Control Systems Technician
TDX Quality
TDX Global Solutions, located in Swedesboro, NJ, just outside Philadelphia, designs power generation and balance-of-plant controls and builds custom switchgear for critical power systems. Our control panels integrate programmable logic controllers, electrical metering and protective relaying, and touchscreen operator interfaces running graphical HMI software. We deliver systems for commercial and government clients. Most of our work is in the greater Philadelphia area, and we have installed systems across the country.
JOB SUMMARY: TDX Global Solutions is seeking a Control Systems Technician to build, test, and support the control panels and switchgear we deliver for critical power systems. Working from engineering drawings and under the direction of the project engineer, the technician builds and wires control panels, installs control components in switchgear assemblies, takes part in factory acceptance testing, and performs firmware updates and basic device configuration. The role also supports day-to-day shop operations, including material handling and inventory, and travels to customer sites to support installation, startup, and commissioning. ESSENTIAL DUTIES AND RESPONSIBILITIES:- Build and wire control panels from electrical schematics, wiring diagrams, and panel layouts: mount components, route and dress wiring, crimp and terminate conductors, and label wires and devices to drawing.
- Install and wire control components, including PLCs, protective relays, meters, HMIs, power supplies, and terminal blocks, in switchgear assemblies.
- Perform point-to-point wiring verification and pre-power checks before panels and switchgear are energized.
- Participate in factory acceptance testing (FAT) of control panels and switchgear, including I/O checkout and functional testing, and record test results.
- Load firmware and perform basic configuration of PLCs, HMIs, protective relays, meters, and network devices as directed by the project engineer.
- Set up and verify device communications over industrial networks using protocols such as Modbus and OPC.
- Troubleshoot wiring, device, and communication problems in the shop and in the field, and redline drawings to reflect as-built conditions.
- Support installation, startup, and commissioning at customer sites, including overtime shifts and travel of up to three weeks at a time.
- Receive, stage, and kit materials, keep inventory records current, and help maintain a clean, organized shop.
- Follow all TDX and customer environmental, health, and safety programs, including lockout/tagout and electrical safety practices.
- Associate degree in electrical or electronics engineering technology, completion of a trade or technical school program, or equivalent work experience.
- Ability to read and work from electrical schematics, wiring diagrams, and panel layouts.
- Working knowledge of industrial control components and of industrial communication protocols such as Modbus and OPC.
- Proficiency with hand and power tools, wire crimping and termination tools, and a digital multimeter.
- OSHA 10-Hour certification, or the ability to complete it within 30 days of hire.
- Valid driver's license in good standing, issued by the state of residence.
- S. citizenship and the ability to obtain and maintain a Department of Defense Secret security clearance.
- Valid U.S. passport, or the ability to obtain one, for international travel.
- Willingness to work overtime and to travel domestically and internationally for up to three weeks at a time.
- Four or more years of experience in control systems, panel building, or switchgear.
- Experience with switchgear, generator controls, protective relays, or PLC/HMI platforms.
- NFPA 70E electrical safety training.
- Computer skills, including word processing, spreadsheets, and email, and the ability to view and mark up drawings in AutoCAD.
- Strong mechanical and electrical aptitude, attention to detail, and pride in workmanship.
- Strong organizational and time-management skills.
- Clear verbal and written communication and effective interpersonal skills with engineers, coworkers, and customers.
- Ability to work independently and take on a range of technical roles as project needs change.
- Work is performed in a fabrication shop and at customer sites, including electrical rooms, generator enclosures, and outdoor locations in varying weather.
- Regularly stands, bends, kneels, reaches, and climbs ladders; may work in tight or elevated spaces.
- Must be able to lift and carry up to 50 pounds.
- Must wear required personal protective equipment, including arc-rated clothing where required, and may work near energized electrical equipment and in high-noise areas.
- Pay range based on experience and qualifications. Overtime is paid in accordance with applicable law.
- Benefits: Medical, dental, and vision insurance; 401(k); paid time off; paid holidays.
