemble and test temperature sensors using a variety of hand and power tools. Instructions and training are provided. Experience in manufacturing/assembly is mandatory to be considered for this position....SuggestedFull time
$159.43k
Company Overview Check out this video and find out why our team loves to work here! ( Join Us! CDM Smith – where amazing career journeys unfold. Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful...Contract workFor contractorsWork experience placementH1bImmediate startOverseasFlexible hours- Jiffy Lube TechnicianResume NOT required. Bypass resume option by clicking 'next'.No experience required. On-the-job training. Start tomorrow!Job PurposeAs a Jiffy Lube Technician, you'll help keep our customers' vehicles running smoothly and safely.Duties and responsibilities...Immediate startShift work
- Resume NOT required. Bypass resume option by clicking 'next'. No experience required. On-the-job training. Start tomorrow! Job Purpose As a Jiffy Lube Technician, you'll help keep our customers' vehicles running smoothly and safely. Duties and responsibilities...Immediate startShift work
- ...Description Job Description Are you the kind of machining professional who takes pride in holding tight tolerances, solving mechanical challenges, and producing precision parts that meet exact specifications? If so, Horberg Industries Inc. in Bridgeport, CT is looking...Hourly payFull timeFlexible hoursShift work
$28.57 - $32.51 per hour
...heights in all weather conditions. Repair, remove and/or replace mechanical parts of lifts as necessary, both on hill and in repair shop.... ...adverse weather conditions. Provide own set of basic hand and power tools. Must have a neat and clean appearance in compliance with...Flexible hoursShift workWeekend workAfternoon shift$35.59 per hour
...level. Job Description: Maintenance Mechanic or Industrial Electrician position... ...industry this position is also known as Plant Mechanic or Industrial Mechanic. This position... ...equipment such as conveyors, bulk carts, and power industrial equipment Requirements:...Weekly payPermanent employmentFull timeTrial periodShift workNight shift- Randstad - - Responsibilities: Perform preventive maintenance on equipment; Repair mechanical, pneumatic, and hydraulic systems; Respond to emergency equipment failures; Maintain safety and reliability of facility infrastructure
$35.59 per hour
...Maintenance Mechanic or Industrial Electrician Explore your next opportunity at a Fortune Global 500 organization... ...Performing preventive maintenance inspections of plant equipment such as conveyors, bulk carts, and power industrial equipment Requirements:...Weekly payPermanent employmentFull timeTrial periodShift workNight shift$45 per hour
Tyler Air is seeking an energetic Journeyman HVAC Service Technician for their Stratford, CT location. About Tyler Air: Since 2005, Tyler Heating, Air Conditioning & Refrigeration has provided heating and cooling for homes and businesses throughout Southern Connecticut...Hourly payFull timeTemporary workLocal area- Job Description Job Description Description: Benefits Sign-On Bonus on qualified experience over 10 years, Discretionary Quarterly bonuses & recruiting incentives Paid travel Company van + gas card for eligible techs Paid training and career advancement...Full timeApprenticeshipLocal areaRelocation package
- Job Description Job Description Benefits/Perks Flexible Scheduling Competitive Compensation Career Advancement Opportunities We are looking for a skilled and experienced HVAC Technician to join our team! In this role, you will install, service, or repair...Flexible hours
- Production TechnicianWe are seeking a Production Technician in our Newtown, CT facility where we finish wafer tables for use in the semiconductor industry. This role sets up and utilizes specialized equipment to precision finish our unique materials. 2nd shift 3:00PM -...Monday to FridayShift workAfternoon shift
$45 - $55 per hour
Tyler Air is seeking an energetic Journeyman HVAC Service Technician for their Stratford, CT location. About Tyler Air: Since 2005, Tyler Heating, Air Conditioning & Refrigeration has provided heating and cooling for homes and businesses throughout Southern Connecticut...Hourly payTemporary workLocal area- ...CNC machines.Excellent troubleshooting and problem-solving skills.Ability to work with precision and attention to detail.Strong mechanical aptitude and hands-on experience with tool fabrication and repair.Ability to work independently and collaboratively in a team environment...Full timeMonday to Friday
- We are currently looking for a Die Maker who is capable of maintaining & troubleshooting production dies, working with minimal supervision, and has at least 5 years experience in a job shop environment. This is a 1st shift full time position. We are an Equal Opportunity...Full timeDay shift
- Job Description We are seeking a Production Technician in our Newtown, CT facility where we finish wafer tables for use in the semiconductor industry. This role sets up and utilizes specialized equipment to precision finish our unique materials. 2nd shift 3:00PM -...Monday to FridayShift workAfternoon shift
$45 - $65 per hour
...Full-service commercial mechanical contractor recognized for innovation and vertical integration is hiring a Medical Gas Piping Mechanic. Comprehensive compensation package includes competitive pay ($45-$65/hour + OT, DOE), medical/dental/vision, 401(k) with employer...For contractors$38 - $50 per hour
...HVAC Chiller TechnicianNew England Mechanical Services is currently seeking an HVAC Chiller Technician with a D2 or S2 license to perform maintenance, repairs, troubleshooting and retrofits on air-cooled and water-cooled chillers and boilers (water/steam).Essential Duties...Local areaFlexible hoursWeekend work$45 - $55 per hour
...seeking a skilled HVAC installer, HVAC service technician, or HVAC mechanic with residential and commercial HVAC experience to perform... ...homeowners to explain work and address HVAC concerns Use hand tools, power tools, generators, and related equipment safely Understand...Hourly payTemporary workLocal area- Job Type Full-time Description Connecticut HVAC Technicians & Installers - $5,000 Sign-On Bonus! This application is for CT trade licensed journeymen license types: D1, D2, S1, S2, S10, SM2, S4 Why Encon? ~$5,000 Sign-On Bonus for eligible licenses...Full timeRelocation package
$26 - $48 per hour
...lift 50+ pounds and work in attics, basements, crawl spaces, and on ladders, with or without reasonable accommodation Strong mechanical aptitude, troubleshooting skills, and attention to detail Ability to communicate effectively with customers and team members...Hourly payFull timeFor contractorsLocal area- Car Electronics Installer As a Car Electronics Installer, you'll install new technology into customers' vehicles in the installation bay of our local Best Buy store. You'll also share advice, best practices and product recommendations with customers and other employees...Hourly payFull timePart timeLocal areaRemote workWork from home
$19 per hour
Job Title We have operations in Saint Louis, Missouri, Huntington Beach, California, and Milford, Connecticut, serving local, national and international customers, both military and commercial. The company supplies platform controls, aircraft components, liquid oxygen...Local areaFlexible hours$17.18 - $48.35 per hour
...Job Description Job Description The Arcticom Group (“TAG”) is a U.S.-based network of commercial and industrial mechanical services companies that provide HVACR service, maintenance, and installation services throughout North America. TAG is committed to being an...Hourly payLocal area$18.77 per hour
...Check and inspect parts by using a gage or visual and sign off on it at fixed intervals. Check machine, if it stops and notify Mechanic or Foreperson of any issues. Maintain housekeeping in your work area. Cover a machine for another employee when on break....Hourly payFull timeDay shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Power Plant Mechanic. Be the first to apply!