- ...sophisticated electronics and computing systems, including radar, communications, navigation, local area networks, weapons fire control, and Aegis combat systems. ETs and FCs form... ...Serve as an Electronics Technician (ET) or Fire Controlman (FC) after training...SuggestedApprenticeshipLocal areaRotating shift
$18.5 - $20 per hour
...Technician I, FSQA-Bakery As a leader and innovator in the snack food industry for over 50 years, J&J Snack Foods provides branded... ...immediately. Support the Hazard Analysis & Risk-Based Preventive Controls Food Safety Team in the participation of an effective Food...SuggestedHourly payLocal areaImmediate start- ...is hiring an experienced Field Service Technician responsible for diagnosing, repairing, and... ...vehicle, in addition to battery systems, is key to success in this position. *... ...high voltage (HV) electrical diagnosis, controls, and module programming. Apply in-depth...SuggestedContract workLocal areaRemote workNight shift
- ...Controls Technician Location: Eddystone, PA, US, PA 19022 Barry Callebaut is a global organization poised for growth; a company which has... ...perform planned maintenance and preventative maintenance on system components. Maintain and troubleshoot PLC/HMI systems. Maintain...SuggestedNight shiftRotating shift
$21 - $38 per hour
...mechanical equipment (conveyors, robots, motors, pneumatic devices, control devices, scanners, photo-eyes, etc.). Understand equipment... ...Analyze technical requirements and effort associated with test systems, products, and STB repair and clean and screen processes. Generate...SuggestedHourly payWeekly payLocal areaWorldwideMonday to FridayFlexible hoursDay shift$40 - $50 per hour
...Maintenance Technician $40 - $50 per hour | Logan Township, NJ | On-site | Permanent Industrial... ...& Instrumentation | PLCs | 480V Systems We are an industrial manufacturing company... ...electrical, instrumentation, and process control systems that keep our facility running....Hourly payPermanent employmentApprenticeshipLocal areaFlexible hours$45 - $47 per hour
...as production needs dictate. We're hiring an Electrical Controls Technician for a large commercial bakery in Swedesboro, NJ. You'll maintain... ...plant-wide electrical, automation and process control systems on high-speed food production lines, and provide technical leadership...Temporary workLive inVisa sponsorshipAll shiftsShift workWeekend workDay shiftAfternoon shift- ...and reassembly of shop mechanical and electrical components such as: Gearbox maintenance Switchgear Junction boxes Control systems & Control Panels Pumps Motors LANGUAGE SKILLS Ability to read and interpret documents such as safety rules,...
- ...accordance with blueprints, layouts, schematics of circuits and controls, and written or verbal instructions. § Duties range from... ...etc. § Perform safety inspections on all equipment/electrical systems to ensure safe operating conditions and immediately report any...Work experience placementWork at officeImmediate startFlexible hoursShift work
$32.31 - $40.38 per hour
...Maintenance Technician II Conveyor Systems OnTrac is hiring Maintenance Technician II Conveyor Systems in Logan Township! OnTrac is seeking... ...Handling Systems (MHS), industrial conveyor systems and controls, VFDs, PLC, Electronic motors (480V). Programming, GUI and...Hourly payFull timeTemporary workFlexible hoursShift workWeekend work- ...This role provides essential hands-on support and troubleshooting for commercial AV systems, including displays, audio, control, UC platforms, and AV-over-IP environments. The technician will be responsible for diagnosing and resolving issues on-site, ensuring systems...Temporary work
$24 - $30 per hour
...Description Job Description Low Voltage Field Services Technician II- Access Control Company Name : Logic LC Pay Range: $24.00- $30.0... ..., and troubleshooting of security cameras, access control systems, and alarm systems. This position requires independent...Hourly payFull time- ...providing operations and maintenance expertise on water treatment systems for our customers from one of a variety of industries. This... ...Responsibilities: \n \n \n Carry out mechanical, electrical, and controls troubleshooting on equipment such as valves, air compressors,...Contract workH1bImmediate startRemote workFlexible hours
- ...and company standards. Uses technical publications or automated systems in maintaining vehicles to prescribed manufacturers'... ...weight 310 lbs. (includes all PPE worn)Use their hands to handle, control, or feel objects, tools, or controls.Stand for long periods of...Full timeLocal areaMonday to FridayFlexible hours
- ...Summary We’re looking for a hardworking Instrument and Control Maintenance Technician to join our team! Responsibilities include installation,... ...(PLC), automatic control valves, distributed control systems (DCS). ~ General experience with Variable Frequency Drive...Night shiftWeekend work
$22 - $40 per hour
...Enjoying Work-Life Balance HVAC Service Technician Swedesboro, NJ $22 ‒ $40 Hourly Apply for... ...of Residential & Commercial HVAC systems. SPS requires its employees to prioritize... ...conditioning, air quality, refrigeration, and control systems Knowledge of low & high voltage...Hourly payFull timeApprenticeshipRelocation package$40.25 per hour
...you passionate about industrial automation and solving complex equipment challenges? As a Controls Technician, you'll play a key role in supporting automated manufacturing systems by troubleshooting controls-related issues, improving system performance, and helping ensure...Work at officeLocal areaImmediate startNight shift3 days per week$23.5 - $25.5 per hour
...Job Description Job Description Field Service Technician II Join Toshiba America Business Solutions as a Field Service Technician... ...training, or support of copier and office equipment, Photo ID systems/software, printers, ID Badge systems, fingerprint equipment,...Hourly payInternshipWork at office- ...hear from you. Fairbanks Scales is seeking a dedicated Scale Technician to join our dynamic team. About Us: For more than 190 years... ...calibrating, and repairing various types of scales and weighing systems. From bench scales to truck scales, you'll ensure the accuracy...Work from homeMonday to FridayFlexible hoursWeekend work
$92.5k - $171.5k
...have every other Friday off) L3Harris Technologies Power Systems is an agile defense technology innovator, delivering end-to-... ...for the US Navy Shipbuilding programs. With capabilities in ship control systems, manufacturing and turn-key ship overhauls that meet...Local areaFlexible hours$24 - $25 per hour
...Field Service Technician I, Lead The Field Service Technician will support our fuel cell products currently installed in electric lift... ...of high-pressure hydrogen storage, delivery and fueling systems. May include maintaining ongoing communication with customer...Shift work- ...Pharmacy Technician Performs the manual technical tasks involved with the proper storage, distribution, packaging... ..., associated record keeping and patient charging systems. Works under the direct supervision and control of a Registered Pharmacist. Follows proper...Daily paidFull timeShift work
$28 - $35 per hour
...Troubleshoot and repair electrical issues, including working with PLC-controlled equipment and changing fuses as required. Use a tape... ..., repair, and adjustment of industrial components and systems. ~ Hands-on electrical maintenance experience, including troubleshooting...Weekly payContract workTemporary workSummer workCasual workImmediate startMonday to FridayDay shiftAfternoon shift- ...the heart of automation. As aMaintenance Technician II, you'll support the operation,... ...cutting-edge robotic and material handling systems within adynamic client facility. From hands... ...experience with automated conveyor systems and controls. + 2+ years' experience conducting...Hourly payWork at officeVisa sponsorship
$31.09 - $36.02 per hour
...Ready to bring your best?The Maintenance Technician position is responsible for performing... ..., predictive and productive maintenance systems and processes to support the achievement... ...systems, motors, gearboxes, VFD/HMI/Servo controls, conveyors, printers, valves, sensors,...Hourly payShift workNight shiftWeekend workAfternoon shift$30 - $40 per hour
...the Opportunity Our client is seeking a skilled Maintenance Technician to support a growing food manufacturing operation. This position... .... Diagnose mechanical, electrical, pneumatic, hydraulic, and control-system issues. Replace motors, bearings, belts, chains, sensors,...Hourly pay- ...seeking a qualified Commercial HVAC Service Technician to join our organization. The successful... ..., air conditioning, and refrigeration systems. We are looking for a detail-oriented... ...including compressors, coils, motors, and control boards. * **Refrigerant Management:**...
- ...Job Description Job Description General Service Technicians (Oil, Tire & Lube) Join the World's Largest Midas Franchisee - Now Proudly... ...Mavis Tire Family! Put your career into high gear with Auto Systems Centers, the world's largest Midas franchisee! We have joined...Hourly payWeekly payFull timeImmediate startWeekday work
$50k - $60k
...Job Description Job Description Traffic Control Solutions Corp has immediate openings for Traffic Control Technician/Highway Safety Flagger positions in New Jersey for our Barnegat, and Swedesboro locations. If you feel that you meet all the requirements to be...Hourly payFull timeWork at officeImmediate startShift workNight shiftWeekend work- ...Description: Hawks, a leader in HVAC, is seeking a qualified Controls Tech to join our team! If you are seeking a role that combines... ...may be a good fit for you. Job Responsibilities Perform system design, preventative maintenance, repair, installation and commissioning...Shift work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Control Systems Technician. Be the first to apply!
- hospital technician Swedesboro, NJ
- product development technician Swedesboro, NJ
- logistics technician Swedesboro, NJ
- safety technician Swedesboro, NJ
- control technician Swedesboro, NJ
- icu technician Swedesboro, NJ
- human resources technician Swedesboro, NJ
- technician Swedesboro, NJ
- data center operations technician Swedesboro, NJ
- landscape technician Swedesboro, NJ




